Government Tenders Published on 15 February 2025

Rashtriya Chemicals And Fertilizers Limited (rcf)

Indian Army

Bharat Heavy Electricals Limited (bhel)

Hindustan Aeronautics Limited (hal)

Development Commissioner (micro Small & Medium

Border Security Force (bsf)

Commissionerate Of Technical Education

Bharat Heavy Electricals Limited (bhel)

Indian Army

Indian Army

Solar Security Light 1, Solar Security Light 2, Solar Security Light 3, Solar Security Light 4, Solar Security Light 5

Nlc India Limited

PHOSPHOROUS BRONZE SLEEVE OF SIZE OD 205MM X ID 175MM X LONG 180 MM, PHOSPHOROUS BRONZE SLEEVE OF SIZE OD 72MM X ID 52MM X LONG 300MM

Armoured Vehicles Nigam Limited

Indian Army

Munitions India Limited

Sanitary Napkins Vending Machines (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination ITC available to buyer Yes Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) Yes Inspection to be carried out by Buyers own empanelled agency Yes Type Of Inspection Post Dispatch Bid Number ( ) : GEM/2025/B/5951228 Dated : 15-02-2025 Bid Document 1/7 Name of the Empanelled Inspection Agency/Authority Board of Officers Auto CRAC Days 30 Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Required No ePBG Detail Required No MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 2. Inspection of Stores by Nominated Inspection Authority/Agency of buyer or their authorized representatives An independent third party Professional Inspection Body can help buyer in mitigating buyer’s risk with pre- dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentation 2/7 conform to contractual requirements. The buyer has a right to inspect goods in reasonable manner and within reasonable time at any reasonable place as indicated in contract. Inspection Fee/Charges (as pre-greed between buyer and Inspection Agency) would be borne by the buyer as per their internal arrangement but may be recovered from the seller if the consignment failed to conform to contractual specification and got rejected by the Inspection Officer .If so requested and accepted by the seller, initially seller may pay for inspection charges as applicable and get the same reimbursed from buyer if consignment accepted by the Inspecting Officer . For reimbursement seller has to submit proof of payment to Inspection Agency. Seller/OEM shall send a notice in writing/e-mail to the Inspecting officer/inspection agency specifying the place of inspection as per contract and the Inspecting officer shall on receipt of such notice notify to the seller the date and time when the stores would be inspected. The seller shall, at his own expenses, afford to the Inspecting officer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or have been manufactured in accordance with the technical particulars governing the supply. The decision of the purchaser representative/inspection authority regarding acceptance/rejection of consignment shall be final and binding on the seller. The Seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which the Inspecting officer may demand of him for any test, and examination, other than special or independent test, which he shall require to be made on the seller's premises and the seller shall bear and pay all costs attendant thereon. The seller shall also provide and deliver store/sample from consignment under inspection free of charge at any such place other than his premises as the Inspecting officer may specify for acceptance tests for which seller/OEM does not have the facilities or for special/independent tests. In the event of rejection of stores or any part thereof by the Inspecting officer basis testing outside owing to lack of test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in the inspection and/or test. Cost of test shall be assessed at the rate charged by the Laboratory to private persons for similar work. Inspector shall have the right to put all the stores or materials forming part of the same or any part thereof to such tests as he may like fit and proper as per QAP/governing specification. The seller shall not be entitled to object on any ground whatsoever to the method of testing adopted by the Inspecting officer. Unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will be borne by seller. Inspecting officer is the Final Authority to Certify Performance/accept the consignment. The Inspecting officer’s decision as regards the rejection shall be final and binding on the seller. The seller shall if so required at his own expense shall mark or permit the Inspecting officer to mark all the approved stores with a recognised Government or purchaser's mark. 3. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However, H-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers, and H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 If buyer has mentioned MSE purchase preference in ATC then service provider is required to upload MSE certificate of the corresponding service category for buyer’s evaluation. Sanitary Napkins Vending Machines ( 10 pieces ) Technical Specifications * As per GeM Category Specification 3/7 Specification Specification Name Bid Requirement (Allowed Values) GENERAL Type of machine Automatic Type of fitting Wall Mountable Color Blue Operating features Free vending Multiple coins accepted No Multiselection of Napkin type No Number of selection options 3 Accessibility for free vending utility service Token Type of loading Spiral Maximum Storage Capacity (Nos)(Nos) 50-75 FUNCTIONAL FEATURES Material of the outer body Mild Steel(MS) Built-in charger Yes Mode of function Stand alone Operating Power source Electronic Battery Backup available Yes Battery Backup time (hrs) 6-10 Power Consumption(Watt) 8 DIMENSIONS Width (mm) 200-400 Depth (mm) 200-400 Height (mm) 500-800 Weight (kg) 10-20 Thickness of SS/MS sheet (mm) 1.2 Thickness of FRP/Plastic sheet (mm) 1-2 PACKING Type of Packing Cartoon Box CERTIFICATIONS Certification Available BIS Input Tax Credit(ITC) (( )) and Reverse Charge(RCM) ( ( )) Details 4/7 ITC on GST ITC on GST Cess 100% 100% Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 1 *********** ***********NILGIRIS 10 30 Buyer Added Bid Specific Terms and Conditions 1 . Generic Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %. 2 . Generic Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only. 3 . Generic While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the screenshot of GST portal confirming payment of GST. 4 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses All Sellers are requested to read the specification and instructions carefully before quoting. All Sellers are requested to kindly upload the compliance statement that the subject store/item will be sup plied as per consignee's/buyer's specification.

