Solar & Renewable Energy Tenders

COCO, Standard drawing No. ENG/IOCL/PDIL-1. List of Componets are: (a) 1 No. MCCB (3P+N) of 160 A, 35 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-150A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 160 A, Manually Operated Change over switch suitable for connection of Mains supply and 75 KVA DG Set /10 KW Solar system with required No. of MCCB (160 A, 35 KA, 3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 160A, 35 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/ Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 160/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 160 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4. (l) 12 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA & 6 Nos DP MCB 20 A, 10KA in outgoing Feeder-2 (n) 3 Nos DP MCB of 16 A, 10 KA,6 Nos DP MCB of 20A, 10 KA & 3 Nos DP MCB of 25 A, 10 KA in outgoing Feeder-3 (o) 3 Nos TP MCB of 16 A, 10 KA,3 Nos TP MCB of 20A, 10 KA & 6 Nos TP MCB of 25 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL.

Providing and Fixing of bidirectional Solar Road Stud of self illummation made of multi crystalline silicon solar panel flashing hype having 4 nos ultra bright LED'S of red made of metallic body , ultra LED's red/yellow/blue/green/white coloured. It shall have flashing rate of 2HZ or 5HZ and 2 rechargeable NI-CD or Ni-MH battery which give backup of at least five days from fully charges condition aluminum die cost housing having reflector stip in addition to LED's. The stud is capable of withstanding the load if 12n tons having tampering both m anchor of minimum 50mm length It is water proof and capable of withstanding temperature betweets 25 degree C and 55 C Fixing will be by drilling holes on the road for the twin moulded shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendationFixing will be by drilling holes on the road for the twin moulded shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendationcomplete in all respect to the entire satisfaction of the engineer in charge. Conditions: The Solar stud should carry test certificate for the compressive strength from reputed and independent NABL accredited laboratory.

Combustor of the Boiler. It also commissioned 05 MW solar power station at SLPP in