Solar Panels Tenders

specifications as amended, consisting of Mono/PolyCrystalline silicon solar cells, netmetering facility, necessary protections, earthing, mountedon Aluminium/GI structure of suitable strength with following components complete as required:- a)Solar Photovoltaic Module of capacity 330W poraove, manufactured in India,conforming to IS14286/IEC61215 ,IS/IEC61730-Part- 1, IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/systems must be warranted for their out put peak watt capacity,which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b)Power Conditioning Unit (PCU) of 350-800V DC Input voltage range and 400VAC, three phase,4wire,50Hz+/2.5Hz,output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c)Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules, main powercable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc.

Providing, Boring & Installing 150mm i/d straight MS Tubewell with hand boring methid up to 140 mtr. depth, Constructing 1 No RCC OHSR. of 25KL (25000Liters ) capacity having staging hight with sill level not less than15.50 m height 15.50 mtr. And FSL 17.20 mtr from formation level, Pumping Machinery, Disinfection Unit electrically based and Construction of pump chamber 3.05 x3.70 Mtr., complete in all respects , Providing, Laying, Cutting, Jointing & Testing of uPVC pipe (Type A) 10 kg/Cm2 for rising main & 6Kg/Cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving, dismantling of cement concreat road, interlock road and restoration to its original condition after laying of pipeline, House Hold Water Connection, Water Meter, Solar Panel, Development of water works site i.e. Corner Pillars, Barbed wire, Fencing Pole, D-Hooks, Gate Pillars, Foot Path, Concrete Sign Board, including Carriage of Material complete in all respect. WSS Akbar Wala, Block Makhu (Under Head Nabard-XXXI)

Wind .turbine energy generators training setup.

Providing erecting and commissioning Solar LED street light minimum 90 watt of reputed manufaturer,mounted on specified pole 9m long inclusive of 350(Wp) Class-A solar panel,90 Ah lithium Ion battery,sensor etc complete conforming to specification of MNRE, Govt of India) with 5 years of warranty.

solar power plant at various location as certified after the commissioning test at the

Supply of 60W All in One LED Solar Street lights vide having extruded aluminium housing, 200Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 90 Ah (Bis certified) or more Lithium Ferrophosphate (LiFePO4) battery (BIS certified) with inbuilt BMS, MPPT charge controller with >92% efficiency, PIR sensor to provide 2 days( 24 hrs) back up by considering dimming profile of 100% - 2 hr, 80% - 2 hr,60% - 2hr and 40% -6 hr per day . The luminaire should have IP 66 protection for critical components, IK08 for complete AIO solar light ( As per IK report of third party NABL lab), having lumen output of > 11400 lumen with lumen efficacy >190 lm/w as per LM 79 report of third party NABL lab to justify the lumen output & lumen efficacy of >190 lm/w . The Solar light must be having two nos. or more LED Compartment with IK10 Lenses on the LED chip for better lighting distribution on the road to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the lumen efficacy, luminaire output and IP 65 protection. The Luminaire should be supplied along with adjustable type die cast alluminium mounting bracket which can be fitted directly on the pole and 2 nos. or more supporting bracket must be there in luminaire housing to fix the these brackets in the pole so that the luminaire can sustain the desired wind speed . The Solar Street light with solar panel having capacity of 200 Wp or more must be designed to take the wind load at 180 km/hr wind speed (As per wind load test report). The Solar lighting manufacturer must submit the declaration letter mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letter head by mentioning warranty period as 5 years and necessary aftersales service will be provided through their tollfree base service network. The solar street light company must be having own NABL accredited laboratory. The make of AIO Solar lights must be of Philips/Anchor by Panasonic/Wipro/LT/Bajaj/ Crompton/Havells. The executant has to maintain the solar light for a defect liabilities period of 5 years.The solar lighting company must be having inhouse NABL lab having registered office in Odisha and Toll free service set up within 100 KM from the project site. The Solar lighting company must submit the lighting design to achieve 40 lux with Uniformity > =0.50 on the both the side road in full brightness mode when installed at a height of 9 mtr above ground ( Pole -8 mtr & height of U bracket -1 mtr) by keeping maintainace/light loss factor as 0.85. The successful bidder must submit the lighting design, TDS & following test reports in the department to obtain the approval from SE Electrical Circle (R&B) and CE Roads-I /II , Odisha bhubaneswar for technical acceptance prior to start of the work The following test reports must be submitted or the technical acceptance of the products from 3rd party NABL Lab/Central/State govt accrieditted laboratory only : 1.LM 79, 2. IP 65 test report, 3. Wind load test report of 200 Wp Panel fitted in AIO Street light suitable for 180 KM/Hr wind Speed.4,IK 08 (complete light) ,5. IK10 (For PC Lense of AIO) The AIO solar street light must comply to the following & necessary certificates of 60 W or higher wattage must be obtained in the name of lighting company from 3rd party NABL Lab/Central/State govt accrieditted laboratory to be submitted 1 EN50530 , 2. IEC61547, 3. IEC 60598-Part 1, 4. IEC 62109-1 5.IEC 62093 The contractor has to maintain all these solar street lights for a period of 5 years by considering all the expenses to be incured towrds labour charges /dismanatalling/reinstallation /Panel cleaning work etc. )