Loading
Loading…
Loading…
3,422 results • Best match
LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS Scheme - II) (Q2), LED Batten Light (LED Tube Light) (V2) (Q2) (3 (3 ))
LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS Scheme - II) (Q2)
Supply and delivery of 70watt and 120 watt led street lights, clamps and brackets for the maintenance of street lighting in kakinada municipal corporation.
12 Watt White-LED Based Solar Street Lighting System As Per MNRE Specification (Q3), GI POLE 5 MTR, 45WATT INVERTER STREET LIGHT, 90 WATT INVERTER STREET LIGHT, GI SOCKET 25MM, GI SOCKET 40 MM, GI SOCKET 50 MM, GI ELBOW 40 MM
45WATT INVERTER STREET LIGHT
LED Luminaire for High Bay Lighting (Q3), Lighting Pole or Post and Hardware - Tubular Street Light Poles (V2) (Q3) (3 (3 ))
Lighting Pole or Post and Hardware - Tubular Street Light Poles (V2) (Q3) (3 (3 ))
Supply of LED Street lights of various wattage, CC MS Boxes and Street lighting material, in uncovered areas of Yelamanchili Municipality under 15th FC Un-Tied Grant 1st Installment.
Supply and transportation of 20 Watts LED Street light Luminaire made of pressure diecast aluminum body with powder coated, having protective toughened glass, supply input voltage 120 - 270V AC, P.F > 0.90, high power LEDs having System Efficacy > 100 lumens/watt and junction temperature 70°C, with Ingress protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), driver surge protection 4KV, in-house additional Surge protection 10 KV with optics distribution, THD90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: Makes: V-Guard/Bonton / HPL /Sudhakar/Orbit/ Tamra/ /Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal /DEC /Unistar/LS cable20 Watts
Replacement of old HPSV type street light fittings and MH type flood lights to LED light fittings at the compound of West Bengal Board for Technicians Studio.
Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body finish with corrosion resistance fasteners (SS hardware) & silicon gasket for proper sealing with driver as per the requirement with Driver efficiency >80%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range 0o to 50o C and working RH 10% - 90%, internal surge protection of 5 KV internal and external SPD min. 10 KV, L,N,E as per IEC 61000-4-5. The driver rated output wattage should be 10% to 15% higher than lamp rating and at least 2 driver for 200W & above and Driver efficiency >85%, THD 10% as per IEC 61000-3-2 , P. F.≥0.9, IP- 66, IK-08 specified below, CRI >70, under voltage and over voltage protection, high efficiency lens with type II/III distribution as required with UV stabilized optical lens, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours (Life projection shall be calculated as per TM-21 methodology) and 70% of initial Lumen maintained till life ends. CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect and LED Chips of SMD mid to high-power (2.5 to 4 watt for 200 watt and above, as per required (LM- 80 tested) and necessary inter-connections with 1.5 sq mm FR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM comprehensive on-site warranty against manufacturing defects including driver and LED module. All test report except L80 should be from 3rd party NABL accredited Lab as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (System lumen efficacy ≥135 lm/Watt) (Make: Signify / Crompton / Wipro)