Loading
Loading…
Loading…
1,432 results • Best match
REPAIR MAINT OF INTERNAL ELELCTRIFICATION AT DOMESTIC AREA AT MANKHURD AND SECURITY LIGHTS, CABLES, POST TOP LANTERN GARDEN LIGHTS AT TECHNICAL AREA UNDER GE (NW) MANKHURD.
M&L for preparation of old painted surfaces of Solar Street Light Poles including acessories by scarping old paint and applying two coats of paint including numbering of pole with black oil paint all as directed by Engineer in Charge
Air cooler
Tooliom True Color Welding Helmet Auto Darkening Welding Mask with Shade Range 9-13 Solar Powered
Upgradation of
10 KVA Solar Powered Backup System
NIT No. 64/EE(R-III)/ 2025-26
Supplying and installation of Solar Raised Pavement markers with the latest IRC : 35 standards made out of high impact- resistant polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20,000 kg tested in accordance to ASTM D 4280. The marker should be efficient weather resistant and capable of providing a long operational life according to IP 67 standards and should withstand temperatures in the range of 0 C to 70 C. Typical frequency of blinking is 1 Hz. The solar RPM must be equiped with a chargeable battery with a minimmum operational life of 3 years. The battery should be capable of providing illumination for a minimum of 72 hours without sunlight. The high Width and length shall not be less than 10mm x 100mm x 100mm. Also the surface diameter of the marker shall not be less than 100mm respectively the weight of the marker shall not excced 0.50 Killograms. Fixing will be done by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer-in-charge. The solar raised pavement markers shall be tested for Compression strength of 20000 Kg, IP 67 rating, Blinking frequency from government lab (CRRI/ARAI/ICAT/CPRI) as per requirement of MoRTH and Test Report shall be submitted with Supply of material. The RPM must have high intensity LEDs with a minimum life of 1,00,000 hours. The LEDs should be visible from a distance of atleast 500 metres
IMPROVEMENT WITH WIDENING TO JALKA CHIKNI DONGARGAON TEMBURDA BHATALA KHEMJAI SHEGAON ROAD MDR-5 IN KM 17/500 TO 33/500 (INCLUDING LENGTH OF MDR-4 KM.30/00 TO 33/500) IN TQ. WARORA DIST. CHANDRAPUR (2ND CALL)
Planting large flowering/Shady trees or required variety of Foliage Trees (free from weeds /diesease etc.) 30 cms. apart (Ht. >2mtr.) :- Digging pits with size 1.0m x 1.0m x 1.0m, removing and conveying unwanted stuff to a required distance as directed. Filling with fresh garden soil & manure in 3:1 proportion to a required height of 30cms Mixing garden soil & manure thoroughly well, levelling, watering, on previous night, Planting seedling of reqiured annuals 25cms. apart Maintaining till well established by watering weeding, Stirring replacing of casualties etc. Complete.
Supply and Fixing of 4X18 watt 10 No. Solar High Mast light in vidhansabha kerakat Lok sabha Machhlishar,distt-Jaunpur
Supply of Solar street lighting System with 4x18watt l.e.d.(W-LED Based), 4x110 Wp 12 V Solar Module , Battery 4x12.8v 50 AH, Li-Fe-PO4 Battery) MNRE APPROVED.with 05 years warrenty