Solar & Renewable Energy Tenders

Power Conditioning unit with enclosure : Supply, transportation, installation and commissioning of Solar Power conditioning Unit consisting of following componants and features: 1) Variable frequency Drive with inbuilt MPPT, voltage range suitable for opertating pump-motor set of 1 HP to 20 HP, detail mention in Cl. 6.1. 2) Pwer input: DC source for 1HP, 2HP & 3HP. 3) Power inpu: AC/DC source or hybrid for 5HP and above. 4) Incomer: DC MCB 2 Pole 16 amp upto 5 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 5) Incomer: AC MCB 4 Pole 16 amp upto 5.0 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 6) Type II DC SPD of 40 KA. 7) Type II AC SPD of 40 KA for AC/DC of Hybrid input. 8) Dual input (solar/Grid) 25 amp changeover switch for 5 HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP. 9) Reverse protection diode 1600 VDC with heat sink. 10) Data Logger. 11) Remote monitoring system. 12) Should have built-in EMC filters. 13) IP 65 glands for cable in and out. 14) Min. IP 54 enclosure. For detail features, protections, RMS, Communication architecture, Security, Data storage, tolerance of various parameters, standeards to be qualified, etc. please refer to Cl. 6.1 of technical qualification. Note: AC SPD, AC MCB and Selector switch to be provided only for item no. 3(f) to 3(I) a) For 1 HP capacity Pump-motor set with DC input.

Power Conditioning unit with enclosure : Supply, transportation, installation and commissioning of Solar Power conditioning Unit consisting of following componants and features: 1) Variable frequency Drive with inbuilt MPPT, voltage range suitable for opertating pump-motor set of 1 HP to 20 HP, detail mention in Cl. 6.1. 2) Pwer input: DC source for 1HP, 2HP & 3HP. 3) Power inpu: AC/DC source or hybrid for 5HP and above. 4) Incomer: DC MCB 2 Pole 16 amp upto 5 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 5) Incomer: AC MCB 4 Pole 16 amp upto 5.0 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 6) Type II DC SPD of 40 KA. 7) Type II AC SPD of 40 KA for AC/DC of Hybrid input. 8) Dual input (solar/Grid) 25 amp changeover switch for 5 HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP. 9) Reverse protection diode 1600 VDC with heat sink. 10) Data Logger. 11) Remote monitoring system. 12) Should have built-in EMC filters. 13) IP 65 glands for cable in and out. 14) Min. IP 54 enclosure. For detail features, protections, RMS, Communication architecture, Security, Data storage, tolerance of various parameters, standeards to be qualified, etc. please refer to Cl. 6.1 of technical qualification. Note: AC SPD, AC MCB and Selector switch to be provided only for item no. 3(f) to 3(I) a) For 1 HP capacity Pump-motor set with DC input.

Power Conditioning unit with enclosure : Supply, transportation, installation and commissioning of Solar Power conditioning Unit consisting of following componants and features: 1) Variable frequency Drive with inbuilt MPPT, voltage range suitable for opertating pump-motor set of 1 HP to 20 HP, detail mention in Cl. 6.1. 2) Pwer input: DC source for 1HP, 2HP & 3HP. 3) Power inpu: AC/DC source or hybrid for 5HP and above. 4) Incomer: DC MCB 2 Pole 16 amp upto 5 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 5) Incomer: AC MCB 4 Pole 16 amp upto 5.0 HP, 25 amp for 7.5 HP and 10 HP, 40 amp for 15 to 20 HP as per IS/IEC 60947-2. 6) Type II DC SPD of 40 KA. 7) Type II AC SPD of 40 KA for AC/DC of Hybrid input. 8) Dual input (solar/Grid) 25 amp changeover switch for 5 HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP. 9) Reverse protection diode 1600 VDC with heat sink. 10) Data Logger. 11) Remote monitoring system. 12) Should have built-in EMC filters. 13) IP 65 glands for cable in and out. 14) Min. IP 54 enclosure. For detail features, protections, RMS, Communication architecture, Security, Data storage, tolerance of various parameters, standeards to be qualified, etc. please refer to Cl. 6.1 of technical qualification. Note: AC SPD, AC MCB and Selector switch to be provided only for item no. 3(f) to 3(I) a) For 1 HP capacity Pump-motor set with DC input.

OD23143/2026-2027:Supply, fixing, testing & commisioning of 36W(+/-2) All in One Solar street light with not less than 6000 Lumens light output and more than 160 Lumens per watt system efficiency. 50,000 burning hours as per L70. Built in maintenance free Lithium Ferro Phosphate Battery(Life Po4) with >308Wh capacity, 12v 60w solar panel module with ultra sonic sensor. The housing shall be made of CRCA Housing in non corrosive 500 hours NSS Salt spray tested finish and UV stabilised polycarbonate cover with lens for each LED's. MPPT Charge controller and driver efficency shall be greater than 90%. Equivalent to Philips BRP111 LED60/ kesslec /Osram and must have fied on existing octagonal pole