Solar Street Lights Tender Results

Module 75-100 W Solar panel (ERTL & Flash tested), the module shall contain cryst alline siliconsolar cell and must have a testing confirming to IEC 61215 edition II certified, with building Blocking Diode with 10 years warranty, shall have device life more than 25 years limited power less not more than 10% of nominal output at the end of 10 years and not more than 20% at the end of 25years. The solar module shall be able to withstand the temp extremes ranging from - 10*C to + 85*C and the wind speed @120Km/hr.Maximum mean hour rain fall of 40mm. himidity level upto 90% MNRE approved gerade solar panel. Cell materials- Poly cristal silicon solar cell. Capacity - The power output of the module (s) should not less than 60 wattpeak.the operating voltage corrosponding to the power output mention above should be 16.5v. The Ocv of the PV module under STC should be atleast 21v.calculation under avarage daily isolation of 5.5Whr/sq.mt, on a horizontal surface. ( Make- Green/Exide/SRI SAVIITR/ MNRE approved) or EQ

Solar Module: Supply, transport, installation and commissioning of Wp ISI marked solar module as per following specification. 1. Cell: Indigenous mono crystalline silicon SPV cells. 2. Solar Module: Monocrystalline technology/module with bifacial cell 3. Standards: ISI marked as per IS 14286 and having certification of IEC 6183(1), 61730(1&2), 61710 4. Modules must quality to IS 170210(Part 1) 5. Min efficiency 19.5% 6. Fill factor: More than 75% 7. Module wattage mismatch in the SPV array: within +3% 8. Wattage output warranty: Should be less than 90% at the end of 10 years and 80% at the end of 25 years. 9. Power output of individual PV modules used in the PV array, under STC minimum 300Wp. Necessary test certificate also to be supplied. For detail information please see cl. No 2.1 of technical specification.