Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
7,779 live and archived tenders were published on this date.
Adding a sidebar filter continues in Live Tenders while preserving this publication date.
7,779 results • Latest
Bharat Heavy Electricals Limited (bhel)
GAMET P. cup SRTR brg. 124070/124112 XP P2, Gamet DR Flanged cup(H. ty) 140085/140140H
Rashtriya Chemicals And Fertilizers Limited (rcf)
Repair, Maintenance, and Installation of Plant Systems/Equipments (Version 2) - Manufacturing Unit; Unloading Installation and hook up of heat exchanger II of waste heat recovery boiler AS PER SOW AND Quantum of job; Service Provider
Bharat Heavy Electricals Limited (bhel)
DC WHEEL 180MM TYPE 27, ZIRCON DC WHEEL 180MM TYPE 27
Indian Army
Sodium Hypochloride 5 Percent, Chlorhexidine Gluconate Sol equivt to 4 perc w by v with Isopropanol smaller than 10 perc Ethoxylate alkylphenol smaller than 10 perc Fatty Acid Diethanolamide smaller than 10 perc Acid Glacial, 60 perc v by v ethyl Alcohol with Benzaconium Chloride Glycer Dimethicon cyclopenta c 12 to 15 Alkyl Methylparaben Phenoxythanol Stearyl Alcohol Aminomethyl propanol Diazolidinyl urea, 0 point 5 percent w by v Chlorhexidine Gluconate in 70 percent v by v Ethyl Alcohol with moisturizer 500 ml bott with Dispenser, 1 percent w by v available Iodine in Non Oxynoi Iodine Surfactant base 500 ml Bott, 10 Percent Povidone Iodine Sol USP equivqlent to 1 percent available Iodine 500 ml Bott, Alcohol Free 2 percentSaturated Chlorhexidine Gluconate Clothin a non alkaline base 15 to 20 cm in to 15 to 20 cm size, Chlorhexidine Sol containing Chlorhexidine Gluconate BP 7 point 5 percent v by v cetrimide BP 15 percent w by v 500 ml Bott Bid Number ( ) : GEM/2025/B/6048503 Dated : 15-03-2025 Bid Document 1/13
Indian Army
P1 155SW W P1 6348886 SPRING, P1 155SW W P1 6348885 CASING, P1 155SW W P1 6360169 CLAMP, P1 155SW W P1 6337559 CLAMP, P1 155SW W P1 6337556 CLAMP, P1 155SW W P1 6349408 RESTRICTION, P1 155SW W P1 10341209 BANJO FITTING N15-378-6-LM, P1 155SW W P1 10341289 ANGLE PIECE N15-387-1, P1 155SW W P1 6348873 SLIDE RING, P1 155SW W P1 6366473 PISTON, P1 155SW W P1 6350439 CLAMP, P1 155SW W P1 10310938 HEXAGON NUT N3-56-24, P1 155SW W P1 5170920 SPACING SLEEVE, P1 155SW W P1 5169991 ARM, P1 155SW W P1 5188069 VALVE, P1 155SW W P1 10311832 CASTLE NUT N3-61-12, P1 155SW W P1 10335749 BUSHING N15-112-1 8-3 8, P1 155SW W P1 10351545 PIPE CLIP N16-49-7, P1 155SW SV LV7 10351549 PIPE CLIP N16- 49-11, P1 155SW SV LV7 10351553 PIPE CLIP N16-49-15, P1 155SW W P1 10351567 PIPE CLIP N16-49-29, P1 155SW W P1 10361359 WASHER N5-78-64X16, P1 155SW W P1 5183716 VALVE CONE, P1 155SW W P1 5183699 ROD, P1 155SW W P1 6346142 SPRING, P1 155SW W P1 6362975 CLEVIS PIN, P1 155SW W P1 6371625 NEEDLE, P1 155SW W P1 6374228 SPRING, P1 155SW W P1 6303524 VALVE HOUSING, P1 155SW W P1 6304684 CONNECTION, P1 155SW W P1 1154606 HAND PUMP, P1 155SW W P1 10346379 SCREW N2-228-6x45, P1 155SW W P1 5159430 COVER, P1 155SW W P1 10341360 O RING N9-64-3, P1 155SW W P1 5160988 NIPPLE PRESSURE VESSEL, P1 155SW W P1 5161361 TUBE, P1 155SW W P1 5160413 SPRING, P1 155SW W P1 5160414 SPRING, P1 155SW W P1 5160417 SPRING FLAT, P1 155SW W P1 5160938 WASHER, P1 155SW W P1 1147768 CATCH, P1 155SW W P1 1147796 MOUNTING DRG PRESSURE GAUGE, P1 155SW W P1 10685630 CLEVIS PIN N4-26-16x70, P1 155SW W P1 10648544 HEXAGON SCREW N2-140-12X60, P1 155SW W P1 10648538 HEXAGON SCREW N2-140-12X35, P1 155SW W P1 5160049 VALVE CONE, P1 155SW W P1 10648554 HEXAGON SCREW N2-140-12X110, P1 155SW W P1 10648534 HEXAGON SCREW N2-140-12X25, P1 155SW W P1 10495197 HEXAGON SCREW N2-104-3 8X32, P1 155SW W P1 4071771 NUT, P1 155SW W P1 10648497 HEXAGON SCREW N2-140-10X35, P1 155SW W P1 10658165 LOCKING WASHER N5-41-8.4, P1 155SW W P1 3051666 END COVER, P1 155SW W P1 10685514 CLENS PIN N4-26- 12X35, P1 155SW W P1 10685469 CLEVIS PIN N4-26-10x58, P1 155SW W P1 10658173 N5-41-1015 WASHER W TAP STAINLESS STEEL N5-41-10.5, P1 155SW W P1 10693374 HEXAGON SCREW N2-108-6X30, P1 155SW W P1 10409293 SLOTTED SCREW N2-87-4x16, P1 155SW W P1 10409291 SLOTTED SCREW N2-87-4X12, P1 155SW W P1 10409287 SLOTTED SCREW N2-87-4x8, P1 155SW W P1 4070984 END COVER, P1 155SW W P1 10411485 STOP SCREW N2-89- 10X10, P1 155SW W P1 10411487 STOP SCREW N2-89- 10x12, P1 155SW W P1 4071724 END COVER, P1 155SW W P1 10409323 SLOTTED SCREW N2-87-5X8, P1 155SW W P1 10409360 SLOTTED SCREW N2-87-6X6, P1 155SW W P1 10414105 DRIVE SCREW N2-94-00X5, P1 155SW W P1 10414118 DRIVE SCREW N2-94-0X3, P1 155SW W P1 10414120 DRIVE SOCKET SCREW N2-94-Ox5 P1 155SW W P1 10301043 SLING WASHER N15 10 18 22, P1 155SW W P1 10299160 RETAINING RING N5 10 90, P1 155SW W P1 10300003 RETAINING SCREW N2 40 23, P1 155SW W P1 10300004 RETAINING SCREW N2 40 26, P1 155SW W P1 10300087 KEY RING N5 12 20 2.5, P1 155SW W P1 4087664 VALVE PISTON, P1 155SW W P1 10300118 HE AGON SOCKET SCREW N2 100 5, P1 155SW W P1 Bid Details 2/77
Indian Army
P1 155SW W P1 6363094 ARM, P1 155SW W P1 4077844 SAFETY PLATE, P1 155SW W P1 1149427 FIRING DEVICE EU, P1 155SW W P1 4077840 ARM, P1 155SW W P1 5179531 PISTON, P1 155SW W P1 5179551 ARM BRECH RING WITH SCREW MECH, P1 155SW W P1 4076022 TOOTHED WHEEL, P1 155SW W P1 4076029 COG WHEEL, P1 155SW W P1 5176667 PISTON, P1 155SW W P1 4080436 CYLINDER, P1 155SW W P1 4080437 RACK, P1 155SW W P1 6017915 SPRING BREECH RING WITH SCREW MECHANISM, P1 155SW W P1 2025298 BREECH CARRIER, P1 155SW W P1 6358129 PLUNGER BREECH RING WITH SCRW MECHANISM, P1 155SW W P1 6358134 SCREW, P1 155SW W P1 6349435 STOP BOLT BRCH RING WITHSCRW MECH, P1 155SW W P1 6349441 SPRING, P1 155SW W P1 6349444 NUT, P1 155SW W P1 4083347 ARM, P1 155SW W P1 6349445 EXTRACTOR SHAFT, P1 155SW W P1 6358140 PLUNGER, P1 155SW W P1 6350370 BUSH, P1 155SW W P1 6349446 SPRING, P1 155SW W P1 6349447 CATCH, P1 155SW W P1 6349450 SPRING, P1 155SW W P1 6358150 ARM, P1 155SW W P1 6358166 AXLE, P1 155SW W P1 6358168 PIN, P1 155SW W P1 6365836 SPRING BREECH RING WITH SCREW MECHANISM, P1 155SW W P1 5170292 FRONT COVERING RING, P1 155SW W P1 5170280 STRIKER, P1 155SW W P1 5170281 LOCKING CASING FRAME, P1 155SW W P1 6346325 BUSH, P1 155SW W P1 6346362 SHAFT, P1 155SW W P1 6388463 SPRING HELLICAL COMPRESSION, P1 155SW W P1 3053026 ACTUATING CYLINDER, P1 155SW W P1 3053052 ACTUATING SLIDE, P1 155SW W P1 4061911 LOCKING NUT, P1 155SW W P1 4061912 NUT Bid Number ( ) : GEM/2025/B/6056929 Dated : 15-03-2025 Bid Document 1/33
Indian Army
