Loading
Loading…
Loading…
57,789 results • Best match
construction of RCC chamber and laying of sewar pipe at various places in municipal board degana
Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP3 class (with s/s ends) IS: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 300 mm internal diameter
Supply and Laying of NP3 Pipe Formarla colony at Ambala-Kaithal Road in ward no 14
eProcurement System Government of Haryana Created By: Jitender kumar Mutneja Created Date/Time: 09-May-2026 09:48 AM Tender Title: Supply and Laying of NP3 Pi... Tender ID: 2026_HRY_518676_1
Construction of 6 No manhole chambers and laying of 75 Rmt DI pipe of 150mm dia
Laying and testing in trenches to be levelled to grade, centrifugal cement mortar lined ductile iron(spun) pressure pipes confirming to BIS 8923-2000 class K-7,suitable for tyton(push on joints) inculding short pieces , tail pieces, plugs of required nos,cutting pieces where- ever required ( earth work in trenches and cost of joints to be measured and paid for separately ) including carriage in all leads and lifts complete in all respects to the best satisfaction of the Engineer-in-Charge. 150mm dia K7.
SH Providing Laying and Testing of MSERW pipe 80 mm dia 384 Rmt. and Spot welding of 80 mm dia MSERW/G.I. pipe at various Rds.
Providing laying, jointing (by way of circumfrential butt welded joints by electrical arc welding) and testing of MSERW pipe of following dia meters confirming to BIS 3183-2007 confirming to L-290 pipe of following diameter (latest with up to date amendments) steel grade A & wall thickness as specified below with bevelled ends and capable of withstanding required test pressure in a random length of 4 to 7 meters, including manufacturing reducers/ tapers, all short pieces, beds etc. as per site requirement made from parent tubes. The laying of pipe will include all operation such as cutting. welding, jointing, fabrication of bends, tees etc. including lowering and laying in excavated trenches to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The pipes shall be factory galvanized (zinc coating both inside and outside) as per relevant IS standards and the damaged portion of the pipes and specials made form the parent tube shall be provided anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be measured and paid for separately).
IMPROVEMENT OF FILTERED WATER SUPPLY NETWORK BY LAYING OF DI PIPE NEAR PREM. NO. 36,37 TMB LN, 24, 25, 23, 22 ETC. KUSTIA RD. IN WD. NO-66. (APAS) PROJECT ID-APAS/01/149/61/0003
Tender Inviting Authority: DIRECTOR GENERAL, WATER SUPPLY DEPARTMENT
M and R to water supply at Ausa Industrial Area... Annual maintenance of distribution pipeline. (Estimated Cost Rs.13,41,100.00)
eProcurement System Government of Maharashtra Created By: Kalpesh Lahiwal Created Date/Time: 04-Jun-2026 06:03 PM Tender Title: M and R to water supply at Ausa Industrial Area... Annual maintenance of distribution pipeline. (Estimated Cost Rs.13,41,100.00) Tender ID: 2026_MIDC_1304372_1