Loading
Loading…
Loading…
1,432 results • Best match
High Mast Shifting and Providing Street Light to Sri Jwalamukki Tripura Sundari amma Temple, Uthanahalli Village and Chamundi hill
Supplying and fixing of solar lux level street light control switch single phase including suitable capacity contactor - 3 KW (PWD Ele 2023-24, P.No.21, I.No.5.49.1, V-6)
REPAIR REPLACEMENT OF INTERNAL UNSERVICEABLE POINT WIRING FITTING FIXTURE AND CONNECTED ACCESSORIES WORK IN TARAPORE ENCLAVE, KHETRAPAL ENCLAVE AND ABDUL HAMID UNDER AGE EM IV OF GE(S) BATHINDA AT BATHINDA MIL STN
S&F in replacement thermostat ISI marked stem type 240 Volts, AC supply temp range at least 30 to 75 degree C for geyser/solar water heater system complete all as specified and directed by Engineer-in-Charge.
REPAIR/ REPLACEMENT OF EARTHING , LT PANEL , MCCBs, BUS BAR, CHANGEOVER, PAINTING OF POLE AND OTHER E/M MISC WORK AT BB CANTT, SRINAGAR
Supply & fix in repair of heat collector glass size 80"X40" suitable for solar water heater of capacity 500/1000 LPD as per existing type and sizes, complete all as specified and directed
Refer to BOQ
Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 20 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4),charging time 6-8 hours, Battery backup time 12 hours (minimum), LED fixture 20 watt, Input voltage: 12V DC, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%, IP-66,IK-08, CRI >70 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K / (As per American National Standard Institute (ANSI Bin)), life time (LED,Driver & electrical circuitry) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. All as per pre approved by Engineer in-charge complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm speed as per the site location. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
Development of all major roads (strengthening, widening, beautification and horticulture work) from PWD rest house to old bus stand including all cross roads form NDRI boundary wall to railway road.(Recall)
[34.36]Solar RPM/ Stud Providing and installation of solar cat eye produced from an engineered polymer selected for superior impact resistance and weather-ability. The top of the solar stud should be transparent for solar charging and light output in active mode. The base of the body shall be yellow or neutral white as approved by Engineer In-charge. The marker shall incorporate a solar panel (comprising of solar cells) for converting solar energy into electricity, a storage device for storing the energy, LEDs for illumination and a design for providing 360 degree smooth illumination. The Solar stud shall be round in shape for providing illumination in all directions. The solar stud shall also have high reflective polycarbonate/ methyl methecrylate lenses for conspicuity in passive mode and dual shanks for improved road presence. The solar studs are intended for application directly onto pavement surfaces and shall be applied with epoxy resin adhesives designed for use with raised pavement markers and as supplied by the marker manufacturer separately. The solar cat eye shall be of height: 65 ± 2 mm & Maximum Diameter: 136 ± 5 mm. The body of the solar cat eye shall be resistant to dust and water ingress as per IP 65 standards. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. [Through Rate]
Carrying out Zone works for period ending 30.06.2027 on Zone No-6 Mech. Workshop including workshop administrative building and store depot Izzatnagar.
Supplying & installation of wind driven turbine Each ventilator with FRM base to match profile of aluminum galvanized corrugated (GC) roofing sheets of SVS make or similar of throat/elbow diameter 24'' to be fixed on the roof of the sheds. Installation shall be done in such manner that the roof remains watertight and leak proof.