Indian Oil Corporation Limited

Kiocl Limited

National Rural Health Mission (nrhm) State Health Society

Glass Cleaner, Liquid (V2) as per IS 8540 (Q4) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years Of Experience and Turnover Yes Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 2 Days Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Number ( ) : GEM/2025/B/5955697 Dated : 15-02-2025 Bid Document 1/6 EMD Detail Required No ePBG Detail Advisory Bank AXIS BANK LTD ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 12 (a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : Head - Finance EMRI GREEN HEALTH SERVICES 108 Emergency Management Centre Naroda- Kathwada Road, Naroda, Ahmedabad 382 330, Gujarat, India (Emri Green Health Services) MII Purchase Preference MII Purchase Preference No MSE Purchase Preference MSE Purchase Preference Yes 1. If the bidder is a Startup, the bidder shall be exempted from the requirement of "Bidder Turnover" criteria and "Experience Criteria" subject to their meeting of quality and technical specifications. If the bidder is OEM of the offered products, it would be exempted from the "

Indian Army

Aluminium Alloy connector with olive drap chromate over cadmium plate with protective cap Assy, Aluminium Alloy connector with olive drap chromate over cadmium plate with protective cap assy, Aluminium Alloy connector with olive drap chromate over cadmium plate with protective cap assy C, Electrical Cable copper Multi Strands Tin coated Single Core PTFE insulated White Over copper Tinned screened_, Electrical Cable copper Multi Strands Tin coated 2 Core PTFE insulated White with Blue line and white Over copper Tinned screened, Electrical Cable copper Multi Strands Tin coated 3 Core PTFE insulated White with Orange line_ White with Blue line and white Over copper Tinned screened, Electrical Cable copper Multi Strands Tin coated 4 Core PTFE insulated White with Orange line_ White with Blue line_ white with Green line and white, Electrical Cable copper Multi Strands Tin coated 2 Core PVC insulated Pink and Cream Over copper Tinned screened over PTFE Jacket Black_ 22 AWG 2 Core, Electrical Cable copper Multi Strands Tin coated White 22 AWG, Boot Heat Shrinkable Strain relief with meltable inner wall for Adhesive 202K 142 RAYCHEM, Boot Heat Shrinkable Strain relief with meltable inner wall for Adhesive 222D221 Raychem, Heat Shrink Tube Black 1 Dia DR 25 Raychem, Heat Shrink Tube Black 3_4 Dia DR 25 Raychem, Heat Shrink Tube White 10_20mm dia, Heat Shrink Tube Clear 10_20 mm, Heat Shrink Tube Black 1_18 DR 25, Copper Silver Coated Shieled braid 16 x 24 mm dia, Copper Silver Coated Shilded braid 12 x 20 mm dia, Ring large Asper Drg A4 515 SMP 56948_ ID_28_7mm dia, Ring Small Asper Drg A4 515 SMP 56949_ ID_22_5mm dia, Elect Splize Copper Permanent Crimp with insulated and heat Shrink 22_26 AW, ATC Binding Wire Mesh Shielded Silver Coated Copper 0_2 mm dia, Kapton tape 24mm, Insulated PVC Black 18 mm, Adhesive glue Heat Treatment silicon S 1125 Adhesive glue 0_070 ml, Luminscent paint Marker White radiam reflector 50ml, Solder Soft 16 SWG Sn_63__ Pb_37_, Solder Flux Lequid type, Plastic Cover_ 80 Microns Clear 18 x 18 Bid Details 2/27