P1 155SW W P1 10770184 SLOTTED SCREW N2-196-4- 40x4.8, P1 155SW W P1 10770186 SLOTTED SCREW N2- 196-4-40X6.3, P1 155SW W P1 10469823 BALL N54-1, P1 155SW W P1 10469820 BALL N54-1-3 16, P1 155SW W P1 10485178 WASHER N5-35-12x16, P1 155SW W P1 10485182 WASHER N5-35-14x18, P1 155SW W P1 10485209 WASHER N5-35-35x45, P1 155SW W P1 10480224 SLOTTED SCREW N2-117-3X10, P1 155SW W P1 10809504 HEXAGON SCREW N2-161-10x65, P1 155SW W P1 10809507 HEXAGON SCREW N2-161-10X80, P1 155SW W P1 10809459 HEXAGON SCREW N2-161-8x40, P1 155SW W P1 10809455 HEXAGON SCREW N2-161-8x30, P1 155SW W P1 10809341 HEXAGON SCREW N2-161-5x50, P1 155SW W P1 10809364 HEXAGON SCREW N2-161-6X10, P1 155SW W P1 10809376 HEXAGON SCREW N2-161-6x35, P1 155SW W P1 10809287 HEXAGON SCREW N2-161-4x8, P1 155SW W P1 10809546 HEXAGON SCREW N2-161-12x70, P1 155SW W P1 10809541 HEXAGON SOCKET SCREW N2-161- 12x46, P1 155SW W P1 10809632 HEXAGON SCREW N2- 161-16x60, P1 155SW W P1 10809730 HEXAGON SCREW N2-161-24x110, P1 155SW W P1 10809536 HEXAGON SCREW N2-161-12x30, P1 155SW W P1 10809540 HEXAGON SCREW N2-161-12x40, P1 155SW W P1 10810329 CROSS REC SCREW N2-163-5x16, P1 155SW W P1 10810366 CROSS REC SCREW N2-163-6x12, P1 155SW W P1 10810368 CROSS REC SCREW N2-161-6x16, P1 155SW W P1 6350434 CLAMP, P1 155SW W P1 10816207 BUSHING N15-111-1 2, P1 155SW W P1 10972228 HEXAGON SOCKET SCREW N2-231-3X16, P1 155SW W P1 10972341 HEXAGON SCREW N2-231-5x50, P1 155SW W P1 10287146 WASHER N5-1-5 3x10 STANDARD PARTS, P1 155SW W P1 10411323 STOP SCREW N2-89-5x8, P1 155SW W P1 10411360 STOP SCREW N2-89-6X6, P1 155SW W P1 10493445 CHECK VALVE N15-114-12-5, P1 155SW W P1 10648364 HEXAGON SCREW N2-140-6X10, P1 155SW W P1 10493896 CONNECTION N15-76-8-SM, P1 155SW W P1 10696140 RECTANGULAR KEY N4-27-4x4x14, P1 155SW W P1 10493523 CHECK VALVE N-15-188-16-SR, P1 155SW W P1 10409367 SLOTTED SCREW N2-87-6X14, P1 155SW W P1 10415329 EYE BOLT N2-95-5X16, P1 155SW W P1 10411449 STOP SCREW N2-89-8x16 COTS-IS6094 PART 3, P1 155SW W P1 10411362 HEXAGON SOCKET SET SCREW F P N2-89-6X8, P1 155SW W P1 10315404 WASHER N5-9006- 10X35, P1 155SW W P1 10314200 WASHER N5-9002-6 4X22, P1 155SW W P1 10314350 TIE MOUNT X12-9006-350, P1 155SW W P1 10314779 COLLAR NUT N3-9002-20 STANDARD PARTS, P1 155SW W P1 10324136 HOSE CLIP N16-14-14, P1 155SW W P1 10324139 HOSE CLIP N16-14- 24, P1 155SW W P1 10324144 HOSE CLIP N16-14-50, P1 155SW W P1 10316983 WASHER N5-42-6.4x12, P1 155SW W P1 10316986 WASHER N5-42-13x24, P1 155SW W P1 10310925 HEXAGON NUT N3-56-5 STANDARD PARTS, P1 155SW W P1 10310926 NUT PLAIN HEXAGON, P1 155SW W P1 10310932 HEXAGON NUT N3-56-12, P1 155SW W P1 10310923 HEXAGON NUT N3-56-4 STANDARD PARTS, P1 155SW W P1 10310921 HEXAGON NUT N3-56-3, P1 155SW W P1 10319894 BUSHING N5-9001-80X40, P1 155SW W P1 10648453 HEXAGON SCREW N2-140-8x25, P1 155SW W P1 6339800 SPRING, P1 155SW W P1 10648469 HEXAGON SCREW N2-140-08x90, P1 155SW W P1 10648384 HEXAGON SCREW N2-140-6X70, P1 155SW W P1 5158498 SPRING, P1 155SW W P1 10648327 HEXAGON SCREW N2- 140-5X12, P1 155SW W P1 10314701 THRUST WASHER, P1 155SW W P1 10299172 RETAINING RING N5-10-125, P1 Bid Details 2/86 155SW W P1 10287136 WASHER N5-1-4.3x8, P1 155SW W P1 10301039 SEALING WASHER N15-10-10X13.5, P1 155SW W P1 10287153 WASHER N5-1-6 4X12, P1 155SW W P1 5158499 SPACER, P1 155SW W P1 10314776 COLLAR NUT N3-9002-10, P1 155SW W P1 10288185 WASHER N5- 1-17x34, P1 155SW W P1 10288215 WASHER N5-1-43x80, P1 155SW W P1 10297178 WASHER N5-20-13, P1 155SW W P1 10301038 SEALING WASHER N15-10-8X11.5, P1 155SW W P1 10301037 SEALING WASHER N15-10-6x10, P1 155SW W P1 10300144 THREAD INSERT N3-29-8X12, P1 155SW W P1 10276214 LOCATING PIN N4-22-3x28, P1 155SW W P1 10276256 LOCATING PIN N4-22-4X20, P1 155SW W P1 10277458 PARALLEL PIN N4-13-10x30 P1/155SW/W/P1 6332709 SPRING, P1/155SW/W/P1 6333509 TRUNNION, P1/155SW/W/P1 10276265 LOCATING PIN N4- 22-4X45, P1/155SW/W/P1 10276315 LOCATING PIN N4-22- 5x36, P1/155SW/W/P1 10276374 LOCATING PIN N4-22- 8X18, P1/155SW/W/P1 10276384 LOCATING PIN N4-22- 8x45, P1/155SW/W/P1 10276387 LOCATING PIN N4-22-8X60 (STANDARDS PARTS, P1/155SW/W/P1 6333634 SCREWED SOCKET, P1/155SW/W/P1 6333635 SCREWED SOCKET, P1/155SW/W/P1 10277110 PARALLEL PIN N4-13-0.8X3, P1/155SW/W/P1 6330417 WASHER, P1/155SW/W/P1 2022858 BEARING HOUSING, P1/155SW/W/P1 12002019 WIRE S-18-1-1, P1/155SW/W/P1 10419453 STOP SCREW N2- 101-8x25, P1/155SW/W/P1 10409370 (N2-87-6X20) SLOTTED CHEESE HEAD SCREW N2-87-M6X20, P1/155SW/W/P1 10807220 CROSS REC SCREW N2-162-3x6, P1/155SW/W/P1 10809331 HEXAGON SCREW N2-161-5X20, P1/155SW/W/P1 10417489 STOP SCREW N2-98-10x16, P1/155SW/W/P1 6333017 PIN, P1/155SW/W/P1 10417628 STOP SCREW N2-98-16X40, P1/155SW/W/P1 10302168 LUBRICATOR N12-6-1, P1/155SW/W/P1 10482172 SLOTTED SCREW N2-77-2x16, P1/155SW/W/P1 10302182 LUBRICATOR N12-3-10, P1/155SW/W/P1 6333033 SPRING HOLDER, P1/155SW/W/P1 10485173 WASHER N5-35-10x14, P1/155SW/W/P1 10809457 HEXAGON SCREW N2-161-8x35, P1/155SW/W/P1 10301732 LOCK WASHER N5-14-MB8, P1/155SW/W/P1 10470757 BUSHING N5-9001-10x15, P1/155SW/W/P1 10470762 BUSHING N5-9001-16X15, P1/155SW/W/P1 10809292 HEXAGON SCREW N2-161-4x14, P1/155SW/W/P1 10809325 HEXAGON SCREW N2-161-5x10, P1/155SW/W/P1 6333934 PARALLEL PIN, P1/155SW/W/P1 6142299 SPRING, P1/155SW/W/P1 10700372 HEXAGON SCREW N2-109-6x25, P1/155SW/W/P1 10770184 SLOTTED SCREW N2-196-4-40x4.8, P1/155SW/W/P1 10770186 SLOTTED SCREW N2-196-4-40X6.3, P1/155SW/W/P1 10469823 BALL N54-1, P1/155SW/W/P1 10469820 BALL N54-1-3/16, P1/155SW/W/P1 10485178 WASHER N5-35- 12x16, P1/155SW/W/P1 10485182 WASHER N5-35-14x18, P1/155SW/W/P1 10485209 WASHER N5-35-35x45, P1/155SW/W/P1 10480224 SLOTTED SCREW N2-117-3X10, P1/155SW/W/P1 10809504 HEXAGON SCREW N2-161- 10x65, P1/155SW/W/P1 10809507 HEXAGON SCREW N2- 161-10X80, P1/155SW/W/P1 10809459 HEXAGON SCREW N2-161-8x40, P1/155SW/W/P1 10809455 HEXAGON SCREW N2-161-8x30, P1/155SW/W/P1 10809341 HEXAGON SCREW N2-161-5x50, P1/155SW/W/P1 10809364 HEXAGON SCREW N2-161-6X10, P1/155SW/W/P1 10809376 HEXAGON SCREW N2-161-6x35, P1/155SW/W/P1 10809287 HEXAGON SCREW N2-161-4x8, P1/155SW/W/P1 10809546 HEXAGON SCREW N2-161-12x70, P1/155SW/W/P1 10809541 HEXAGON SOCKET SCREW N2-161-12x46, P1/155SW/W/P1 10809632 HEXAGON SCREW N2-161-16x60, P1/155SW/W/P1 Bid Details 3/86
Iocl- Panipat Refinery
Indian Army
Dicyclomine HCI 20 mg Inj, Hyoscine Bromide Inj 20 mg per ml 1 ml, Atracurium 10 mg per ml 2 point 5 ml Inj, Glycopyrrolate 0 point 2 mg per ml 1 ml Inj, Neostigmine 0 point 5 mg 1 ml Inj, Succinylchloline Chloride 50 mg per ml 2 ml Inj, Tab Calcium Acetate 500 mg, Erythropoietin Recombinant Human 4000 IU, Mycophenolate Sodium 360 mg Tab, Acyclovir Ophth Ointment 3 percent w by w in 5 gm tube, Ciprofloxacin HCL 0 point 3 percent Tube of 5 gm, Gentamicin sulphate 0point3 perc w by v gentamicin base with Hydrocortisone acetate IP 1 perc w by v eye and ear drops bott of 5 ml, Moxifloxacin 0point5 percent preservative free Eye drops, Ketorolac Tromethamine 0point4 percent Eye drops, Brimonidine Tartrate 0point2 percent Eye drops, Travoprost 0point 004 percent Bott of 2point5 ml Eye drops, Latanoprost 0point 005 percent with 0 point 5 percent Timolol e per d bott of 2point5 ml, Carboxy Mrthyl Cellulose CMC 1 percent Gel Bid Number ( ) : GEM/2025/B/6051705 Dated : 15-03-2025 Bid Document 1/19
Sarva Shiksha Abhiyan (ssa)
All India Institute Of Medical Sciences (aiims)
Bharat Earth Movers Limited (beml)
125TF03008, 125TF03016, 125EH02493, 125EH02509, 125TF03008-1, 125TF03016-1
Armoured Vehicles Nigam Limited
FILE, TRIANGULAR ASSY/54.28. 25CB-1BCB, LONG CABLE FOR MOUNTING OF TRACKS ASSY/34.28. 179CB, SMALL ROD FOR KNOCKING OUT TRACK PINS/155.28. 1622, NAIL P1X16
Bharat Heavy Electricals Limited (bhel)
Nuclear Power Corporation Of India Limited
