Loading
Loading…
Loading…
3,758 results • Best match
SPECIAL REPAIR TO OR LIVING OTM AND JCO S CLUB BUILDING NO P 1223A AND P 1223B AT 521 NETWORK SIG COY AT BB CANTT, SRINAGAR.
Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric, connection all as specified and directed.
CONSTRUCTION OF BIT ACADEMIC BLOCK BANGALORE INSTITUTE OF TECHNOLOGY AT K R ROAD V V PURAM BENGALURU-04
31 LED SOLAR STREET LIGHT HAVELLS, CROMPTON / TERRA SERVE
SPECIAL REPAIR TO BLDG No. NP-08, NP-09, NP-10 AND NP-11 (JCOs MD ACCN) AT JAIDEEP VIHAR AND PROVN OF CONVERSION OF OH POWER CABLE TO UNDERGROUND UNDER GE (W) PATHANKOT
S&F in repair bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length not less than 0.9 mtr fixing with clamp etc and making connections using suitable size copper cable from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
GENERAL-Budget 2025-26- Project to Transform Various Libraries in Kayamkulam LAC - HI-TECH Libraries Electrification Work-General Electrical Work
90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
Part(A):BINA- Construction of New Running Room (G+2) having 60 Rooms with 2 bed each at east side of station. Site Area 3701.76 sqm. Part(B): Itarsi - Construction of New Running Room (G+1) having 30 Rooms with 2 bed each at Old ADEN office, Itarsi (GF & FF area-989.24sqm X 2 =1978.48sqm). Part(C): ET - Capacity Augmentation of New Guard Running Room at Itarsi, 6 Rooms with 2 bed each, kitchen and dining at Itarsi. Part(D): Bhopal - Construction of New Running Room (G+1) having 35 Room with 2 bed each near BPL lobby at BPL (GF and FF 47.72m X 12.55m X 2 = 1197.76 sqm).
LED Street light fitting of IP66, Pressure die-cast aluminium alloy for housing (heat sink) for
Churchgate - Electrical (Power) work in connection with repairs & prevention of leakage in control tower.
Supply, fixing, testing & commissioning of LED street light lumaires 45W maximum, whether proof having IP 65/66 protection, having inbuilt sensor and auto dimming driver. System efficacy greater than or equal to 120 lm/W, Lumen Output greater than or equal to 5400 lumens, 19 Colour consistency CRI greater than or equal to 70. Driver Surge protection greater than or equal to 4KV, The luminaire should have a potted driver, mounted inside the luminaire. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). The sensor should have a coverage area of minimum 8m and detection angle 1800 - 3200 approx., mounting at 5m-7m approx. height from ground level Luminaries complete with all accessories and other specifications as per Annexure XI. (Minimum Warrantee - 5 years)