Loading
Loading…
Loading…
11,338 results • Latest
1)Maintenance of 11kV, 3.3kV and 550V OH line 2) Tree Trimming and Bush Cutting 3) Supply and installation of surge arrestor and chemical earth pit at CB Incline
Supply and Installation of Overhead spacer and Earth continuity at Chora 10 Pit and Haripur Colliery
Fabricated Hand Brake Wheel.
Supply and fitting of Tower Light at Coal Depot, Electrical Surface Substation (elect.), Magazine (Explosive House), Weighbridge, Unit Workshop and Store
1)Making 11KV grade Air Break Drawn-Out Switch (Gang Switch) (01 No.) 2) Maintenance of 11KV Overhead line from 4 no. pit to 6 no. pit 3) Urgent rectification of damaged 3.3KV and 440V Overhead lines with Poles due to Heavy Storm
Supply and fitting of 15 nos straight through joints in underground of Siduli Colliery under Kenda Area
Handling and Transport on Lumpsum Basis - Transport Service
Moisture Absorbent Pad
HYDRAULIC CYLINDER
PUMP SPARES FOR MINES
SIMPLEX MAKE SDL SPARES
Customized AMC/CMC for Pre-owned Products - Comprehensive AMC of Phaco Emuliser; As per SLA; Comprehensive Maintenance Contract (CMC); As per SLA; No
Splitor Cotter Pin (Q3)
Erection of Temporary infrastructure (Civil Works) in connection with the celebration of the Independence Day 2026 at campus of the office of the District Magistrate, Paschim Bardhaman under Asansol Division, PWD .
Running repair for Kharif Irrigation from July 2026 to October 2026 of R.B.M.C. (Ch. 0 to Ch. 290) of Sali Diversion Scheme under Damodar Head Works Sub-Division in Block PS Barjora, Dist Bankura
AMC of Integrated Security and Surveillance System - CCTV SYSTEM; Comprehensive; Hardware, Software, Networking System; Consumables to be provided by Service Provider (included in the contract cost)
1. GAS FC BUTTERFY VALVE DN 8" + ACTUATOR, 2. GAS FC BUTTERFY VALVE DN 10" + ACTUATOR, 3. GAS FC BUTTERFY VALVE DN 16" + ACTUATOR, 4. GAS FC BUTTERFY VALVE DN 18" + ACTUATOR
ISMC250 BD EXT TOP STRIPPER GUIDE FOR GROOVE NO 3C. DRAWING NO. MOD - 2604 RV00; MATERIAL C45. "MC250 3C EXT TOP" TO BE STAMPED ON NON-WORKING SURFACE, LETTER HEIGHT MIN 10MM. UNMACHINED SURFACE MUST BE KEPT FREE OF UNDULATIONS BY GRINDING. ITEM SURFACE TO BE CLEANED AND COATED WITH HEAT RESISTANT PAINT., 2. ISMC250 BD TOP GUIDE FOR GROOVE NO 4B. DRAWING NO. MOD - 2605 RV00; MATERIAL C45. "MC250 4B ENT TOP" TO BE STAMPED ON NON-WORKING SURFACE, 3.ISMC250 BD TOP GUIDE FOR GROOVE NO 5A/6A. DRAWING NO. MOD - 2606 RV00; MATERIAL C45. "MC250 5/6A EXT TOP" TO BE STAMPED ON NON-WORKING SURFACE, 4.ISMC250 BD TOP GUIDE FOR GROOVE NO 5A/6A. DRAWING NO. MOD - 2606 RV00; MATERIAL C45. "MC250 5/6A EXT TOP" TO BE STAMPED ON NON-WORKING SURFACE, 5.EA150X10/12 GROOVE F EXIT TOP GUIDE AS PER DRAWING NO MOD-3365; PART 36. MATERIAL, CASTING TOLERANCE, REQD MACHINING ALLOWANCE, SURFACE FINISH AND DIMENSION AS PER DRW. GUIDE TO BE MARKED AS "EA150-10/12 DR F EXIT" USING 3D STEEL LETTERS, ON NON WORKING SURFACE. HEAT RESISTANT COATING: PRIMER AND SEA BLUE PAINT TO BE APPLIED., 6.EA150X10/12 GROOVE D EXIT TOP GUIDE AS PER DRAWING NO MOD-3367, PART 52. MATERIAL, SURFACE FINISH AND DIMENSION AS PER DRW. GUIDE TO BE MARKED AS "EA150-10/12 DF D EXIT" USING 3D STEEL LETTERS, 7.EA150X10/12 GROOVE D EXIT BOTTOM GUIDE AS PER DRAWING NO MOD-3367, PART 53. MATERIAL, SURFACE FINISH AND DIMENSION AS PER DRW. BOTH GUIDE TO BE MARKED AS "EA150-10/12 DF D EXIT" USING 3D STEEL LETTERS, 8.EA150X10/12 GROOVE B EXIT TOP GUIDE AS PER DRAWING NO MOD-3369; PART 68. MATERIAL, SURFACE FINISH AND DIMENSION AS PER DRW. BOTH GUIDE TO BE MARKED AS "EA150-10/12 DR B EXIT" USING 3D STEEL LETTERS, 9.EA200X16 GROOVE D EXIT TOP AND BOTTOM GUIDE AS PER DRAWING NO 0188004- 64.551. 1SET = 1 PC TOP (PART 552) + 1PC BOT (PART 553). MATERIAL, SURFACE FINISH AND DIMENSION AS PER DRW. BOTH GUIDE TO BE MARKED AS "EA200-16 DF D EXIT" USING 3D STEEL LETTERS, ON NON WORKING SURFACE. HEAT RESISTANT COATING: PRIMER AND BLUE PAINT TO BE APPLIED., 10. EA200X20 GROOVE A EXIT TOP AND BOTTOM GUIDE AS PER DRAWING NO 0188004- 64.675. 1SET = 1 PC TOP (PART 676) + 1PC BOT (PART 677). MATERIAL, SURFACE FINISH AND DIMENSION AS PER DRW. BOTH GUIDE TO BE MARKED AS "EA200-20 DF A EXIT" USING 3D STEEL LETTERS
