Loading
Loading…
Loading…
36,629 results • Best match
Needed 6 nos of solar LED Street light
eProcurement System of Government of West Bengal Created By: SOUMEN SAMADDAR Created Date/Time: 11-Feb-2026 04:51 PM Tender Title: Solar Street Light Tender ID: 2025_ZPHD_946482_12
INSTALLATION OF LED STREET LIGHT FROM HOUSE OF BISHNUPADA NASKAR TO HOUSE OF SHAILEN DAS
eProcurement System of Government of West Bengal Created By: DIBYENDU NASKAR Created Date/Time: 02-Jan-2026 03:55 PM Tender Title: STREET LIGHT Tender ID: 2025_ZPHD_949171_33
LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3), XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) (Q2), LED Batten (Q2), LED Garden Light (V2) (Q2), Molded Case Circuit ... (Q3), LED Tube ... Tube Light (Retrofit ... (Q3), LED Luminaire ... Bay Lighting (Q3), ... TWO STEEL CLAMP ... mild steel wire ... Stainless steel brackets ...
LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5/Section 3) (Q3)
Repairing of LT Panel, S/I of 10 HP Pumping plant, S/I of street lights, Repairing of LED Street Lights/LED flood lights and Supply and erection of 1 no. 16mt. High mast with LED flood lights and repairing of existing installed Highmasts
eProcurement System Government of Uttar Pradesh Created By: Alok Nidhi Goel Created Date/Time: 11-Jun-2026 06:19 PM Tender Title: Repairing of LT Panel, S/I of 10 HP Pumping plant, S/I of street lights, Repairing of LED Street Lights/LED flood lights and Supply and erection of 1 no. 16mt. High mast with LED flood lights and repairing of existing installed Highmasts Tender ID: 2026_RKUMP_1132563_2
Comprehensive maintenance of street lighting on PWD roads under West Electrical Division 2025-26 (SH- Supplying and Laying of cable, Repairing of Street light, High Mast, Fixing of LED fitting on Outer Ring Road Near Bhera Enclave round about etc
eTendering System Government of NCT of Delhi Created By: Chander Singh Rawat Created Date/Time: 07-Jan-2026 03:08 PM Tender Title: Comprehensive maintenance of street lighting on PWD roads under West Electrical Division 2025-26 (SH- Supplying and Laying of cable, Repairing of Street light, High Mast, Fixing of LED fitting on Outer Ring Road Near Bhera Enclave round about etc Tender ID: 2025_PWD_283872_1
Maintenance of street lighting on various roads in various Sectors at U.T Chandigarh (Replacement of existing defunct LED street light fitting, switchgear, burnt out cable, casting of cement collar and shifting of pole in Village Sarangpur Phirni, Dh
DSR item no.8.13 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K(As per ANSI Bin), SDCM(Standard Deviation Color Matching) 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
