Solar & Renewable Energy Tenders

Supply and fix in replacement of heating element 2/3 KW of solar water heater complete all as specified and as directed.

e 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. (DSR No. 9.141)Öæ
Providing and fixing 4mm thick glass panes with putty and nails with EPDM rubber / neoprene gasket etc. wherever required complete in all respect to the entire satisfaction of EIC of reputed make s.a Modi float/saint gobain (NSI) àï
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (DSR No. 9.97.3)ßç
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (DSR No. 9.100.1)Öõ
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (DSR No. 9.96.1)å

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper (DSR No. 9.101.2)÷

Providing and fixing grabe rail of stainless steel pipe 1.25" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge. (NSI)
Ú
Providing and fixing grabe rail of stainless steel pipe 2" and fitting of grade AISI 304 as per JIS standard 3448 including cutting , welding and fixing in cement concrete as per direction of Engineer-in-charge. (NSI)Õx

Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:required complete in all respects as perentire satisfaction of EIC: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (DSR No. 17.7.4)h
–
Providing and fixing of Jaguar Make Prismatic pillar cock for under counter wash basin complete in all respects as perentire satisfaction of EIC (NSI)‘M
Providing and fixing C.P. Brass angular stop cock of 15 mm nominal bore (NSI)H

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm including cutting and making good the walls and floors wherever required complete in all respects as perentire satisfaction of EIC: Single half stall urinal (NSI based on DSR 17.5.1)ûÍ
Providing and fixing of Jaguar Make autoclosing Urinal angle valve for half stall urinal including the cost of CP connection & spreader etc. complete in all respects as perentire satisfaction of EIC (NSI)ÈÇ
providing anf fixing 8 mm dia C.P /S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C of quality and make as approved by Engineer-in-charge (DSR No. 17.16A)·Ú
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No. 17.31)Ëì

Providing and fixing urinal partition 10mm thick High Stainless Steel of approved make and superior quality of size 1.5 x 2.75 fixed in postion with clams holding the Steel Partition All exposed edges to be grinded with smooth finish to the entire satification of engineer-in-charge including carriage of material to site of work. to the entire satification of engineer-in-charge including carriage of material to site of work. [ Fixed on slopping back wall before fixing ceramic tiles] (NSI)ç

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR No. 17.22A)t
Providing and Fixing C.P. brass bib cock of approved quality conforming IS:8931: 15mm nominal bore (DSR No. 18.49.1)c—
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (DSR No. 18.53A)‡â

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No. 17.1.1)Ò
À

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR No. 17.2.1)°

Providing and fixing to the inlet mouth of rain water pipe cast iron gratting 15cm diameter and weighing not less then 440 gram. (DSR No. 12.44)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank: (DSR No. 18.48)
¾
Providing and fixing water meter cover made out of MS angle frame 25mmx25mmxshutter 20mmx20mmx5mm MS sheet 18 gauge with locking arrangement primer & painting complete in all respects. (NSI)¹

Providing and installation of superior quality heavy duty ISI marked sanitary napkin vending machines and Incinerators with Sanitary Napkin pad (1 Box = 200 Pads ). The cost include basic cost of equipment, taxes, delivery charges, training charges & warranty of 12 months. (NSI)
~
Providing and fixing unplasticised PVC connection pipe with barss union : 30 cm length: 15 mm nominal bore (DSR No. 18.21.1.1)k4
45 cm length: 15 mm nominal bore (DSR No. 18.21.2.1)!r
Providing and fixing uplasticised PVC connection pipe with brass unions : 61 cm length : 15 mm nominal bore: (NSI)m(
122 cm length: 15 mm nominal bore (NSI)#ü
Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(DSR No. 17.71)í:

