AIC/AED/NIeT-564/25-26/Gr_6

Erection of Minipole of height 3.25 mtr to 5.0 mtr. in C.C Foundation 0.46 m - 0.46 m 0.9 mtr depth of 1:3:6 cement concrete with hard jhama metal/stone chips including muffing of 0.3 m 0.3 m 0.3 m painting the pole with 2 coats of Aluminium paint over a coat red oxide.

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying of Swaged Steel Tubular pole (IS 2713, Pt. II 1980) for following designation and of following dimensions 4 SWG ;6.0 mtrs; 54 Kg

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1.5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

Earthing with 50mm dia Galvanised iron pipe 3.64mm thick x3mts long and 1x4SWG GI wire (1Mts long) 13mmx80mm dia GI bolts, double nuts, double washers incl. S&F 15mm dia Gl pipe protection as to GS. By TATA Medium GI pipe for soft soil.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make. and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole

1st coat of synthetic enamel paint over the primor

2nd coat of synthetic enamel paint over the 1st coat

Solar Module: Supply, transport, installation and commissioning of Wp ISI marked solar module as per following specification. 1. Cell: Indigenous mono crystalline silicon SPV cells. 2. Solar Module: Monocrystalline technology/module with bifacial cell 3. Standards: ISI marked as per IS 14286 and having certification of IEC 6183(1), 61730(1&2), 61710 4. Modules must quality to IS 170210(Part 1) 5. Min efficiency 19.5% 6. Fill factor: More than 75% 7. Module wattage mismatch in the SPV array: within +3% 8. Wattage output warranty: Should be less than 90% at the end of 10 years and 80% at the end of 25 years. 9. Power output of individual PV modules used in the PV array, under STC minimum 300Wp. Necessary test certificate also to be supplied. For detail information please see cl. No 2.1 of technical specification.

Supply and Fixing 18W Stand Along LED Semi Integrated Solar Streetlight with arm suitble for 50-65mm dia pole BatteryMinimum 12.8V, 42 AH capacity Lithium Ferro Phosphate battery should Conform to the latest BIS/ International Standard. The colour temperature of white LED used in systmen should be in the range of 5500K-6500K. Specification as per MNRE approved.

Sub Total

Please Enable Macros to View BoQ information