Switch Fuse Unit (Q3) MSE Exemption for Years of Experience and Turnover No Startup Exemption for Years of Experience and Turnover No Document required from seller OEM Authorization Certificate, Additional Doc 1 (Requested in ATC), Additional Doc 2 (Requested in ATC), Additional Doc 3 (Requested in ATC), Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer Do you want to show documents uploaded by bidders to all bidders participated in bid? No Bid to RA enabled No Type of Bid Two Packet Bid Primary product category Switch Fuse Unit Time allowed for Technical Clarifications during technical evaluation 7 Days Bid Number ( ) : GEM/2025/B/6015521 Dated : 15-03-2025 Bid Document 1/27 Inspection Required (By Empanelled Inspection Authority/Agencies pre- registered with GeM) No Evaluation Method Item wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank State Bank of India Schedule 1 EMD Amount (In INR) 10272 Schedule 2 EMD Amount (In INR) 10800 Schedule 3 EMD Amount (In INR) 17976 Schedule 4 EMD Amount (In INR) 16264 Schedule 5 EMD Amount (In INR) 2650 ePBG Detail Advisory Bank State Bank of India ePBG Percentage(%) (%) 5.00 Duration of ePBG required (Months) ( ) . 18 (a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b). The EMD Amount will be applicable for each schedule/group selected during Bid creation. (c). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable., Beneficiary : SITE DIRECTOR NUCLEAR POWER CORPORATION OF INDIA LIMITED, RAWATBHATA RAJASTHAN SITE, PO : ANUSHAKTI, Via-KOTA, RAJASTHAN-323 303 (Site Director) 2/27 MII Purchase Preference MII Purchase Preference Yes MSE Purchase Preference MSE Purchase Preference Yes 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference, the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services, the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy, such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order, 2012 and Public Procurement (Preference to Make in India) Order, 2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over, Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. Evaluation Method ( Item Wise Evaluation Method ) Contract will be awarded schedulewise and the determination of L1 will be done separately for each schedule. The details of item-consignee combination covered under each schedule are as under: 3/27 Evaluation Schedules Item/Category Quantity Schedule 1 Switch Fuse Unit 100 Schedule 2 Switch Fuse Unit 60 Schedule 3 Switch Fuse Unit 60 Schedule 4 Switch Fuse Unit 40 Schedule 5 Switch Fuse Unit 50 Switch Fuse Unit ( 100 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) RATINGS Rated operational Voltage (in Volt) 415 Rated frequency (in Hz) 50 Number of Pole 3 Pole and Neutral Current rating (in Ampere) 63 Rated Insulation voltge (in Volt) 690 Rated impulse withstand voltage (in KV) 8 Rated short circuit breking capacity, Minimum (in KA, r.m.s.) 80 GENERIC Whether product ISI Marked (Select 2 for ISI Marked product, Select 1 for Non ISI Marked product 2, 1 Or higher Switch Fue Unit contains Enclosure with door, Fuse units- Rewirable, Terminals, Contactors, Operating handle, Fuse units with fuse, Handle/Shaft: Telescopic shaft for depth adjustment, Pad locking, Auxiliary contact: 1C/O, Auxiliary Contact: 1NO+1NC, Mounting: DIN RAIL Bolted, Phase Barrier, Terminal shroud, Provided with external and one internal earthing termination, Separate neutral link with provision of 16 sq.mm lug termination with bolts, Phase separating barrier, Corner shields for protection, Hinge type front door, Top and bottom having removable gland plates of 3 mm thick, Wall mounting structure with bolts and nuts, Gasket Neoprene Rubber Utilisation category AC-23A 4/27 Warranty (in Years) 1 - 5 CONSTRUCTION Material of enclosure CRCA Sheet, 2 mm thick, Heavy duty sheet steel enclosed and fully shrouded and interlocked Degree of protection IP54, IP55, IP20 Mechanical Endurance, Minimum (in No.of cycles) 10000 Fixing accessories for mounting of enclolsures Yes, No FUSE UNIT Type of fuse Rewirable Porcelain Fuse units, Fuse Unit-Cylindrical . DIN fuse-link, HRC Fuse Link Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Switch Fuse Unit ( 100 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) MAKE & MODEL L&T- FN TPN SFU BIDDER SHALL CONFIRM THAT WHETHER IT IS OEM OR AUTHORIZED DEALER MENTION OEM OR AUTHORIZED DEALER IF, BIDDER IS AUTHORIZED DEALER THAN AUTHORIZED DEALERSHIP CERTIFCATE IS ATTACHED. YES TERMINAL SHROUD AND PHASE BARRIER IS PRESENT YES, BOTH TERMINAL SHROUD AND PHASE BARRIER SHOULD BE INCLUDED IN SUPPLY ENCLOSURE ENCLOSURE BOX NOT REQUIRED * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 5/27 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 100 100 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Switch Fuse Unit ( 60 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) RATINGS Rated operational Voltage (in Volt) 415 Rated frequency (in Hz) 50 Number of Pole 3 Pole and Neutral Current rating (in Ampere) 160 Rated Insulation voltge (in Volt) 440, 500, 630, 660, 690 Rated impulse withstand voltage (in KV) 3, 4, 6, 8, 12 Rated short circuit breking capacity, Minimum (in KA, r.m.s.) 3, 7, 10, 80 GENERIC Whether product ISI Marked (Select 2 for ISI Marked product, Select 1 for Non ISI Marked product 2, 1 Or higher Switch Fue Unit contains Enclosure with door, Fuse units- Rewirable, Terminals, Contactors, Operating handle, Fuse units with fuse, Handle/Shaft: Telescopic shaft for depth adjustment, Pad locking, Auxiliary contact: 1C/O, Auxiliary Contact: 1NO+1NC, Mounting: DIN RAIL Bolted, Phase Barrier, Terminal shroud, Provided with external and one internal earthing termination, Separate neutral link with provision of 16 sq.mm lug termination with bolts, Phase separating barrier, Corner shields for protection, Hinge type front door, Top and bottom having removable gland plates of 3 mm thick, Wall mounting structure with bolts and nuts, Gasket Neoprene Rubber 6/27 Utilisation category AC-22A, AC-23A Warranty (in Years) 1 - 5 CONSTRUCTION Material of enclosure CRCA Sheet, 2 mm thick, Heavy duty sheet steel enclosed and fully shrouded and interlocked Degree of protection IP54, IP55, IP20 Mechanical Endurance, Minimum (in No.of cycles) 10000 Fixing accessories for mounting of enclolsures Yes, No FUSE UNIT Type of fuse HRC Fuse Link Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Switch Fuse Unit ( 60 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) MAKE & MODEL L&T- FN TPN SFU BIDDER SHALL CONFIRM THAT WHETHER IT IS OEM OR AUTHORIZED DEALER. IF, BIDDER IS AUTHORIZED DEALER THAN AUTHORIZED DEALERSHIP CERTIFICATE IS ATTACHED MENTION OEM OR AUTHORIZED DEALER YES Rated impulse withstand voltage (in KV) 8 TERMINAL SHROUD AND PHASE BARRIER IS PRESENT YES, BOTH TERMINAL SHROUD AND PHASE BARRIER SHOULD BE INCLUDED IN SUPPLY. ENCLOUSRE ENCLOSURE BOX NOT REQUIRED * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 7/27 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 60 100 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Switch Fuse Unit ( 60 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) RATINGS Rated operational Voltage (in Volt) 240, 415 Rated frequency (in Hz) 50 Number of Pole 3 Pole and Neutral Current rating (in Ampere) 250 Rated Insulation voltge (in Volt) 440, 500, 630, 660, 690 Rated impulse withstand voltage (in KV) 3, 4, 6, 8, 12 Rated short circuit breking capacity, Minimum (in KA, r.m.s.) 