Solar Street Lights Tenders

Area lightings Supply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .Make:Crompton/Panasonic/Havells/Phillips 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab

(s) Supply and fixing 20 No, Hybrid type Stand alone solar Street Light 40W made with high efficiency Mono light crystalline solar PV module, Lithium Ferro Phosphate battery with inbuilt BMS technology, High efficiency LED, MPPT solar charge controller and aluminium extruded body specially programmed to automatically control the dimming and brightness of light, which increase the backup time all as specified and directed and also shall comprise the followings: - (i) S&F 3.5 m high mild steel powder coated pole of suitable dia compatible with solar light fitting and fixturesalong with gussets plate and nut bolts and washers etc. (ii)Necessary earthwork, PCC foundation & filling etc. (Contd.../)

Supply and fixing LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. Make : wipro,Havells,Oriental complete all as specified and directed by Engineer- in-charge.

69 S&F Solar All in One system 40 W Smart Integrated Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) 12.8V 24Ah Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K Suitable LED efficacy to have system efficacy of not less than 125 Lumen/Watt and Life of LED light fitting Not less than 50000 burning hours including fixing accessories like clamps of suitable size at existing pole and dismantling out old unsv ones complete all as specified and as directed. Note:1.Contractor have to submit LM 79 and LM 80 report from NABL accredited Lab,Test Certificate and other relevant documents as directed by Engr-inCharge before approval of product. 2. Contractor will undertaking about warranty certificate of 50000 hr burning life. 3. Cost of taking down old unsv fittings is deemed to be included in unit quoted rates. 10 Each Excess(+) Full Conversion INR

Supply of 50 W AIO Solar street lights having 150 Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be > 9000 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 180 lm/w ) as per LM 79 report of NABL Lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products . 1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 (Report of NABL lab only )