Loading
Loading…
Loading…
1,423 results • Best match
Maintenance work of Dr. bhimrao ambedkar government Boys Hostel Kandoli Dehradun.
12 W LED inbuilt Battery, Semi integrated dusk to dawn solar street light- complete set with 60wp Solar module, GI pole & accessories. (NON SCHEDULED/EXTRA ITEMS)
CONSTRUCTION OF (SC) Dr. B R AMBEDKAR RESIDENTIAL SCHOOL COMPLEX AT RAVANDURU, PIRIYAPATNA TALUK, MYSORE DISTRICT.
Supplying, installation, testing and commissioning of solar hot water heater comprising of solar flat plate collector of size 2120x1040x100mm and stainless steel hot water storage tank with stainless ...
IMPROVEMENT TO EXTERNAL B R AND E M SERVICES INCLUDING AUGMENTATION OF ELECTRICAL AND WATER SUPPLY AT 257 SU AT 17 FBSU UNDER GE AF TRIVANDRUM
Supply and fixing solar cat-eye aluminium alloy shell (100% waterproofing design according to IP-65) of size 125 mm × 125 mm × 25 mm (shank 65 mm) with high-efficiency mono-crystalline solar panel 2.4 V / 0.3 watt, one Ni-ed rechargeable battery (1.2 V / 1600 MA), consisting of super-bright LED with 10,000 to 18,000 mcd, complete as per manufacturer’s instructions complete all as specified and as directed.
1. TOURIST DEVELOPMENT OF VISHWAMITRA PLACE, VISAUL, LOCATED IN HARLAKHI BLOCK UNDER MADHUBANI DISTRICT.
317 M/R Supply and Erection of 9 M Semi solar High mast with panel head frame and Foundation bolts. SITC of highly Efficient IP65 LED Hybrid Solar lighting system having minimum System lumen output as 11340 Lumen with maximum system wattage of 63W with 180lm/W. with inbuilt high efficiency solar panel and LIFEPO4 Battery and high efficiency microprocessorbased charge controller. Panel – 335W LifePO4 battery - 25.6V 60Ah and IP65 protection.4no. light on each Mast of 63 watt.all complete including Foundation,installation etc Each 1
Widening (2 Lane to 4 lanes) and strengthening, including 02 Major Bridges of the Intauja Mahona Kumhraon Kursi Deva Chinhat Road (MDR 88C) in District Barabanki from chainage 18.500 to 45.850
Providing and fixing of solar power road marker / solar studs. The solar studs shall be made of alluminium alloy and polycarbonate molded body with circular shape, solar powered,LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer. as per MORT&H 8.35 Suggestive
Provision and Construction of 02 x Store Shelter with all etc
Provisions and Construction for S for Wind driven Turbine Air Ventilator of 21inch dia made up of stainless steel body shall be provided on the top of roof in each shelter continue to see specification as per appendix