Loading
Loading…
Loading…
1,423 results • Best match
REPAIR TO LT EXTERNAL ELECTRIC SUPPLY LT CABLES, LT OF LINES LT PANELS AND CONNECTED WORKS AT SEWAR FORT AND PARADE GROUND AREA UNDER GE BHARATPUR
Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy , corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp, inbuilt MPPT charge controller, IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI, cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs, weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete all as specified. Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint.
SPECIAL REPAIR OF ROADS FROM FORT GATE TO SARASWATI KOOP AND OTHER UNIT AREA IN OD FORT UNDER GE (EAST) PRAYAGRAJ.
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc., complete all as specified and directed.
REPAIR /RECARPETING TO ROAD, ROAD SIDE PATH AND ROAD FURNITURE IN OTM ACCN UNDER AGE B/R II GE BABINA
Supply and Fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt NI-ed recharchable battary ( 1.2V/ 1600ma) consisting of super bright LED with 10000 to 18000mcd completed as per manufatures instruction etc completed all as specified and directed. Make : Sinor / Dark Eye / 3M/ Road Knight / Avery Dennison road Sign / Greenlite)euivelent in other make
REPAIR TO ROAD SURFACE, ROAD BERMS AND ROAD FURNITURE AT NABHA UNDER GE (S) PATIALA
Supply and fixing solar road stud/cateye shall be produced from an engineered polymer selected for superior impact resistance and weatherability. The top of the marker should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer-in-Charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting for solar energy into electricity, a illumination. The marker shall also have high reflective lenses for conspicuity in passive mode and dual shanks for applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height : 65+ 2 mm & maximum diameter : 136+ 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 & & IP 68 standards as per testing parameter requirement of MoRTH Section 800. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. Complete all as specified and as directed by Engineer-in-charge.
Installation of solar based deep borewell at Gargali Village health sub-centre under CSR Scheme 2025-26 of Kuju Area, CCL.
Providing and fixing solar power operated 3 HP Submresible pump AC 3 Phase input (ISI) including 3 solar controller, PV arry mono/ crystalline cells 3000 watts peak (Minimum 125 watt peak each PV module) mounting structure and tracking system, electronics and protections, MCB, Arry junction box, on off swithc, interconnection cable, complete as per MNRE approved techinal specifications and direction of Engineer -in- charge. (Note: The PV arry is to be installed on RCC roof of 3MX3 Minternal sized pump house with ceiling height 3M)
PROVN OF SOLAR OPERATED GEYSERS, SPL REPAIR OF SUBMAIN WIRING AND LT DISTRIBUTION SYSTEM IN CERTAIN UNITS AT JAISALMER MIL STN
S&F and Testing of MNRE registered/approved Solar water heating system indirect type with heat exchange provision, Capacity 200 LPD with two compartments (100 Litre each) ,with elctric back up heater of suitable capacity to achieve temperature 60 to 80 degree C as per manufacturer design suitable flat plate collectors having insulation of rock wool/mineral wool 50 mm thickness at bottom & 25 mm thickness on sides with toughned ,tempered glass 4 mm thick & clading with alum sheet 26 SWG,hot water storage tank as per manufacturer's recommendation of suitable gauge stainless steel plate (having insulation of rock wool/ mineral wool 100 mm thickness & cladding with alum sheet 24 SWG) polyester powder coated solar water heater Flat plate collector with high transmitive clear toughened glass glazing having absorber material as headers, risers and fins made up of 99.9% pure copper with selective black chrome coating with ultra sonic laser permanent bonding between copper fins & tubesell with inlet and outlet connections with collector top and bottom leg complete suitable for 200 LPD with minimum one year warranty alongwith MNRE registered/approved 200 LPD non pressurised FPC stainless steel hot water tank with inner tank material SS 304 , with thermostat and heater coil 2/3 KW to achieve temperature 60 to 80 C and suitable size of MS powder coated stand 32x3 mm angle frame with required PCC work 1:2:4 for foundation/fixing complete all as specified & directed by Engineer-in-Charge. Note :- Solar hot water system includes cost of two FPC plates and backup stainless steel hot water tank to meet the 200 LPD capacity. Other items will be measured separately under respective items as below.