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (DSR No. 17.73)+


Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter (DSR No. 12.41.2)ú3

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Bend 87.5° : 110 mm bend (DSR No. 12.42.5.2)
_
Supplying & placing Garbage large dust bin (Plastic ) 48 liter Make: Diplast/Aristo/Ceilo (NSI)ZV
Supplying and placing Plastic Mug (1.5 litre) Make: Playset/Milton/Ceilo/Nayasa. (NSI)Qy
Providing & fixing CP - Soap Holder size (138x102x75mm) complete in all respects to the entire satisfaction of EIC. (NSI)tG
Providing and Fixing Toilet paper holder: C.P. Brass (DSR No. 17.34.1)6¢
Providing and fixing acralic sheet with silver remark engraving plate 12"x18" in postion at required place to the entire satification of Engineer-in-charge. (NSI)Í
Providing and fixing Sun board printing with lamination on 5mm sun board of size 6' x 2' to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge (NSI)È¢
Providing and fixing acralic sheet with silver remark engraving plate 12"x12" in postion at required place to the entire satification of Engineer-in-charge. (NSI)Ï
Providing and fixing Sun board printing with lamination on 5mm sun board of size 24" x 30" to be fixed at the height of 12' from NGL, leveled in postion to the entire satification of Engineer-in-charge (NSI)Êk
Providing and fixing a disabled person toilet alarm kit (comprising an over-the-door/wall light and sounder, one toilet reset switch, ceiling/wall pull unit with pull cord, and disabled WC sticker). The system operates by simply pulling the cord to activate the sound alarm and over-door light outside the toilet (pull cord length more than 275 cm). The alarm system should consist of a red pull cord with red bangles of 50 mm diameter, with one bangles at a height between 800 mm and 1000 mm, and the other at 100 mm above floor level. Complete set in all respects, as per the direction of the Engineer-in-charge (NSI)f—
Providing and fixing of murals with the given specifications:- Base: 12mm thickness bison panel board (NCL Group Brand), Board and Mural Size: 8' x 4'. Primer:- Exterior Apex Base Primer (2 coats) on board both sides, Paints:- Apex exterior whether proof acrylic paints (2 coats).Applied in various colors as per approved graphics and design on front side and back side of board painted with plain duco paint, Frame:- Aluminium corner 1" x 1.5" thickness fixed around the edges. Fixing/transporation:- A. Fixing provisions (10mm holes) to be given at backside of boards for fasteners to be fixed on walls. B. Onsite fixing with 10mm 4" fastners on the wall. (NSI)’Å
Designing, providing and fixing of aluminium composite glowing sign board of clear size 5'x1-3' after moulding 3" both side made out of size 5'x1'-9" sheet having thickness of 3mm, CNC Router Cut Letter Acrylic sheet 2.8mm with CNC laser cut, MS SQ pipe 42mm i/d having 1mm thick, 3mm thick sun board box for housing glowing LEDs module, backside board covered with 2mm ACP sheet, LED Module and water proof power supplies, installation at specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall i/c cost of anchor bolts and electrical wiring with making connection with switch boards at site including loading, unloading, carriage & labour charges complete in all respects. (NSI)À·
Designing, providing and fixing of aluminium composite glowing sign board of clear size ^'-1'-6" after moulding 3" both side made out of size 6'x2" thickness of 3mm, CNC Router Cut Letter Acrylic sheet 2.8mm with CNC laser cut, MS SQ pipe 42mm i/d having 1mm thick, 3mm thick sun board box for housing glowing LEDs moldule, backside board covered with 2mm ACP sheet, LED Module and water proof power supplies, installation at specific height by fixing with 2 No. L-type brackets and 2 No. flat brackets on wall i/c cost of anchor bolts and electrical wiring with making connection with switch board at site including loading, unloading, carriage & labour charges complete in all respects. (NSI)²¦
Providing and fixing of Exhaust fan Make: crompton/Havells complete in all respects including the cost of wiring and switches etc. Size 12" double ball bearing. (NSI)¡Z
Providing and fixing the louvers complete with frame for exhaust fan of 12" diameter (NSI)Ub
Providing and fixing of ceiling fan of size 48" Make : Crompton/Havells/Orient/Usha/Khaitan. (NSI)]Z
P/F of LED Tubelights complete set type 18W ,L=4ft, Make : Crompton/Havells /philips (NSI)Ut
P/F of 1.5mm single core PVC insulated copper cable for wiring at Toilet BlockMake : finolex /ploycab, Havells (NSI)oz
P/F of 0.75 mm single core PVC insulated copper cable for earthing at Toilet Block,Make : Havells/ Finolex/ Polycab. (NSI)uÝ
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Elec DSR No. 1.21)ʼ
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required Make: Havells/ Anchor/ SSK/ Gold Medal (Elec DSR No. 1.23)©u
Providing and fixing of 5Amp modular swiches with electricial connection Make:-Anchor/ havells/ Goldmedal/ SSK. (NSI)p{
Providing and fixing of 3 pin 5Amp modular Sockets with electricial connection Make:-Anchor/ havells/ Goldmedal/ SSK. (NSI)v¸
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required: 8 Module (125mmX125mm) (Elec DSR No. 1.27.5 E)¡Ñ
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (Elec DSR No. 1.22 E)¼5
100 mm X 100 mm X 60 mm deep (Elec DSR No. 1.22.2 E)4
150 mm X 150 mm X 60 mm deep (Elec DSR No. 1.22.4 E)4
200 mm X 125 mm X 60 mm deep (Elec DSR No. 1.22.6 E)k