Nuclear Power Corporation Of India Limited

Indian Army

Aluminium Alloy Connector With Olive drab chromate over Cadmium Plated with Protective cap_Pin type D38999_24_W_C_35PA_1519, Aluminium Alloy Connector With Olive drab chromate over Cadmium Plated with Protective cap_Pin type D38999_24_W_C_35PN_1519, Aluminium Alloy Connector With Olive drab chromate over Cadmium Plated with Protective cap_Socket type D38999_26_W_C_35SN_1423, Boot heat shrinkable strain relief with meltable inner wall for adhesive_202K142_25_0 Raychem, Boot heat shrinkable strain relief with meltable inner wall for adhesive_382A 034_3 Y transition_ Raychem, Copper braid tin coated _12 x 20, Electrical Cable Copper multi strands tin coated 3 core PTFE Insulated white _ white with with blue spiral strip and white with orange spiral, Electrical Cable Copper multi strands tin coated 2 core PTFE Insulated white and white with with blue spiral, Electrical Cable Copper multi strands tin coated single core PTFE Insulated white modified extruded shield braid SCD _22_19_34 AWG Spec _ 19_0_16 M_, Electrical Cable Copper multi strands tin coated single core PTFE Insulated white with black spiral strip _22_19_34 AWG Spec _ 19_0_16 M_27500_22 SB 1T 00 12515 REV_A, CO_Axial RF shield cable 752845314_0 black XLETFE single jacket modified extruded _28_7_36 AWG Spec _ 07_0_13, Electrical Cable Copper multi strands tin coated 2 core FEP Insulated white and pink black XLETFE modified extruded shield braid, HS Sleeve Black 3_4_Raychem DR_25, Heat shrinkable Splice asper pt No_XK11_203_508_22 mmLength, Heat shrinkable Splice asper pt No_XK11_203_508_30 mm length, Splice asper pt No_ X11_209_30 mm length, HS Sleeve white _20_10 mm, HS Sleeve clear _20_10 mm, Ring_As per Drg No_ A4_515_SMP_57251, ATC Binding wire_0_3 mm dia, ATC Binding wire_0_5 mm dia, Kapton tape _24 mm width, Luminescent white paint_Acrylic Marker, Nylon thread white _0_3 mm dia, Glue tape 26 mm width x 0_30 mm thk_Epoxy tape, Adhesive black Heat treatment silicon adhesive_S1125 _ Rechem 30Gms, ISO Prophyl Alcohal _IPA, Acrylic conformal coatns_, Solder soft 16 SWG_Sn_63_ Pb_37, Solder flux_, Dosuti Black_, Tissue paper 25 x 30 Cm_, Wire mesh PMSR width 30 mm _ shield silver coated, Plastic cover 80 microns_24 x 24, Permanent marker pen black_, HS Tube clear_4_2 mm, HS Sleeve _2_5_1_5 mm Bid Details 2/32

Iisco Steel Plant

RIVER SAND, FRESH, IS: 383-1963

Iisco Steel Plant

TUNDISH REFRACTORIES FOR CASTER 1 & 2 SIX STRAND OPEN CASTING, TUNDISH REFRACTORIES FOR CASTER 1 & 2 SIX STRAND CLOSED CASTING, TUNDISH REFRACTORIES FOR CASTER 1 & 2 BACK-UP LINING, TUNDISH REFRACTORIES FOR CASTER 1 & 2 COVER REFRACTORIES, TUNDISH REFRACTORIES FOR CASTER 3 EIGHT STRAND OPEN CASTING, TUNDISH REFRACTORIES FOR CASTER 3 FOUR STRAND OPEN CASTING, TUNDISH REFRACTORIES FOR CASTER 3 FOUR STRAND CLOSED CASTING, TUNDISH REFRACTORIES FOR CASTER 3 BACK-UP LINING, TUNDISH REFRACTORIES FOR CASTER 3 COVER REFRACTORIES