3, 7, 10, 80 GENERIC Whether product ISI Marked (Select 2 for ISI Marked product, Select 1 for Non ISI Marked product 2, 1 Or higher Switch Fue Unit contains Enclosure with door, Fuse units- Rewirable, Terminals, Contactors, Operating handle, Fuse units with fuse, Handle/Shaft: Telescopic shaft for depth adjustment, Pad locking, Auxiliary contact: 1C/O, Auxiliary Contact: 1NO+1NC, Mounting: DIN RAIL Bolted, Phase Barrier, Terminal shroud, Provided with external and one internal earthing termination, Separate neutral link with provision of 16 sq.mm lug termination with bolts, Phase separating barrier, Corner shields for protection, Hinge type front door, Top and bottom having removable gland plates of 3 mm thick, Wall mounting structure with bolts and nuts, Gasket Neoprene Rubber 8/27 Utilisation category AC-22A, AC-23A Warranty (in Years) 1 - 5 CONSTRUCTION Material of enclosure CRCA Sheet, 2 mm thick, Heavy duty sheet steel enclosed and fully shrouded and interlocked Degree of protection IP54, IP55, IP20 Mechanical Endurance, Minimum (in No.of cycles) 10000 Fixing accessories for mounting of enclolsures Yes, No FUSE UNIT Type of fuse HRC Fuse Link Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Switch Fuse Unit ( 60 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) MAKE & MODEL L&T-FN-TFN SFU BIDDER SHALL CONFIRM THAT WHETHER IT IS OEM OR AUTHORIZED DEALER. IF, BIDDER IS AUTHORIZED DEALER THAN AUTHORIZED DEALERSHIP CERTIFICATE IS ATTACHED MENTION OEM OR AUTHORIZED DEALER YES Rated impulse withstand voltage (in KV) Rated operational Voltage (in Volt) 8 415 TERMINAL SHROUD AND PHASE BARRIER IS PRESENT YES, BOTH TERMINAL SHROUD AND PHASE BARRIER SHOULD BE INCLUDED IN SUPPLY ENCLOSURE ENCLOSURE BOX NOT REQUIRED * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 9/27 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 60 100 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Switch Fuse Unit ( 40 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) RATINGS Rated operational Voltage (in Volt) 415 Rated frequency (in Hz) 50 Number of Pole 1 Pole and Neutral, 2 Pole, 3 Pole and Neutral, 4 Pole Current rating (in Ampere) 400 Rated Insulation voltge (in Volt) 440, 500, 630, 660, 690 Rated impulse withstand voltage (in KV) 3, 4, 6, 8, 12 Rated short circuit breking capacity, Minimum (in KA, r.m.s.) 3, 7, 10, 80 GENERIC Whether product ISI Marked (Select 2 for ISI Marked product, Select 1 for Non ISI Marked product 2, 1 Or higher Switch Fue Unit contains Enclosure with door, Fuse units- Rewirable, Terminals, Contactors, Operating handle, Fuse units with fuse, Handle/Shaft: Telescopic shaft for depth adjustment, Pad locking, Auxiliary contact: 1C/O, Auxiliary Contact: 1NO+1NC, Mounting: DIN RAIL Bolted, Phase Barrier, Terminal shroud, Provided with external and one internal earthing termination, Separate neutral link with provision of 16 sq.mm lug termination with bolts, Phase separating barrier, Corner shields for protection, Hinge type front door, Top and bottom having removable gland plates of 3 mm thick, Wall mounting structure with bolts and nuts, Gasket Neoprene Rubber 10/27 Utilisation category AC-22A, AC-23A Warranty (in Years) 1 - 5 CONSTRUCTION Material of enclosure CRCA Sheet, 2 mm thick, Heavy duty sheet steel enclosed and fully shrouded and interlocked Degree of protection IP54, IP55, IP20 Mechanical Endurance, Minimum (in No.of cycles) 10000 Fixing accessories for mounting of enclolsures Yes, No FUSE UNIT Type of fuse Rewirable Porcelain Fuse units, Fuse Unit-Cylindrical . DIN fuse-link, HRC Fuse Link Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Switch Fuse Unit ( 40 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) MAKE & MODEL Number of Pole L&T-FN TPN SFU ONLY 3 POLE & NEUTRAL REQUIRED BIDDER SHALL CONFIRM THAT WHETHER IT IS OEM OR AUTHORIZED DEALER MENTION OEM OR AUTHORIZED DEALER IF BIDDER IS AUTHORIZED DEALER THAN AUTHORIZED DEALERSHIP CERTIFICATE IS ATTACHED Rated impulse withstand voltage (in KV) YES ONLY 8 KV REQUIRED TERMINAL SHROUD AND PHASE BARRIER IS PRESENT YES, BOTH TERMINAL SHROUD AND PHASE BARRIER SHOULD BE INCLUDED IN SUPPLY. ENCLOSURE ENCLOSURE BOX NOT REQUIRED * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 11/27 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 40 100 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Switch Fuse Unit ( 50 pieces ) (Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively 1 2 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) RATINGS Rated operational Voltage (in Volt) 415 Rated frequency (in Hz) 50 Number of Pole 3 Pole and Neutral Current rating (in Ampere) 32 Rated Insulation voltge (in Volt) 440, 500, 630, 660, 690 Rated impulse withstand voltage (in KV) 8 Rated short circuit breking capacity, Minimum (in KA, r.m.s.) 3, 7, 10, 80 GENERIC Whether product ISI Marked (Select 2 for ISI Marked product, Select 1 for Non ISI Marked product 2, 1 Or higher Switch Fue Unit contains Enclosure with door, Fuse units- Rewirable, Terminals, Contactors, Operating handle, Fuse units with fuse, Handle/Shaft: Telescopic shaft for depth adjustment, Pad locking, Auxiliary contact: 1C/O, Auxiliary Contact: 1NO+1NC, Mounting: DIN RAIL Bolted, Phase Barrier, Terminal shroud, Provided with external and one internal earthing termination, Separate neutral link with provision of 16 sq.mm lug termination with bolts, Phase separating barrier, Corner shields for protection, Hinge type front door, Top and bottom having removable gland plates of 3 mm thick, Wall mounting structure with bolts and nuts, Gasket Neoprene Rubber 12/27 Utilisation category AC-23A Warranty (in Years) 1 - 5 CONSTRUCTION Material of enclosure CRCA Sheet, 2 mm thick, Heavy duty sheet steel enclosed and fully shrouded and interlocked Degree of protection IP54, IP55, IP20 Mechanical Endurance, Minimum (in No.of cycles) 10000 Fixing accessories for mounting of enclolsures Yes, No FUSE UNIT Type of fuse Rewirable Porcelain Fuse units, Fuse Unit-Cylindrical . DIN fuse-link, HRC Fuse Link Specification Specification Name Bid Requirement (Allowed Values) Additional Specification Parameters - Switch Fuse Unit ( 50 pieces ) Specification Parameter Name Bid Requirement (Allowed Values) MAKE & MODEL L&T -FN TPN SFU BIDDER SHALL CONFIRM THAT WHETHER IT IS OEM OR AUTHORIZED DEALER MENTION OEM OR AUTHORIZED DEALER IF, BIDDER IS AUTHORIZED DEALER THAN AUTHORIZED DEALERSHIP CERTIFICATE IS ATTACHED YES TERMINAL SHROUD AND PHASE BARRIER IS PRESENT YES, BOTH TERMINAL SHROUD AND PHASE BARRIER SHOULD BE INCLUDED IN SUPPLY. ENCLOSURE ENCLOSURE BOX NOT REQUIRED * Bidders offering must also comply with the additional specification parameters mentioned above. Consignees/Reporting Officer and Quantity S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days 13/27 1 Gyan Mal Khatik 323303, Contracts & Material Management, NPCIL, Rawatbhata Rajasthan Site, Anushakti Via-Kota (Rajasthan) Phone No. 01475-242002, 242048 Which is about 60 Kms. away from Kota. 50 100 S.No. .. .. Consignee Reporting/Officer Address Quantity Delivery Days Buyer Added Bid Specific Terms and Conditions 1 . Generic OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity up to 25% of the contracted quantity during the currency of the contract at the contracted rates. The delivery period of quantity shall commence from the last date of original delivery order and in cases where option clause is exercised during the extended delivery period the additional time shall commence from the last date of extended delivery period. The additional delivery time shall be (Increased quantity ÷ Original quantity) × Original delivery period (in days), subject to minimum of 30 days. If the original delivery period is less than 30 days, the additional time equals the original delivery period. The Purchaser may extend this calculated delivery duration up to the original delivery period while exercising the option clause. Bidders must comply with these terms. 