Loading…
Loading…
3,743 results • Best match
Construction of Control Room Building and Other Civil Works for 33/11 K.V. S/S Achikhurd Distt- Meerut.
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect CAT- AAA. NSI (Ref. UPPWD SOR ELECTRICAL 2018 Item No 1423)
Construction of Control Room Building and Other Civil Works for 33/11 K.V. S/S Kazipur-2 Distt- Meerut.
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect CAT- AAA. NSI (Ref. UPPWD SOR ELECTRICAL 2018 Item No 1423)
Rising Main from Lakes and Rivers to WTP in Puducherry
Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor >0.95 driver Efficiency >85% ,THD(I) 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .48 W LED Street Light fixture
TOURISM DEVELOPMENT WORKS AT SHRI NARAYAN BHAKTI YOGA PARAMHANS MUNIGIRI SEVA DHAM, LOCATED IN FATTUPUR UNDER THE MAHARAJGANJ DEVELOPMENT BLOCK, DISTRICT JAUNPUR
Supply and fixing of LED street light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 60 watt to 72 watt confirming to IP 65/66 protection complete in all respect.MR
CA NO CWE/AMB/NORTH-06 OF 2026-27 SPECIAL REPAIR TO 16 X OR MD ACCN AT JADUNATH SINGH LINES (FAFA) UNDER GE (SOUTH) AMBALA CANTT
Supply & fixing for New generation energy saving and environmental friendly long life LED street light of 35 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with input voltage AC 220V-240V, 50 Hz, with colour tempetrature 6500K and system Lumens not less than 2500 lumens with High efficiency long life LED withSMD LED on MCPCB lumen efficacy not less than 100 lm/W, Powered by Built-in, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open /Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection up to 4KV (Inbuilt) and PF should be not less than 0.95 including making good disturbed surface complete all as specified and as directed.
GE (N) P/TOKEN- 07 OF 2026-2027 SPL REPAIRS OF BLDG NO. 1 (BARRACK FOR SINGLE MEN) IN R/O 101 INF BN (TA) MARATHA LI UNDER GE (NORTH) PUNE
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completecomplete all as per Make JAQUAR, Bajaj, Philips, Havells as approved.