National Aluminium Company Limited, Bhubaneswar

HYDRAULIC JACK CAP 20 TONS- 69994195110_1_1000068919_UOM_EA, HYDRAULIC JACK CAP 45 TONS-99904700540_2_1000068919_UOM_EA, HYDRAULIC JACK CAP 90 TONS- 80009032080_3_1000068919_UOM_EA, HYDRAULIC JACK CAP 30 TONS-85307000090_4_1000068919_UOM_EA, HYDRAULIC JACK CAP 20 TONS- 69920010250_5_1000068919_UOM_EA, LIGHT WEIGHT TWO SPEED HAND PUMP FOR USE WITH JACKS OF 20-30-50 TONs CAPACITY-31215001340_6_1000068919_UOM_EA, LIGHT WEIGHT TWO SPEED HAND PUMP FOR USE WITH JACK OF 100 TONs CAPACITY- 69994505010_7_1000068919_UOM_EA, FLAT HYD. JACK CAP 45-50 TONS-69994080050_8_1000068919_UOM_EA

Security Printing And Minting Corporation Of India Limited

Chennai Petroleum Corporation Limited

Salem Steel Plant

Nmdc Steel Limited

1600462409, 1700250290, 1600510616, 1600510671, 1600510723, 1600510722, 1600510719, 1600513013, 1600510717, 1700311077, 1600510601, 1600510598, 1600510596, 1600510602, 1600510599, 1600510595, 1600510594, 1600510615, 1600510614, 1600510716, 1600510715, 1600510617, 1600510613, 1600510612, 1700311062, 1600510611, 1600510610, 1600493849, 1600510609, 1600510605, 1600544469, 1600544468, 1600544467, 1600544466, 1600544465, 1600544464, 1600544463, 1600544461, 1700311071, 1700311123, 1700311121, 1700311067, 1700311066, 1700311065, 1700309421, 1600493848, 1600458454, 1600458220, 1600458195, 1600458202, 1600458177, 1700204897, 1700204895, 1600458189, 1700309420, 1700311064, 1700311063, 1700204896, 1600415084, 1700204893, 1700204874, 1600493853, 1600493852, 1600458193, 1600458178

Hindustan Aeronautics Limited (hal)

Amreli District Panchayat

Indian Army

Triangle Tips ISCAR TPKR 43-PDTR HS 2204 IC 328, Triangle Tips ISCAR SPKR 42-EDTR HSS 2203 IC 328, Drill Twist Ts 6.8MM, Drill Twist Ps 8MM, Drill Twist Ps 7MM, Drill Twist Ps 8.1 MM, Drill Twist Ps 8.2MM, Drill Twist Ps 8.3MM, Drill Twist Ps 8.4MM, Drill Twist Ps 8.5MM, Measuring Tape 5 Mtr, Die Set M14 x 1.5, Die Set M14x 2, Die Set M12 x 1, Die Set M12 x 1.5, Die Set M10 x 1, Die Set M10 x 1.25, Die Set M10 x 1.5, Die Set M8 x 1.5, Die Set M8 x 1.25, Die Set M16 x1.5, Die set M16x1, Die set M18 x1.5, Die Set M18 x 1, Tap Wrench M2 Collet Type, Tap Wrench M3 collet Type

Border Road Organisation

Border Road Organisation

Rashtriya Ispat Nigam Limited

Food Safety And Drug Administration

Indian Army

Removal of existing of wooden flooring, Combatwall, Maple Hardwood Flooring, Polishing the maple wooden flooring anti skid polish, Line Marking Red Game line for wall boundary lines one tell tale for the front wsf certificate

Iocl Business Development

FIBC bags with liners for PP, FIBC bags without liners, FIBC bags with liners for PTA artwork

Hindustan Aeronautics Limited (hal)

Heavy Engineering Corporation Limited (hec)

Title1, Title2, Title3, Title4, Title5

Indian Army

Nlc India Limited

Moil Limited

Operation And Maintenance Of Other Machines And Plants - Outsourcing of Annual Comprehensive Operation Maintenance Housekeeping of LHD at Underground of Ukwa mine As per tender documents, Operation And Maintenance Of Other Machines And Plants - Outsourcing of Annual Comprehensive Operation Maintenance Housekeeping SDL at Underground of Ukwa mine As per tender documents

Salem Steel Plant

Patan District Panchayat

Bokaro Steel Plant

Industries And Mines Department Gujarat

Kiocl Limited

E-municipalities - Eservices To Citizens And Employees Of

Indian Army

Bharat Sanchar Nigam Limited Portal(bsnl)

PAC Mtce, HPAC Mtce, Ductable Split AC Mtce, SAC Mtce, Cassette AC Mtce, TL Replacement, Fan Rewinding, CL Repairing, AFD Mtce, Operation and Mtce

Munitions India Limited