2 . Scope of Supply Scope of supply (Bid price to include all cost components) : Only supply of Goods 3 . Generic Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates (whichever is lower), subject to the maximum of quoted GST %. 4 . Generic 1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of buyer. 2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior written consent of buyer. 3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally liable and responsible to buyer together with the assignee/sub-contractor, for and in respect of the due performance of the Contract and the Sellers obligations there under. 5 . Buyer Added Bid Specific ATC Buyer Added text based ATC clauses (A) Additional Specification Parameters, if any : Additional Specification Parameters as stipulated in the Bid Document must be complied by the Bidder/Seller and supply may be made accordingly otherwise material will be liable for rejection. 14/27 (B) Clarifications/documents submitted by the bidder : (i) Clarifications/documents submitted during the representation time shall not be considered for evaluation and hence any clarifications/documents asked fro m the bidder may be submitted before evaluation of bid only. (ii) The Representation window is opened 4/5 days from the date of publishing o f bi d for seeking clarification towards technical/commercial in the existing bid, failing which buyer shall not be responsible for giving response under the Bid. (iii) For post contract related clarification/queries bidder can contact buyer at b uyer ID : [email protected] ( contact No. 9413356554 ) (C) Documents related to Payment The seller shall submit Original invoice clearly marked for ‘Bill to’ and ‘Shipped t o’, Annexure-F (copy enclosed), Seller’s Bank details, E-invoice if applicable to s eller based on his turnover, Test certificate (if applicable) etc to the Paying Auth ority directly, immediately after dispatching material to the Consignee. As paym ent is to be released in a time bound manner, non-receipt of these document in time may lead to rejection of supplies.” (D) MSE Benefits Purchase preference will be given to MSEs as defined in Public Procurement Poli cy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders Notifications issued by concerned Ministry. Trades are excluded from the purvie w of Public Procurement Policy for Micro and Small Enterprises. Relevant docum entary evidence in this regard shall be uploaded along with the bid. If L-1 is not an MSE and MSE Seller(s) has/have quoted price within L-1+15% of margin of p urchase preference/price band defined in relevant policy, such Seller shall be gi ven opportunity to match L-1 price and contract will be awarded for 25% of total QUANTITY. Benefits of Public Procurement Policy shall be given to all eligible MSEs as stated under Point no.3 of FAQ dt. 25/03/2022, irrespective of p roduct categories and the category they are registered under viz. Manufacturin g or Service. (E) Following documents duly signed and sealed by the authorized representative of the Firm/Company shall invariably be submitted by the bidder(s) along with the bid for evaluation of the offer: 1) Certificate as per attached Annexure-M for compliance of ‘Make in India Orde r’ furnished by Original Equipment Manufacturer (OEM) may only be submitted as per GeM bid condition. (Additional Document No.1) 2) Annexure-‘F’ as per attached format for ‘Declaration Form for GST’. (Addition al Document No.2) 3) ‘Mandate Form’ at per attached format. (Additional Document No.3). 15/27 4) ‘Specifications Compliance Sheet’ to be filled by the bidder, if asked in the te nder. (Additional Document No.4) 5) In case of submission of EMD in the form of ePBG, DD, FDR/TDR other than o nline payment transaction mode i.e. IMPS/NEFT/RTGS, the original documents of EMD should reach at following address within 05 working days of bid opening as per Clause No. 4-xiii-(m) of GeM GTC, failing which the bid will be liable for rejec tion:- Nuclear Power Corporation of India Limited (A Government of India Enterprise) Contracts & Materials Management Wing Ground Floor, Rajasthan Parmanu Vijay Bhawan, Rawatbhata Rajasthan Site, PO Anushakti, Via-Kota, Rajasthan-323303 (F) Online Payment of EMD and e-PBG : ONLINE PAYMENT OPTION OF EMD (EARNEST MONEY DEPOSIT)/ePBG (PERFOR MANCE BANK GUARANTEE) :- BIDDERS CAN SUBMIT EMD/ePBG THROUGH SBI COLLECT PORTAL BEING OUR P REFERED MODE WHICH HAS FACILITY FOR EASY DEPOSITING AND REFUND OF E MD AND E-PBG. SBI collect facility can be accessed through the following manner :- Option 1 : Go to link https:/www.onlinesbi.sbi/sbicollect/icollecthome.htm?saralI D=-913530096 Option 2 : Visit SBI website -> SB Collect -> Select Category as PSU-> Filter ‘Sta te’ Rajasthan and Search for “ N P C I L 1 AND 2 ” Steps to be followed for making remittance:- · Click on the Payment Category and Select EMD (Earnest Money Deposit)/eP BG (Performance Bank Guarantee) option. · Enter the required details in the given format and review the details to ensur e accuracy and click on the Next button. · Choose from the different modes of payment such as Debit card, Credit Card, 16/27 internet banking, UPI etc., and make the payment. · Save/download the receipt generated for reference and upload a copy of rece ipt along with the bid in case of EMD. · Save/download the receipt generated for reference and a copy of receipt may be forwarded on Buyer’s e-mail ID in case of ePBG and a copy of the same may also be uploaded on GeM portal against the GeM Contract. (G) Undertaking/Compliance to Clause No. 29 of GeM GTC : Bidder is mandatorily required to submit an Undertaking as per attached Annex ure-D on Company’s Letter He ad along with offer, failing which, their offer will not be evaluated and rejected without asking any further clarification with regar d to the same. (H) Important Instructions to the Sellers : In the event of purchase order, following instructions shall be followed by the Se ller:- 1) Supply is to be made within stipulated delivery period as mentioned in the G eM Contract since Time is the essence of Contract. However, in case of exceptio nal circumstances as mentioned in GeM GTC, request for extension in delivery p eriod may be made by Seller on GeM portal. Simultaneously, an e-mail f or exte nsion in delivery period along with reason for delay in supply may be sent to e- mail ID of Buyer as mentioned in the Contract which will be reviewed by the Co mpetent Authority before issuing of the amendment on GeM portal and hence r epeated request on GeM portal for extension of delivery period ma y be avoided by the Seller till acceptance of the buyer since th e same gets auto cancelled by the system. 