Street Lighting Tenders

Supplying & erecting street light control panel in powder coated (RAL 7035), IP 65 GI CRCA 12/14 SWG sheet,, outdoor type, with Mortise lock Arrangement, Panels lock etc. with three phase, 415 V consisted of suitable rating contactor, 24 hrs. digital / astronomical time switch with minimum 5 years battery backup,1 No FP MCB 100 A as Incomer for streetlight section , 63 Amp FPMCB ,6 NO of 40A Power Contactor ,40 KA SPD Type 2 ,40 Amp SPMCB 16 No outgoing feeder auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation & over current, short circuit, earth fault protection of street lights up to the max load of 25 KW with necessary arrangement of fixing MSEDCL meter with 250 A FPTM Based 36KA MCCB as incomer , 1 No 200 Amp FPTM Based 25KA MCCB as sub feeder outgoing including mounting on iron frame / CC foundation complete. Two compartments with separate door for each & having Godrej / Europa make computer key mortise lock etc., all required wiring for distribution in FP 16 Sq.mm & 25 sq.mm multi strand copper wire used & for control wirings 2.5 sq.mm multi strand copper wire, Copper bus bar used for circuit distribution, 5 A / 15A combined switch socket & 10 watt LED tube set for Illumination in Feeder with limit switch for door used with required hardware and allied accessories as per schematic drawing & Bill of material enclosed

Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )

S&F 1100 volt grade heavy duty cable PVC insulated round sheathed multistranded copper conductor three core of size 2.5 sqmm for connection of street light fitting from junction box to street light fitting complete all as specified and as directed.

194 Supplying and erecting LED street light fittings with High power White LEDs wattage of 3 Watt and above Ea. 25.00 5,917.00

Supply, fixing and testing as in repair LED Street / Security light fitting of 35 Watt, 5700K - 6500 K (including LED drive and internally prewired) complete with body robust, corrosion resistant, superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminum alloy. The luminaries shall be monolithic construction totally enclosed dust and water proof with IP -65 / 66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 300 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distortion THD(I) less than 15% ,cool white colour and lamp starting time should not be more than 10 second including 10 KV surge protection in built or external. Driver should be constant current constant voltage driver. Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degree Centigrade to 50 degree Centigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 100 lumens per watt and must be certified by the LM-79 test report and including connection for street light from pole box with 1.5 Sqmm, 3 core PVC insulated stranded copper conductor FRLSH cable, 1100 Volts grade ISI marked including addition / alteration in bracket (if required) for fixing light fitting complete all as specified and directed by Engineer-in- charge..Make :Havells Cat Part No LHETAVU7PA7J030/ Crompton Cat No TRP-415-30-57-SL-LM-NBK/Wipro Cat No D912065 or equivalent in Techno commercial makes mentioned in Appendix 'A' here-in-after