Bid Documents of Construction of Both Side Footpath at Pooja Hospital to Bus Stand to aagal Varadhari Chokdi par Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar 3rd Attempt

Name of work : Construction of Both Side Foothpath at Pooja Hospital to Bus Stand to aagal Varadhari Chokdi par

Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar

Quantity Rate Per Amount

Demolition including stacking of serviceable materilas and

1 disposal of unserviceable materials with all lead and lift. (i)

Excavation for foundation upto 1.5 m depth including sorting

2 out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:4:8 (1-Cement : 4-

coarse sand : 8- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts carrying heavy traffic

4 as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(vii) 1200mm dia

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming and

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse

sand :4-stone aggregate 20mm nominal size) finished smooth

complete including curing and festing (i) Inside size 900mm

6 x 1200mm and 1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type

depth 2.25 Metre for 150mm diameter sewer. (III) Extra rate

for constructing B.B. masonry for every additional depth of

0.1M. or Part thereof over item No.24.27 (III) for depth from

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

7 per approved design Confirming to IS 15658 : 2006 including

35 mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidlines of IRC : SP 63-2018

Providing cement vata (10cm. x 10 cm. size) quarter round in

8 cement mortar 1:1 including neat cement finishing, watering

LUNAWADA NAGARPALIKA - LUNAWADA

Name of Tender : Bid Documents of Construction of Both Side Foothpath at Pooja Hospital to Bus Stand to aagal

Varadhari Chokdi par Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar 3rd Attempt

SCHEDULE - "B1"

Name of work : Construction of Both Side Foothpath at Pooja Hospital to Bus Stand to aagal Varadhari Chokdi par

Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar

Quantity Rate Per Amount

Providing and Fixing of Pre Cast PCC Kerb Stone (M-25) for

Divider/Foothpath in Line and Level including Filling the

9 joints with (1:3) Cement Mortar and Finishing it with neat

Cement Slurry (as per instructure of Engineer in charge with

necessary curing etc complete etc

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

10 and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

Extra for brick work in superstructure above plinth level

upto floor two level (B) Conventional

20 mm. thick sand faced cement plaster on wall upto height

10 meters above ground level consisting of 12mm thick

backing coat of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm thick

finishing coat of c.m. 1 : 1 (1 cement : 1 sand) etc. complete

Providing and fixing mirror polished 18mm thick Granite

with full round edge and polished of approved quality in

clading on sill and around the doors/ windows/ ventilation

with 20 mm thick cement plaster CM (1:4) and fixing with

cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

Filling in foundation and plinth with brick Bats Chhara in

13 layers of 20cm. thickness including watering, remming and

consolidating etc. complete

Providing and laying hot applied thermoplastic compound

2.5 mm thick including reflectorising glass beads at

14 grams / Sq.mt. area. Thickness of 2.5 mm is exclusive of

surface applied. Glass beads as per I.R.C. 35. The finished

surface to be level uniform and free from streaks and holes.

Supply and fixing cats eye (Simsonite) made out of Acrilo

beautile sterine injuction high compressed molding with

15 reflector made of MMC (prismatic type) size 12 cms x 6 cms x

2.5 cms, provided with bituminous adhesive 100 g. with each

unit for fixing (Engineer grade)

LUNAWADA NAGARPALIKA - LUNAWADA

Name of Tender : Bid Documents of Construction of Both Side Foothpath at Pooja Hospital to Bus Stand to aagal

Varadhari Chokdi par Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar 3rd Attempt

SCHEDULE - "B1"

Name of work : Construction of Both Side Foothpath at Pooja Hospital to Bus Stand to aagal Varadhari Chokdi par

Sardar Patel Statue sudhi Road Lunawada Nagarpalika Mahisagar

Quantity Rate Per Amount

Solar Stud: Supplying of Solar Raised Pavement Markers

made of polycarbonate molded body with circular shape,

solar powered, LED self illumination in active mode,

degree illumination and reflective panels with micro

prismatic lens capable of providing total internal reflection of

the light entering the lens face in passive mode. The marker

shall support a load of 20000 kg tested in accordance to

ASTM D 4280. The marker should be resistant to dust and

water ingress according to IP 65 standards and should

withstand temperatures in the range of 0 C to 70 C. Color of

lighting could be provided in red or yellow (amber) as per

16 requirement and typical frequency of blinking is 1 Hz. There

should be current losses of less than 20 micro-amperes at

V in sleep-charging mode to enhance the life of the marker

and a full charge should provide for a minimum autonomy of

50 hours. The height, width and length of the marker shall

not be less than 10 mm x 100 mm x 100 mm. Also, the surface

diameter of the marker shall not be less than 100 mm

respectively. The weight of the marker shall not exceed

Kilograms. Fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin

based adhesive as per manufacturers recommendation and

complete as directed by the engineer

Providing Supplying and Fixing of Concrete Bollard at

17 Crossing and Various lcoation for Saftey Precotations as

directed by Engineer in charge

Earthwork for embankment including breaking clods,

dressing with all lead and lift and including watering rolling

and consolidation of subgrade in layers at O.M.C. to required

dry density including filling the depression which occur

during the process using power roller 8T to 10T.(E) From

Borrow area within 3.0KM. leadn soil

Supplying and fixing reinforced concrete heavy duty non-

pressure pipes with collars for culverts carrying heavy traffic

19 as per IS 458-1991 specifications including setting the pipes

in C.M. 1:2 watering and laying (to level or slopes) of class

NP3 of following internal daimeters.(i) 300mm dia.

Constructing Brick masonry road gully chamber 500mm x

20 450mm x 600mm including 500mm x 450mm C.I. horizontal

grating wih frame complete

Add 18% GST Charge Rs.

Add 3% Consultacy Charge Rs.

Add 1% QC Charge Rs.