2) Invoice may be uploaded on GeM portal by the Seller immediately after dispa tch of material otherwise system will not allow the Seller to upload the invoice o n GeM portal after expiry of the delivery period as mentioned in the Contract. 3) Only Buyer GeM e-mail ID may be used by the Seller to send any communica tion with regard to GeM Contract, if required. (I) Right of Recourse under Civil Liability for Nuclear Damages Act 2010 & Rule 2011 thereof : Since requirement is for PHWR, NPCIL is the system designer and technology o wner, being responsible for safety design of such installations in the this tender, NPCIL shall assume the role of Supplier in accordance with the explanation of te rm “Supplier” given in Rule 24 of the CLND Rules, 2011 and in the context of se ction 17(a) and (b) of the CLND Act, 2010. 17/27 I.0 BANNING OF BUSINESS DEALINGS BY NPCIL/BUYER NPCIL reserves the right to initiate Banning as per NPCIL’s Banning of business dealings as mentioned below and are independent of actions under GeM’s IM (In cident Management) Policy. The words banning, blacklisting, de-registered, debarred, holiday, suspension of business etc., means the same. The words NPCIL, Corporation, Buyer etc., means the same. The words Contractor, Bidder, Seller, Service Provider etc., means the same. I.1 Grounds for Banning The business dealing with the Contractor/Bidder/Seller/Service Provider shall be liable for banning, on account of the reasons attributable to them, which shall in clude, but not limited to the following: I.1.1. Involvement in cartel formation during bidding. I.1.2. Baseless allegations by the bidder on NPCIL/Corporation/Buyer evaluation processes or officials. I.1.3. If any of the owner, proprietor or partner of the Contractor, is convicted by a court of law, during bidding process or currency of the contract, for offences i nvolving corrupt and fraudulent practices including misrepresentation of the fac ts, moral turpitude in relation to its business dealings with NPCIL. I.1.4. Malafide/unlawful acts/malpractices or improper conduct on part of Cont ractor based on the approved findings of the Investigation Agency. I.1.5. If the Contractor misuses the premises or facilities of the NPCIL forcefully o ccupies, tampers or damages the Company’s properties etc. or fails to vacate t he properties/land/complex within reasonable time limit as specified or even aft er receiving the notices from the department. I.1.6. Security concerns for the assets of the Corporation and State. I.1.7. Submission of bids that contain false information or falsified documents or the concealment of such information in the bids in order to influence the outco me of eligibility screening or/at any other stage of the public bidding and exec ution. I.1.8. Withdrawal of a bid or refusal to accept an award of contract with the NPC IL without justifiable cause, after being adjudged as the successful bidder. I.1.9. Supply of Counterfeit items Breach of Code of Integrity. I.1.10. Bidder shall not act in contravention of the codes which includes I.1.10.1 Prohibition of a. Making offer, solicitation or acceptance of bribe, reward or gift or any materia l benefit, either directly or indirectly, in exchange for an unfair advantage in the 18/27 procurement process or to otherwise influence the procurement process. b. Any omission or misrepresentation that may mislead or attempt to mislead s o that financial or other benefit may be obtained or an obligation avoided. c. Any conclusion, bid rigging or anticompetitive behavior that may impair the t ransparency, fairness and the progress of the procurement process. d. Improper use of information provided by the procuring entity to the bidder wi th an intent to gain unfair advantage in the procurement process or for persona l gain. e. Any financial or business transactions between the bidder and any official of t he procuring entity related to tender or execution process of contract; which ca n affect the decision of the procuring entity directly or indirectly. f. Any coercion or any threat to impair or harm, directly or indirectly, any party or its property to influence the procurement process. g. Obstruction of any investigation or auditing of a procurement process. h. Making false declaration or providing false information for participation in ten der process or to secure a contract; I.1.10.2 Disclosure of conflict of interest I.1.10.3 Disclosure by the bidder of any previous transgression made in respect of the provisions of above I.1.10.1 with any entity in any country during the last three years or of being de barred/banned by any other procuring entity. I.2 Show Cause Notice I.2.1 NPCIL will issue Show Cause Notice to the Contractor on noticing/receipt of a complaint of any irregularities and/or misconduct and/or unethical practice a s mentioned in clause no. 1.1. I.2.2 Upon receipt of Show cause notice, the Contractor is required to submit th e reply to Show Cause Notice within 30 days of its receipt and no extension shal l be given without justifiable reasons. The Contractor shall also be given an opp ortunity for oral hearing to present the case in person to NPCIL and the date of Oral Hearing will be indicated in the Show Cause Notice. Only the regular emplo yees of Contractor will be permitted to represent the Contractor during the Oral hearing, and no outsider shall be allowed to represent the Contractor on their b ehalf. I.3 Period of Banning The period of banning shall be for a period of not exceeding 2 (two) years and n ot less than 6 (six) months as considered appropriate by NPCIL. I.4 Effect of Banning of Business Dealings by NPCIL In case NPCIL has banned the business dealing with the bidder/contractor, the f 19/27 ollowing shall be the consequences on issuance of the order of banning of busin ess dealings with the bidder/contractor: I.4.1 No Contract of any kind whatsoever shall be placed to such banned firms including its allied firms after the issue of Banning Order by NPCIL. The Contract or including their allied firms shall not be allowed to participate in any tender en quiry till completion of Banning period. If the Contractor has already participate d in tender process and the price bids are not opened, his techno-commercial bi d will be rejected and price bid will be kept unopened. In cases, where the price bids of Contractor have been opened prior to the order of banning, such bids sh all be rejected. However, incase such banned Contractor is Lowest (L1), next lo west firm shall be considered as L1. Bid Security, if any, submitted by such ban ned Contractors shall be returned to the bidder. I.4.2 Contractors shall not be permitted to participate in any business process in any form or entity i.e., as an Associate/Collaborator/Joint Venture Partner/Conso rtium Partner of the Main Contractor even if the banning order is passed subseq