Loading
Loading…
Loading…
1,426 results • Best match
Replacement of Solar Inverter and accessories in the University Campus
OD35897/2026-2027 Replacing 250W damaged Solar Panel Including labour charge
Supply, errection, commissioning & testing of 50 KVA MPPT solar hybrid roof top inverter
Description :Supply, errection, commissioning & testing of 50 KVA MPPT solar hybrid roof top inverter 3-p hase, solar+ grid power, 6000 watt panel, Lithium Fero Phosphate battery 100 AH DC voltage 96 V with sol ar module required accessories confirming MNRE specification [Attached in document section]. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE/EL/HTE, SER Jharkhand 2.00 Set Inspection Details Stage Inspection Not Required
SITC of Street Light System of HAL Sunabeda with Led Light and hybrid Led Light System with Cabling
Supply, Installation, testing and commissioning of 60W all-in-one Hybrid solar LED street lights manufactured from Pressures aluminium Sheet , suitable for outdoor pole mounting and fully self-contained with minimum IP65/IP66 weather-resistant protection. The luminaire shall deliver 60W LED output with minimum luminous efficacy of ≥160 lm/W, cool white colour temperature of 5000K–6500K, LED life ≥50,000 hours, and beam angle of 60° or as required, operating in dusk-to-dawn mode with motion sensor and/or Fixed dimming . LM-79, LM-80 +TM-21 ( LED Life), IP Test tested report to be attached. Operating Voltage Range 12.8 VDC . The battery shall be LiFePO₄ or lithium-ion type with minimum 78 Ah capacity, Panel Type : Mono-Crystalline and 150-190 Wp Max , Input Power 12.8VDC, Low Voltage cut off Nominal and +/- variations 11.4 VDC, Duty Cycle: 1st 2 hrs 100%, 2nd 1 hrs 60%, 3rd 1 hr 50%, 4th 8 hrs 40% or better or Min 2 nights Back Up. Note: If battery voltage reaches below 30% load will be on in differential dimming mode, or PIR Mode Indications,Battery Low Voltage, Red LED Glow, Battery Charging, Green LED Blink, Battery Full Charge Green LED Glow, Load Short Ckt, Green & Red LED Blink ,Protections: Battery deep discharge cut off Overcharge Reverse polarity Short circuit No Load/ Open Load Overload Dusk to Dawn SPV reverse polarity No flow of current through battery to panel.Adjustable Bracket: Tiltable Adapter Coupler 90°,100°,110°,120° Degree, Mechanical Dimensions to be mentioned in the bid and Housing Material: Die cast ALuminium, IP 65 or better , Dusk to Dawn Operation Provided Dimmability ,Dimmable / Non-Dimmable: Dimmable,Charge Controller Type : MPPT based intelligent controller(Solar+AC Hybrid function: Luminarie shall operate on solar Power primarily and Automated changeover to AC Supply in case of Low battery.Warranty shall be minimum Five (5) years on the product and five (5) years on the solar panel.
Improvement of Water distribution network at Sidli-Chirang Block (ID-1025, Activity Code - 126153680)
Providing, installation and commissioning Solar submersible pump and Centrifugal pump (with different heads) with Power unit (Solar Modules), Controller, Module mounting Structure, Tracking (Manual Sun tracking system), 3 core cable, earthing, lighting protection, Civil work (excavation and installation of base for panels), miscellaneous accessories, Solar module cleaning system, all items conforming to relevant IS/IEC standards with warranty of 5 years and transporation to Guwahati, Assam for the following capacity as directed by department
REPAIR AND DAY TO DAY MAINTENACE OF STREET LIGHT, LT CABLE AND ALLIED WORKS AT CERTAIN UNIT AND 495 UNIT UNDER GE DEHU ROAD
S&F in repair Smart Integrated Solar All In One with > 140Lum/W, 40 Watt power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery 24AH Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install. MAKE :- Crompton,Helonix,Orient
S/E of reflectors and Solar Studs for Various main roads of Patiala. Est Cost Rs. 16.17 lacs dt 22/23.06.2026
Providing and installation of solar cateye produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the solar stud should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The Solar stud shall be round in shape for providing illumination in all directions. The solar stud shall also have high reflective lenses for conspicuity in passive mode and dual shanks for improved road presence. The solar studs are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cateye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 4 mm. The body of the solar cateye shall be resistant to dust and water ingress as per IP 65 standards. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. Road Delineator/Vertical Guide Post Delineator