Loading
Loading…
Loading…
1,443 results • Best match
Bid Documents of Construction of Both side Footpath Charkoshiya Naka thi Pooja Hosptial Sudhi Road Lunawada Nagarpalika Mahisagar 3rd Attempt
Solar Stud: Supplying of Solar Raised Pavement Markers made of
Bid Documents of Construction of Both Side Footpath at Pooja Hospital to Bus Stand to aagal Varadhari Chokdi par Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar 3rd Attempt
Solar Stud: Supplying of Solar Raised Pavement Markers
Development of Approach Road to Mangal Karyalaya Constructed by KSDB at Basavana Bagewadi Tq Vijayapur Dist.
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels wit...
Improvements to Ballavoor Main Road Connected to Ward No.14 at Basavana Bagewadi.
Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels wit...
REFER TO BOQ
Providing & fixing Solar LED Street Lighting Syastem Load Capacity 30W, Weight 15.5kgs, Batter Capacity 14.8/16AH, IP Rating IP66,IP65, Solar Module 60W/18V Monocrystalline with 5 years warranty, pole height 6mtr (complete Job)
Construction of a new road behind and adjacent to the Megha Market to control traffic congestion near the Shri Basaveshwara Temple and to facilitate the movement of tourist vehicle in Basavana Bagewadi Town of Vijayapur district
Solar Raised Pavement Markers Supplying & fixing of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand tempertures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typicl frequency of blinking is 1 Hz. There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours. The height, width and length of the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the Engineer.with all lead and lifts etc complete & as per directions of Engineer in charge of work.