Loading…
Loading…
928 results • Best match
S&T works in connection with development of Goods Sheds at Tajsultanpur and Dharashiv stations of Solapur Division.
Supply of 6 Core Single mode armoured Optical Metre Fibre Cable Make: Polywire or Finolex or Network Cable or Vidhya Telelinks or Sterlite Technologies.(Inspection by Consignee)
Development work for the Gautam Buddha Eco Park project located in the village of Undi, Pindra Tehsil, Varanasi district, Sarnath
Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2 indoor Network Switch having features and specifications etc. as mentioned here under: At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports with non-blocking architecture by having Switching capacity of min. 168Gbps and packet forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ, Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening. RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR, WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED, OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India, temperature. Certificate: UL, CE, FCC, NEMA-TS2, IEC/MIL STD for Shock , Vibration & Drop Certificate. OEM Should have Certificate for Industrial Cyber Security Capability IEC-62443-4-1:2018, ISO 45001, ISO 27001 and ISO 14001 Certified or Equivelent Indian Certificate. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India, D S R E&M 39.3.1 2025
Up-Gradation of CTP Office Rooms including Civil Electrical and Air Conditioning Works at Helicopter Division HAL HC
Supply, laying in the already excavated cable trench/existing duct/fixing on wall/cable tray/iron structure using suitable clamps etc./ encasing in pipe, testing and commissioning of 10 pair jelly filled armoured copper conductor of 0.5mm dia polyethylene insulated cover, twisted into pairs, colour coded, pairs laid up, fully filled with petroleum jelly as a moisture barrier, core wrapped with non-hygroscopic polyester tape to contain the jelly, covered with aluminium poly-laminates screen, polyethylene sheath extruded over aluminium screen, polyethylene tape over the above sheath, armoured with galvanised steel tape and outer polyethylene sheath underground telecommunication cable including both end terminations on the existing krone type junction box complete in all respects.
Construction of new G plus 3 Academic building in the campus of the Jnan Chandra Ghosh Polytechnic-SITC of Air Conditioning System.
Supply, design, fabrication, installation of MS structural work and hanging arrangements for AC equipment & accessories like AC IDUs, Ducts, Pipes, Cable Trays, ODU Structures and other AC accessories : M.S. works in structures/brackets made out from hanger rods, channels, flats, angles, tees etc. to sizes specially bent, twisted, forged; making holes drilled and fitted to rafter of trusses, side rails etc with necessary bolts, nuts, washer or screws etc. The above structure should be painted 2 coats synthetic enamel paint over 2 coats of red lead primer. The drawing of MS structure for each unit to be approved by EIC. Note: As applicable (a) The Agency must procure the materials from the Manufacturer / OEM or from their authorized sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. (b) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. (c) If any refurbished material is supplied and installed, penal action will be taken as per existing rules. (d) Rates are inclusive of all taxes and duties including GST & LWC.
Construction of New Building (G plus 4) with foundation of (G plus 8) in the Court Premises of Bongaon in the District of North-24-Parganas ---- SITC of AC Machine.
SITC OF CONTROL / COMMUNICATION CABLING Supply & laying of XLPE insulated copper control cabling (7 Core x 2.5 sqmm. flexible copper cable) between indoor to outdoor unit with necessary cable conduit & fittings. The cabling shall be bundled properly and shall be properly aligned with the refrigerant piping. (Make: Polycab / Gloster / Finolex / KEI / Havells)
Electromechanical Works of 3x40 MW Sirkari Bhyol Rupsiabagar HEP including Detailed Design, Engineering, Manufacture, Supply, Erection, Testing, commissioning and other associated different works on EPC (Engineering, Procurement and Construction)
Power, Control and instrumentation cables, cables trays, supporting structures, complete with cable terminals and all accessories as per specifications and scope defined in Chapter 15 of Section IX- (PTS).