Street Lighting Tenders

SITC of following rating street light luminarie with pressure die cast housing and toughened glass cover (IP66 protection) in existing pole/pipe for supply voltage 100-270V AC ,50Hz.Luminarie shall confirm to IS 10322 part -5/section -3 and shall be complete with all necessary accessories as required 60 W LED Street light

Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR ., LED Street Light fixture with Minimum lumen output 12500 lm

Supply of Decorative Pole of 7-8mtr above the ground level with Single armbracket hold 100W led,10k lumens street lighteach. Pole light is complete in all aspects with all accessories without foundation bolts in all respect with design and drawing as per satisfaction of engineer in charge

Taking down and dismantling of existing pole mounted luminaires of any types (Garden lights,high mast light,Flood lights,Gate lights,Street lights,Decorative lights,Solar lights,post top lanten) including disconnection and cleaning corrosion to all spares (bolts,clamps,brackests) with preventing to rapid rusting treatment.replace a LED drivers for maintaining to IP 66 rating integrity,external surge protection devices for over- voltage protection. and suitable size of LED module board, terminal blocks, flexible wires,UV stabilized covers for specific luminaire models etc complete all as specified and as directed by Engr-in-Charge.

Estimate for supply installation and dismantling of street lights 2nd phase in block Ganaur dist. Sonipat