Loading
Loading…
Loading…
3,639 results • Best match
REPAIR TO STREET LIGHTS, HIGH MAST LIGHTS AND OTHER ALLIED WORKS IN PH-I AND PH-II AREAS UNDER GE NARANGI
Supply and fixing of high-quality LED street Light with a minimum system lumen of 8400 Lm (+/-5%) and system wattage not exceeding 60W (+/- 5%) with a nominal system efficacy of ≥140 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminium, to withstand extreme environments. The name of the brand should be embossed/engraved and should not be mentioned using sticker/screen printing. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be a minimum IP66 and impact resistance shall be IK10. The Luminaire should have a minimum 10KV/10KA SPD duly bolted in the Luminaire. The luminaire should be of Class B Serviceability. The Driver should be asphalt potted and should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load. The driver should be capable to withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The luminaire driver, it’s SPD shall be of the same make/manufacturer as that of LED luminaires complete all as specifed and directed
Supply installation and dismantling( 5 year) of street lights Villages of Block Jagadhari, Radaur Distt Yamunanagar
Labour for installation and dismantling, repair and maintenance of street light at site including all patty material in all respect for 5 years
Maintenance and Operation of street light and High Mast light i/c monitoring of street light, lift and escalators at various locations under PWD M-251 Delhi. (SH- SITC of Street light, cable work at various location under sub division-3/M2533)
LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 4000°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. system lumen efficacy ≥120 135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
street light material supply
20 வாட்ஸ் LED தெருவிளக்கு
MOEI & fans including compound light, DG set, Pump sets of General pool quarters at KB & KC block at Salt Lake, Kolkata during the year 2026-27. (SH: Replacement of old damaged worn-out street light poles by octagonal pole & i/c supplying laying Al ... Flood light , ... gate light , ... worn-out street lights ... street lights etc.
AME and repairs to the Street Lights and high masts handed over by TMC to TTD and Replacement of street light fittings damaged pole copings, UG cables etc., for TTD under taking maintenance of main roads leading from MR Palli to lakshmi puram circle and SGS College road to DR Mahal in ESD-West, TTD, Tirupati for the year 2026-27
Supply and transportation of ..120 W.. LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >110 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution, THD10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete . Makes :a) Luminaire Make: Wipro(Skyline)/ Philips(Green Line)/ GE-Venture / Crompton(Nexus/Hawk Series) / Bajaj (Edge)/ Halonix(Modular/(Lumos -Super) / Havells(Endura Series) / Capart(Premium) / Greenlites(HI-Lux) / Polycab / Keselec/ HPL(City Vision)/ Jaquar(Premium) / Eveready / Surya(Pollux) FortuneArrt(Leaf) b) LED Make : Philips Lumileds / CREE/NICHIA/ OSRAM / SAMSUNG /LG