uent to opening of Part-I bids. I.4.3 Contractor shall not be allowed to participate as Sub-Vendor/sub-contracto r in the tenders for contracts for works, service, supplies. I.4.4 Even if, the banned Contractor is an approved Sub-vendor under any Contr act for such equipment/component/service, the Main Contractor shall not be per mitted to place Work order/Purchase order/Service Contract on the banned Con tractor as a sub-vendor after the date of banning even though the name of the p arty has been approved as a sub-vendor prior to the order of banning. I.4.5 The completion certificate issued to the contractor shall make a mention r egarding banning during execution of the contract. I.4.6 Banned bidders shall not be permitted to submit their bid. The bid submitt ed by the banned bidder shall be summarily rejected. I.4.7 Contracts concluded before the issue of the banning order shall, not be aff ected by the banning order. I.4.8 Banning shall automatically be extended to all Allied firms of the Contracto r. In case of Joint venture/Consortium is banned all partners will also stand deb arred for the period specified in the Banning Order. The names of all partners s hould be clearly specified in the “Banning order”. I.4.9 Banning in any manner does not impact any other contractual or other leg al rights of NPCIL. I.4.10 Banning under the provisions of Banning of Business Dealings of NPCIL is applicable only for NPCIL. I.5 Definition of Allied Firm : Allied Firm means all concerns which come within the sphere of effective influence of the banned firm. In determining this, the following factors shall be t aken into consideration: 20/27 a. Whether the management is common; b. Majority interest in the management is held by the partners or directors of ba nned/suspended firm; c. Substantial or majority shares are owned by the banned/suspended firm and by virtue of this it has a controlling voice; d. Directly or indirectly controls, or is controlled by or is under common control with another bidder; e. All successor firms will also be considered allied firms. (J) END USE CETIFICATE/VERIFICATION In case applicable, Bidder shall ensure that items to be imported to India do not have US origin components above the de minims level. End use verification shal l not be agreed by NPCIL in case of imports under any circumstances. Further, t he bidder/contractor shall make attempts to import raw materials/component s, if necessary, without insisting for “End User Certificate”. (K) DELIVERY SCHEDULE Date of delivery of the Stores stipulated in the Contract, shall be the essence of the Contract and delivery of Stores must be completed by the dates specified th erein. Unless otherwise agreed, the Contract shall come into force from the dat e of issue of priced Purchase Order (Effective Date) and accordingly contractual delivery period shall be reckoned from that date for the purpose of fixing Contra ctual Delivery Date (CDD). (L) PRICE BREAK-UP In case of two part tenders, the Bidder shall take special care not to mix up any price details required to be submitted against Part-II (Price bid) with Part-I (Tech nical & Commercial bid except price) and vice versa. Any violation of the above shall lead to summarily rejection of bid as being non-responsive. Wherever asked for, the bidder shall be required to submit complete break-up o f “Total Price” as per prescribed “Price Bid Break-up/SOQR” format in GeM Porta l. In such case, the non-submission of the “Price Bid Break-up/SOQR” or submiss ion of irrelevant document or submission of No/Nil value against all items of the “Price Bid Break-up/SOQR” shall lead to rejection of such bids. However, in case No/Nil rate is quoted against some of the item(s), the price of such item(s) shall be deemed to be zero. Addition/deletion/modification of any item in the prescribed “Price Bid Break-up SOQR” format is not acceptable unless authorized by Buyer and accordingly, bi ds with any unauthorized addition/deletion/modification in the prescribed “Price 21/27 Bid Break-up/SOQR” format shall be summarily rejected. Calculations for Price Bid Evaluation for Single Packet/Part Bids, Part-II (price bi d) evaluation for Two Packet/Part Bids and Contract Order Placement: For Price Bid Evaluation as per price evaluation criteria as well as for award of c ontract, “Total Price” quoted by Bidder in GeM Portal shall only be considered. T he same “Total Price” shall only be considered for other purposes (i.e., negotiati on, price matching in case of MSE/MII purchase preference/
Hindustan Aeronautics Limited (hal)
Indian Army
Pre Heparinized Syringe with Lithium Heparin 3ml with Safety Needle, Pre Heparinized Syringe with Lithium Heparin 3ml without Safety Needle, Ployurethane Tapered Arterial Catheter with Hydrophillic Coating 20G 5cm Length, Consumables for HHFNC Device Breathing Circuit, Consumables for HHFNC Device Nasal Cannula, Trunat Dendue Plus Chikungunya PCR Combo TestWhich Consist of Trunat Dengue plus Chikungunya, Polytetraflorethylene PTFE CV6 70 to 80cm 3 oblique 8 Circle Round Body Bouble Needle 9 to 17mm, Polytetraflorethylene PTFE CV7 70 to 80cm 3 oblique 8 Circle Round Body Bouble Needle 9 to 17mm Bid Number ( ) : GEM/2025/B/6009682 Dated : 15-03-2025 Bid Document 1/16
Bharat Petroleum Corporation Ltd
G-6 Commercial Meter, G-10 Commercial Meter, G-16 Commercial Meter, G-25 Commercial Meter, 500mbar 25 SCMH commercial regulator, 500mbar 40 SCMH commercial regulator, 500mbar 65 SCMH commercial regulator
Indian Army
Ung Capsacain Gel Tube of 20gm, Tab Fexofenadine 120mg, Tab Glucosamine 250mg plus Chondroitin sulphate 200mg, Tab Leflunomide 20mg, Tab Leflunomide 10mg, Tab Methyl Prednisolone 4mg, Tab Serratiopeptidase 5mg, Tab Sulphamethoxazole 400mg plus Trimethoprim 80mg, Tab Nevirapine 200mg, Tab Effavirenz 600mg, Tab Zidovudine 300mg plus Lamivudine 150mg plus Nevirapine 200mg, Tab Nitrofurantoin 100mg, Tab Dolutegravir 50mg, Tab Thyroxine sodium 75mcg, Tab Paroxetine 25mg, Tab Ranolazine 500mg, Hepatitis B Vaccine 10ml, Corn Cap 40 percent Sallicylic Acid, Alcaftadine Eye Drops 0 point 25 percent wv 2 point 5mg ml, Bimatoprost 0 point 03 percent plus Timolol 0 point 5 percent eye drop 5 ml, Gatifloxacin 0 point 3 percent plus Dexamathasone 0 point 5 percent Eye drop 5 ml, Hydroxypropyl Methyl Cellulose Eye drop 10 ml Preservative free, Hydroxypropyl Methyl Cellulose ophthalmic Gel Preservative free, E D Hydroxypropyl methyl cellulose 0 point 3 percent wv Eye drop 10 ml, E D Moxifloxacin Hcl 0 point 3 percent, Moxifloxacin 0 point 5 percent Ung 5 gm, Proparacaine 0 point 5 percent Eye drops 5 ml, E D Sodium Hyaluronate 1 percent 10mg ml, Nepafenac 0 point 1 percent w v with carbomer 970 P eye drop with drop Tainer system USFDA approved Eye drop 5 ml, Salbutamol 100mcg pack of 200 metered dose MDI, Rotacap Foracort 200mg, Rotacap Foracort 400mg, Rotacap Levosalbutamol 100mcg, Rotacap Tiotropium Bromide 18 mcg, Rotacap Formoterol 6mcg and Budesonide 200 mcg rotocaps Bott of 30, Inj Darbapoietin 100mcg, Evening Primrose Oil 500 mg Cap, Venlafexine 75mg Cap, Vitamin E 400mg Cap, Cap Multivitamin plus Zinc plus Biotin 10mg, Cap Silodosin 8 mg plus Dutesteride 0 point 5 mg, Docosahexanoic Acid 120mg plus Eicosapentanoic Acid 180mg Omega 3 fatty Acid Cap, Lot Betamethasone dipropionate 0 point 05 percent Zinc sulphate Bott of 50ml, Cream Silver Sulphadiazine 1 percent Sterilic Tube of 25 g, Calamine lotion 90 percent m Sulphur ppt 10 percent lot of 100 ml, Clobetasole 0 point 5 percent Salycyic acid 3 point 5 percent Lotion 30ml, Luliconazole 1 percent Ung 30gm, Urea 10 percent Lactic acid 10 percent Propylene glycol 10 percent Liq paraffin 10 percent cream 90 gm, White Soft Parrafin 13 point 2 percent Liquid Paraffin 10 point 2 percent cream 50gm, Ung Acyclovir Skin cream Tube of 5gm 10gm Bid Details 2/41
