Solar Panels Tenders

Supply and fixing aluminium-alloy body Solar stud fix in repairs with following specification :- (a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight.(b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.(c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud.(d) Working time 3 to 4 days successively after the battery is fully charged. (e) Charging time for full charge One full sunny day. (f) Working temperature : 10 to 75 Degree Celcius. (g) Flash rate : 60 to 70 times per minute normally. (h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving.(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx. (k) Solar stud should be free of maintenance and operational in all weather conditions.(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess.Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank) (m) Weight of the Solar Stud should be 650 Gram approx. (n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface complete all as specified and as directed.

Unit - Each Supply of 60W All in One LED Solar Street lights vide having extruded aluminium housing, 200Wp or more (subjected to final panel backup calculation with dimming profile of 100% output for 2 hrs, 80% output for 2 hrs, 60% output for 2 hrs and 40% output for 6 hrs per day. The calculation is to be approved by SE,Electrical Circle (R&B) and CE ,Roads-l/ll, Odisha, BBSR before final procurement of the product.) Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 90 Ah (Bis certified) or more (subjected to final battery calculation with dimming profile of 100% output for 2 hrs, 80% output for 2 hrs, 60% output for 2 hrs and 40% output for 6 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) and CE ,Roads-l/ll, Odisha, BBSR before final procurement of the product.) Lithium Ferrophosphate (LiFePO4) battery (BlS certified) with inbuilt BMS, MPPT charge controller with >92% efficiency, PIR sensor ( when there will be no movement the lumens output will be 30% output) to provide 2 days( 24 hrs) back up. The luminaire should have lP 65 protection for critical components, lK08 for complete AIO solar light (As per lK report of third party/central/state govt accredited NABL lab ), having lumen output of > =11400 lumen (lumen efficacy >=190 lm/w) as per LM 79 report of third party/central/state govt accredited NABL lab to justify the lumen output & lumen efficacy.lK10 Lenses should be provided on the LED chip for better lighting distribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in lndia. The Solar lighting company must submit the third party/central/state govt accredited NABL lab reports to justify the lumen efficacy, luminaire output and lP 65 protection. The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole. The Solar Street light with solar panel having capacity of 200 Wp or more must be designed to take the wind load at 180 km/hr wind speed (As per wind load test report from third party/central/state govt accredited NABL lab). The Solar lighting manufacturer must submit the declaration letter mentioning that complete solar light and the solar panel are manufactured in lndia and warranty certificate on their company's letter head by mentioning warranty period as 5 years and necessary aftersales service will be provided through their tollfree base service network. The solar street light company must be having own NABL accredited laboratory. The make of the AIO solar light must be of Philips/Anchor by PanasonicMipro/LT or equivalent. The executant has to maintain the solar light for a defect liabilities period of 5 years.The solar lighting company must be having inhouse NABL lab having registered office in Odisha and Toll free service set up within 100 KM from the project site. The agency must submit the lighting design and get it approved by SE,Electrical Circle (R&B) and CE ,Roads-l/ll, Odisha, BBSR before final procurement of the product. The following test reports from third party/central/state govt accredited NABL lab must be submitted and approved from SE, Electrical Circle (R&B) and CE ,Roads-l/ll, Odisha, BBSR for the technical acceptance of the products. 1.LM 79, 2. lP 65 test report, 3. Wind load test report of 200 Wp panel fitted in AIO Street light suitable for 180 KM/Hr wind Speed.4,lK 08 (comptete tight) ,5. IK10 (For PC Lense of AIO) 6.LM-80 7. EN50530 8.tEC61547 9. tEC 60598-part 1 10. tEC 62109-1 11.tEC 62093 The contractor has to maintain all these solar street lights for a period of 5 years by considering all the expenses to be incured towrds labour charges /dismanatalling/reinstallation /Panel cleaning work etc.)

Supply of printed, Daily Solar Power and Energy Register as per sample. Material code: -4100000971

(vi) Detailed external services design and layouts (a) External electric supply (b) Solar power Generation (c) External water supply (d) Road path (e) Area drainage (f) Sewage disposal (g) Fencing (h) Special Services such as Fire fighting and external fire hydrant, central AC plant, cooling & heating appliances etc. (j) Arboriculture (k) Wind energy (l) Street lights (m) Lightning protection (vii) Detail estimates (viii) Preparation of tender documents