Custom Bid for Services - OUTSOURCING OF JOBS RELATED TO OCCUPATIONAL HEALTH CENTRE (OHC), AT NSPCL - DURGAPUR Similar Category Operation and Maintenance Power House/Power Plant
Set of Seals
Fire Hoseswith Delivery Coupling (Q1)
Recon Exchange of 01No. failed Cummins Make Engine Model- (QSK19C SL.No.- 25465937) applicable for BE1000 Hydraulic Excavator
Civil and Electrical repairing works for quarters of D, E and F block in CSIR-CMERI new colony campus, durgapur-09
Handling, Transport and Other Mining Services - Percentage quote based - Handling & Transport Service
Custom Bid for Services - Upkeep of Intake water channel in the riverbed of River Damodar Similar Category Customized AMC/CMC for Pre-owned Products
Handling, Transport and Other Mining Services - Percentage quote based - Handling & Transport Service
Repairing of tank and other misc job under the environment department bankola area.
Procurement of different misc consumables for TG AHP and
Various job related to cluster 11 of Shankarpur UG of Bankola Area.
4203084061 SLIP RING INDUCTION MOTOR
CYLINDER HYDRAULIC FOR SKIRT LIFTING, BOF
Platform Step Ladder (V2) (Q3)
Repairing and fitting of 01 no. traction motor (RHS) for the SDL -1831 running at 08 No pit of Bankola Colliery.
AC LT FLAME PROOF SQUIRREL CAGE INDUCTION MOTOR, 0.75 KW, 3PH, 415V(± 10% ) (Y), 50HZ(+ 3%/-6% ), 1500 RP
In Connection with forthcoming general election to the West Bengal State Legislative Assembly, 2026, there is an urgent need of procurement of some printing materials of different forms and covers. The list of such articles is placed herewith in sepa
Defibrillator (Q2)
PROCUREMENT OF ESP SPARES FOR DSTPS U2
Running repair for Kharif Irrigation from July 2026 to October 2026 of Dy1 (Ch 0 to Ch. 30) of LBMC of Sali Reservoir Scheme under Damodar Head Works Sub-Division in Block PS Gangajalghati Dist Bankura
Maintenance and running repair to the Durgapur Branch Canal in between Ch0 to Ch268 in connection with Kharif Irrigation 2026 from the period July 2026 to October, 2026 under Durgapur section No.-III in Block PS Kanksa
IP CONVERTER DETAAILS AS PER SPECIFICATION(MAT CODE 279540100)
M/R to Inlet Channel of Kanjore Reservoir scheme near weir structure of Katabundh Irrigation Section under Damodar Headworks Sub-Division in PS BlockBarjora Dist Bankura
M/R to Feeder Canal in between Ch 0 to 100 W.C1 in between Ch 0 to 16 for a length of 2.33 Km. of Kanjore Reservoir Scheme under Katabundh (I) Section of Damodar Headworks SubDivision in connection with Kharif Irrigation 2026
M/R to Kotaler Danra in between Ch0 to 94 Majher Danra in between Ch 0 to Ch65 for a length of 2.93 Km of Kanjore Reservoir Scheme under Katabundh (I) Section of Damodar Headworks SubDivision in PS Block Barjora Dist Bankura
Removal of Silt and jungle cutting of Maliarajore near Natungram Village in BlockPS Barjora Dist Bankura under Durgapur Section No I of Damodar Head WorksSub-Division
Clearing and removal of water hyacinth 5(five) times in between ch.310 to ch.324 of LBMC of Durgapur Section NoIII under Damodar Headworks SubDivision in Block PS Kanksa, DistPaschim Bardhaman
Running repair for Kharif Irrigation from July 2026 to October 2026 of Dy-1 (Ch.0.00 to Ch. 30.00) Dy-2 (Ch.0.00 to Ch. 40.00)Dy-3 (Ch.0.00 to Ch. 40.00) of R.B.M.C. Sali Diversion Scheme under Damodar Head Works Sub-Division
Maintenance and running repair to WC-207.00 and WC-275.00 of LBMC and WC-234.50 WC-259.77 and WC-267.50 of DBC in connection with Kharif irrigation 2026 from period July 2026 to October 2026 under Durgapur section No.-III in Block P.S. Kanksa