Gorakhpur Tender Results

Renewal work of Tilsar badgo Gram me Mishra ji House Link Road in Distt Gorakhpur in FY 2025 26 Lot No 24 of 50

Renewal work of Usri Khas Link Road in Distt Gorakhpur in FY 2025 26 Lot No 32 of 50

Renewal work of Demusha Panchayet Bhavan to Vishundev Pasi House hote hue Viskarpur Link Road in Distt Gorakhpur in FY 2025 26 Lot No 48 of 50

CONNECTION STRAP AS PER CLW DRAWING No.03/3/19/56/ALT-6 WITH GREY ENAMELED PAINT TO IS-8662/93.

HRC Fuse DIN type 40 Amp, Size-000, 690 Volt, Capacity 80/120kA, Confirming to IEC60269-2, IS:13703 Pt.2/Sec.2 and as per Cat. No.03915 of rating 40 A of M/s WOHNER or Cat. No. NH00GG69V40 of M/s Ferr

Washer and Destruction Parts etc.

Dust excluder for 203 mm bogie

Compensating ring of size 4 mm as per Drg No 1227229, Alt. 06R, item-2 Material: X5CrNi18-10.

Collar for Screw etc.

Fogging Machine (V2) as per IS 14855 (Part 1) (Q2) (3 (3 ))

for the Diversion Height raising of 220 KV PGCIL Maharajganj Line and 220 KV PGCIL Anand Nagar Line between Multi Circuit Location No.10 to DC Tower No 30 due to infringement of Sahajanwa-Doharighat New Rail Line proposed by N.E.R. under ETD II GKP.

for the Diversion Height raising of 132 kV Gola Khajani S.C. Line and 132 kV Gola Bhagwanpur S.C. Line on D.C. Toweer due to infringement in area of new developed industrial corridor by Gorakhpur Industrial Development Authority under ETD II GKP

THE WORK OF DIVERSION AND HEIGHT RAISING OF 220 KV TANDA BARAHUA TRANSMISSION LINE BETWEEN LOCATION NO 243 to 250 DUE TO SAHJANWA DOHARIGHAT NEW RAIL LINE PROPOSED BY N E RAILWAY UNDER ELECTRICITY TRANSMISSION DIVISION II GORAKHPUR

Ward no.06 mai Mohit harijan ke ghar se Kashinath ke khet tak C.C raod and nali nirman karya

Ward no.02 mai Om Prakash ke ghar ramashankar ke khet tak C.C sadak nirman karya

Nagar Panchayat Uruwa Bazar ke ward no07 mai Golipar mai Ramashankar yadav ke ghar se Sonu ke ghar tak Udaybhan ke ghar tak C.C road and nali nirman karya

Ward no.13 mai Ayodhya Yadav ke ghar se Chaluaapar bagh tak nala nirman karya

Ward no.10 mai Main road se Ashok gupta ke ghar se Hanuman Mandir hote hhua Subhash Jaiswal ke ghar tak C.C road aur nali nirman karya

Compounded Feeds for Cattle (V3) ISI Marked To IS 2052 (Q2) (3 (3 ))

Ward no. 03 mai Parsa khurd mai Nakchad ke ghar se piche se Ramesh ke ghar tak nala nirman karya

Ward no.14 Nakhauja chhini mukhiya marg se Rajesh Yadav ke ghar tak C.C sadak nirman karya

Ward no.03 mai Amodha pitch road se Khoh sampark marg hote hua Satish singh ke khet tak C.C road karya

Ward no.05 mai Uruwa Mahalanpar road se Dhi sthan tak C.C raod nirman karya

Ward no.06 mai Dhobhi tola se Amit tiwari ke ghar tak C.C road and nali karya

Ward no.03 mai Parsa Khurd mai Ram Achal ke ghar se Manilal ke ghar tak C.C sadak nirman karya

Ward no.06 mai Kishunpur tiharay se Ramjanki marg bharwalliya modh tak C.C road and nali nirman karya

Nagar Panchayat Uruwa Bazar ke ward no.11 mai Tiwari Parsa mai Premsagar Tiwari ke ghar se Bandhu Tiwari ke ghar tak Interlocking nirman karya

Ward no.04 mai Kotiya Bhumidhara marg se Ramjas ke ghar se pulliya tak C.C sadak nirman karya

Ward no.09and03 mai Ram Janki marg se primary school Tadi tak C.C road and nali nirman karya

Synthetic Thermoplastic (Textile Reinforced) Hose 31.5 mm nominal Bore Type-2 for water purpose to IS:12585/2023. ISI marking on each length of Hose should be as per IS:12585/2023.

Switch plate assembly complete along with polycarbonate cover frame and powder coat

Nylon bush for alternator suspension bracket etc.

Fabricated Special Purpose Vehicle on Truck/Van (Q3) (3 (3 ))

Fabricated Special Purpose Vehicle on Truck/Van (Q3) (3 (3 ))

Pillar Glass (Small)

Design, Supply, Installation, Testing and Commissioning of Condensate Recovery System at KGM & LKU Coaching Depot Laundry in Izzatnagar Division.

Hydrants (Landing Valve) asper IS5290 (Q2)

3 KVAR metalized polypropylene, Nitrogen gas filled, Wavy-cut, 3 phase, self healing type capacitors etc.

Inj. Tirzepatide 7.5 mg

1, Pre-Op Toric Reference Marker with Bubble Level. 2, 23 G sharp tipped straight cutting scissors. 3, Disposable bimanual cannula handpiece set with polisher 21 G.

3 KVAR metalized polypropylene, Nitrogen gas filled, Wavy-cut, 3 phase, self healing type capacitors etc.

3/8 inch Air filter Regulator with inbuilt gauge, metal bowl and fitted with 2 Nos of connecting hex bolt & spacer washer with O-rings. Part no: W2000-10-W-M1, Make: CKD.

Synthetic Web Equipment Improved Version (MHA) (Q2)

Joint less Grooved copper contact wire 107 Sq mm made out of continuous cast copper wire rods confirming to RDSO specification no-TI/SPC/OHE/CW/0971 . (Material supply in a wooden drum) (Warranty Peri

M.S Slotted Cheese Head Screw M5X12 mm with nickel plated as per IS 1366:2002 or latest MAKE/BRAND-"DKE"

UN-INSULATED CADMIUM COPPER CATENARY WIRE 65 Sq. mm. (19/2.10 mm) as per RDSO SPECIFICATION No. TI/SPC/OHE/CAT (Cu-Cd)/0971 (Warranty Period: Up to 30 months from the date of delivery.)

SURGE ARRESTER FOR 3 PHASE LOCO AS PER CLW'S SPECN. NO. CLW/ES/3/0016

Wear Plate for Bogie Frame Assly.to drg. no. ELW/BSL/WAM4/4/F-64-017 Alt 1.

Set of contacts (Fixed and mobile) for contactor BPS 15-15 C2 for convertor and Hotel Load as per document no. HBTA420418 R0001 and HBTA 420419R0001 Set.

Hex. Head Screw M24 x 100 to IS:1364 (Pt.-2)/2023, IS:1367(Pt.-3)/2017, CE , property class - 10.9, coating as per RCF Specification - MDTS-057 . Grade & make should be clearly embossed at suitable lo