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. as required : 110 mm ( DSR No. 12.43.2)Y
t

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular swith, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required: Group B (Elec DSR No. 1.10.2)_


Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Elec DSR No. 1.12)þ

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA,  C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Elec DSR No. 2.10)÷"
single Pole (Elec DSR No. 2.10.1) "
Double Pole (Elec DSR No. 2.10.3) W
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door (Elec DSR No. 2.3.3) B
V
÷
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required. (Elec DSR No. 5.1)åª

Supplying and fixing following way, single pole and netural, sheet steel, MCB distribution board consurmer unit 240 volts, on surface/reess, complete with timed copper bus bar netural bus bar, earth bus bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthling etc. as required (But without MC/ PCCB/Isolator) 2*4 way (Elec DSR No. 2.7.4)–
ø
Making suitable size wall niche inimum 2'x3'-0'' including cement plastering from inside of niche, wooden plank for sheet metal, iron clad switch gear includng the cost of PVC shutter with locking arrangement, Chowkat complete in all respects (NSI)óŽ
Providing and fixing 50 watt LED flood light with bracket out side on the wall complete in all respects. Make: Crompton/Havells/Phillips (NSI)‰X
Providing and fixing of wall hang Hand Drier heavy duty ISI marked of reputed make (NSI)S‹
Providing and fixing of wall hang tissue paper dispensers of superior quality/approved make in washbasin area as per direction of EIC (NSI)†k
Providing and fixing of aluminum cable10 mm 2 core of make Shalimar /havells complete in all respects.(NSI)f

Providing and Fixing of Customer feedback device of superior quality/approved make having 3 nos. push buttons , metal body,wall mounted,mahine use for givng rating on public toilet including terminal box, electrical parts,wiring complete in all respects.(NSI)þ:

Providing and fixing of invertor 875 VA/700 Watt, input and output voltage 220 VAC, 50 Hz, 1 Phase, Battery 150 AH capacity of Make: Exide/ Luminious/ Amaron/Microtek solar panel including cost of wiring, transportation charges and installation charges and installation charges etc. complete in all respects. (NSI)5
.
Providing and placing PVC mat 15mm thick (NSI))g
Providing and placing PVC POT (Gamla) Size 18",12" dia Green in colour including decoretive plant.(NSI)b*
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) excluding C.I. cover with frame (light duty) 455x610 mm internal dimensions, , R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.30.3.1)w

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No. 12.22)h
é
35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm ofcross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge: Decorative finish (wood grained finish) (DSR No. 9.142.2)Ø‘Note: The old material s.a. PVC tank etc. recovered from site for which credit has not been considered above shall be returned to the department.B
PVC pipes (working pressure 6 kg / cm²) Single socketed pipe (NSI)=
75 mm dia. (NSI) 
110 mm dia (NSI) Credit for door/ window

Providing and fixing of invertor 875 VA/700 Watt, input and output voltage 220 VAC, 50 Hz, 1 Phase, Battery 150 AH capacity of Make: Exide/ Luminious/ Amaron/Microtek solar panel including cost of wiring, transportation charges and installation charges and installation charges etc. complete in all respects.(NSI)

Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4) 3.2Volt (Cell) 30 AH battery, charging time 8- 10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage: 12V DC , Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-08, CRI >80 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K /6000°K (As per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitry) of 50K hours lamp burring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic switch on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output All as per pre approved by Engineer in-charge complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required.(Part 1), for fixtures up to 60 watt. LED light Complete with mounting structure for the battery and accessories and wind storm withstand capacity as per the zone. (Thermal management: heat sink of aluminium housing such that LED junction temperature do'nt rise aboven 90°C) 30 Watt (System lumen efficacy >120 lm/Watt)