Loading…
Loading…
1,393 results • Best match
CA NO.CWE BLY/GE (W)/46 OF 2026- 2027SPECIAL REPAIR TO BITUMINOUS ROADS AND ROAD FURNITURE AT BUNGALOW NO P-112 AND CERTAIN LOCATION UNDER GE (WEST) BAREILLY
S&F for two way reflective Solar road studs (100% water proofing design according to IP-65) of dimensions 125mm x 125mm x 25mm (shank 65 mm) of high efficiency mono-crystalline solar panel 2.4V/0.30 Watt, one Ni-Mh of Ni-cd rechargeable battery (1.2V /1600MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela) , view distance upto 1000 meters, flash rate 2 Hz and bearable weight of solar studs (10 Tone approx) with impact resistance aluminium alloy body with yellow/ red/ white/ green reflective panels and fixing the same on road surface by applying approximately 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed with 12mm dia and 120mm long zinc plated steel nail at the centre of cats eye complete all as specified and directed.
4217 C.O on U.D Providing Bump and relevant Road Furniture works on Metro Route Junction in SD26 Jurisdiction (Ch-0 to Mahatma Mandir Metro Station)(relevant Road Furniture work on Metro Route)
Supplying of solar road stud (Solar k tie) construction aluminium alloy steel 100 dc water proof design conform to IP67 Dimension 140 mm x 128mm x 82mm + 1mm height of shank + 54mm +0.5 mm diameter of shank 42.5 mm + 0.5 mm plastic unbreakable, scratch, resistant poly carbonate for maintenance free operation solar panel high efficiency mono crystalline 3v/50 mAh Battery XTSRS.01. XTSRS.02. Super capacitor 2.7 v/22 of Six super bright LED with 18000 mod view distance up to 800 meters flash rate 1H2 according to customers requirement resist compression can take the load of 25 tons vehicle color red and yellow working time 80 to 100 hours continuously after the battery is fully charged and complete fixing will be drilling holes on the road for the shank to go inside with out nails and using epoxy resin based adhesive per manufactures recommendation and complete as directed by the Engineer In-Charge.
Balance work of Choral and Narkheri Dam under DRIP-II.
Solar Power Plant On-grid 6 KWp Including All SITC at Choral and Nakheri Tank, including all lead & lifts and as per specifications of MP WRD / MPPWD/ PMGSY and as directed by Engineer-in-Charge"
SPECIAL REPAIRS TO ROAD AND FOOTPATH ALONGWITH STREET LIGHT AT DRDO RESIDENTIAL COMPLEX (KWC AREA) AT TIMARPUR, DELHI
Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.
IRQP Work of Garhwa Shahpur Road From Chainage- 13.00 km to 30.44 km (Total Length-17.44 km) for the year 2026-27
Solar Powered Road Marker (Solar Stud) Supplying of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode.The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280.The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinkikng in 1 Hz.There should be current losses of less than 20 microamperes at 2.4 V in sleepcharging mode to enhace the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10mmx100mmx100 mm. Also, the surface diameter of the marker shall not be less than 100 mm respectively.The weight of the marker shall not exceed 0.5 Kilograms.Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer.)
Construction of Market Shed With Toilet, Deep Boring, PCC Road And Solar Light In The Campus Of Agriculture Market, Gondii Pakhar, Angara Ranchi
Supplying & Fixing AMRUT ENERGY PRIVATE LIMITED--AMRUT ENERGY PRIVATE LIMITED Model III Lithium Ferro phosphate battery (for Model III & IV) 12 V, 20 Ah for Model II AMRUT ENERGY PRIVATE LIMITEDUR Unregistered Brand Manufactured by: AMRUT ENERGY PRIVATE LIMITED (24 WATTS STREET LIGHT), Product id: 5116877-23259286031, Model of Solar Street Lighting System Model III Power Output of PV Module 40 Wp (for Model III) Type of Battery Lithium Ferro phosphate battery (for Model III & IV) Battery Capacity 12 V, 20 Ah for Model II LED Rating White LED, 7 W (Max.) Height of Pole 5 meters above the ground level for Model III & IV, GENERIC Description of Stores Solar street lighting system (SLS) is an outdoor lighting unit used for illuminating a street or an open area Conformity of the Specification As per MNRE specifications attached Attached specification has been seen and understood Yes Solar Street Lighting System Consists of SPV Module, Luminaire, Storage batteryStorage battery, Control electronics, Inter-connecting wires/cables, Module mounting pole including hardware and battery box Model of Solar Street Lighting System Model III PV MODULE Power Output of PV Module 40 Wp (for Model III) Type of PV Module Crystalline silicon solar cells BIS CRS Compliance for PV Module as per IEC 61215 Edition II / BIS 14286 from NABL or IECQ accredited Laboratory BATTERY Type of Battery Lithium Ferro phosphate battery (for Model III & IV) Battery Capacity 12 V, 20 Ah for Model II Battery Conforming to BIS standard / International Standards LIGHT SOURCE LED Rating White LED, 7 W (Max.) Minimum Light Output 16 LUX Colour Temperature (in K) 5500 to 6500 Lamps Housed in an Assembly Suitable for Outdoor, Water proof , IP65 ELECTRONICS Indicators Green for charging is taking place and Red for Load cut off condition Availability of No Load Protection Yes Availability of Battery Overcharge and Deep Discharge Protection Yes Provision of Short Circuit Protection Yes. Provided with Fuse Availability of Reverse Flow of Current Protection through PV Modules Yes Availability of Battery Reverse Polarity Protection Yes Load Reconnect at 80% of the battery capacity status MECHANICAL COMPONENTS Material of Pole G.I. Pipes Height of Pole 5 meters above the ground level for Model III & IV Provision to hold the luminaire on pole Yes Material of Battery Box for Housing the Battery Acid proof and corrosion resistant Metallic box with locking arrangement CERTIFICATIONS Warranty for Street Lighting System (including the battery) (in Years) 5 Minimum Warranty For PV Modules (in Years) 25 Warranty Card Provided Yes Provision of Operation and Maintenance Manual Yes. Provided as per MNRE Specn., Agree to Furnish Name and Address of the Contact Person for Repair and Maintenance in case of non-functionality of the Solar Street Lighting System Yes. Agreed. All Other Technical Requirements as per MNRE specification Agreed to Furnish LM-80 Report For LEDs used in the Lighting System Yes Availability of test reports from Central Govt Lab/NABL accrediated lab/ILAC accrediated lab to prove conformity of the specification Central Govt. Lab Test report number and date if claimbed "Yes" If No write NA NA Name and addres of lab (If No test reports write NA) NA Agreed to furnish all test reports and certificates to buyer on demand Yes