Nmdc Limited
1700010038, RECESS MOUNTED LED LIGHT FITTING, 1700013604, 1 X 4 LED FLAT TUBE LIGHT FITTING, 1700009197, LED 400WATT FLOOD LIGHT FITTING, 1700002302, LED BOLLARD FITTINGS
Bhilai Steel Plant
51010101250120, 51010101250119, 51010101250093, 51010101250112, 51010101250118, 51010101250117
Indian Army
specification as per RFP, Distribution box and all other specification as per RFP, MCB SPN and all other specification as per RFP, MCB SP and all other specification as per RFP, PVC tape and all other specification as per RFP, Cable PVC insulated and all other specification as per RFP, PVC casing capping and all other specification as per RFP, Switch Piano and all other specification as per RFP, LED Tube light fittings and all other specification as per RFP, Screw full thread and all other specification as per RFP, PVC switch board and all other specification as per RFP, PVC L bend and T junction and all other specification as per RFP, Service bracket and all other specification as per RFP, Cable PVC insulated electric cable and all other specification as per RFP, Ceiling rose and all other specification as per RFP, Plastic Body fresh air fan and all other specification as per RFP, LED Bulk head fittings and all other specification as per RFP, PVC flexible wire and all other specification as per RFP, PVC flexible conduit pipe and all other specification as per RFP, PVC round square block and all other specification as per RFP, Earthing Plate and all other specification as per RFP, CI earth pit cover and all other specification as per RFP, Funnel fitted and all other specification as per RFP, GI Wire and all other specification as per RFP, Charcoal and all other specification as per RFP, Salt normal and all other specification as per RFP, Testing point terminal block and all other specification as per RFP, Cement and all other specification as per RFP, Coarse Sand free from vegetation and all other specification as per RFP, Coarse aggregate and all other specification as per RFP, Coarse Aggregate and all other specification as per RFP, Stone for RR messonry and all other specification as per RFP, Water Proofing Compound and all other specification as per RFP, Mild Steel Bars and all other specification as per RFP, MS Binding wire and all other specification as per RFP, Wooden plank and all other specification as per RFP, Nails and all other specification as per RFP, Bricks and all other specification as per RFP, Brick bats and all other specification as per RFP, PVC Vent Pipe and all other specification as per RFP, PVC Cowl and all other specification as per RFP, PVC Socket and all other specification as per RFP, Quick Setting Compund and all other specification as per RFP
Hindustan Petroleum Corporation Ltd
Please refer detailed line description of Item No 10, Please refer detailed line description of Item No 20, Please refer detailed line description of Item No 30, Please refer detailed line description of Item No 40, Please refer detailed line description of Item No 50, Please refer detailed line description of Item No 60
Bharat Heavy Electricals Limited (bhel)
TC9758090577, Erection services for MC TC9758090577, TC9758090127, Erection services for MC TC9758090127, TC9758090135, Erection services for MC TC9758090135, TC9758090526, Erection service for MC TC9758090526
Bharat Heavy Electricals Limited (bhel)
Indian Air Force
STEEL SHEET 2.5MM, STEEL SHEET 3MM, STEEL SHEET 1.5MM, STEEL SHEET 1MM THICK, STEEL SHEET 2MM, STEEL SHEET 0.5MM THICK, STEEL SHEET 0.6MM THICK
Indian Air Force
D-16AT-2AS ALUMINIUM SHEET 2MM THICK, D16AM-0.8-AS ALUMINIUM SHEET 0.8MM, D16AT-1.5-AS AL SHEET 1.5MM, D16AM14AS AL SHEET 1.4MM THICK, D16AT-0.5 ALUMINIUM SHEET 0.5MM
Yantra India Limited
SIMOTICS SYNCHRONOUS MOTOR, PN= 3.3 KW, UDC= 600V, TYPE- 1FK7083-5AF71-1EH3, MAKE-SIEMENS OR ITS EQUIV, SIMOTICS SYNCHRONOUS MOTOR, PN= 2.3 KW, UDC= 600V, TYPE- 1FK7063-5AF71-1EG3, MAKE-SIEMENS OR ITS EQUIV, SIMODRIVE 611 UNIVERSAL E HR 2 AXIS CONTROL LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1VPP ABSOLUTE VAL, SIGNAL CABLE PRE ASSEMBLED, (ABSOLUTE ENCODER IN MOTOR), TYPE- 6FX5002-2EQ10- 1AF0 MAKE-SIEMENS OR IT, SIGNAL CABLE PRE ASSEMBLED (ENCODER VOLTAGE SIGNAL), TYPE- 6FX5002-2CA31-1AF0 MAKE-SIEMENS OR ITS EQ, POWER CABLE PRE ASSEMBLED, TYPE- 6FX5002-5CA01-1AF0 MAKE-SIEMENS OR ITS EQUIVALENT SUBJECT SUBJECT T, ABSOLUTE ENCODER EQN 1325.020-2048. G10 ID NR. 538234-01, MAKE- HEIDENHAIN OR ITS EQUIVALENT SUBJECT T
Northern Coalfields Limited
HOSE; SUCTN, RBR, 2ARMRD, 12IN, 3.5M, FL, 25BAR, HOSE; SUCTN, RBR, 2ARMRD, 12IN, 5M, FL, 25BAR
Yantra India Limited
Custom Bid for Services - REPAIRING OF PCU 502 BC TYPE 6FC5210ODF312AB0 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF LT MODULE 2X25A TYPE 6S1N11231AB000BA2 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF LT MODULE 2X25A TYPE 6SN11231AB00 0BA1 MAKE SIEMENS, Custom Bid for Services - REPARING OF COMBI POWER MODULE TYPE6SL31113VE22 0HA1 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF 8828D CNC SYSTEM PPU 2803 TYPE 6FC53708AA300AA1 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF OERATOR PANEL OP15A TYPE 6FC52030AF050AB1 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF ER MODULE 1621 KW TYPE 6N11451BA010BA1 MAKE SIEMENS, Custom Bid for Services - REPAIRING OF AC SERVO MOTOR TYPE 1FK70635AF711EG3 MAKE SIEMENS Similar Category Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service Repair and Overhauling Service
Indo Tibetan Border Police (itbp)
Custom Bid for Services - Hiring of Porters for Transportation of Govt Store during SRP and LRP, Custom Bid for Services - Hiring of porters for Opening of New BOPs And Transportation of FRP huts for Construction of NEW BOPS Similar Category Manpower Outsourcing Services - Minimum wage Manpower Outsourcing Services - Minimum wage
Armoured Vehicles Nigam Limited
TAP - PM M10X1.5-6H RIGHT HAND POSITIVE SPIRAL FLUTE FOR BLIND HOLE COATED (HSS), TAP PM HSSE M6X1-6H SPIRAL FLUTE FORM C MULTILAYER COATED, TAP PM HSSE M8X1-6H SPIRAL FLUTE FORM C MULTILAYER COATED, TAP PM HSSE M8X1.25-6H SPIRAL FLUTE FORM C MULTILAYER COATING, TAP PM HSSE M12X1.25-6H SPIRAL FLUTE FORM C MULTILAYER COATING
Indian Army
Red Chilly Sabut, Haldi Sabut, Dhaniya Sabut, Kali Mirchi, Mustard Whole Rai, Tej Patta, Methi, Jeera, Sambar Masala point 100 kg, Garam Masala point 100 kg, Hing point 050 kg, Red chilly powder, Haldi Powder, Dhaniya Powder, Badi Elachi, Ajwain, Pickle 1 kg, Vinegar point 750 kg, Kasturi Methi point 500 kg, Biryani Masala point 100 kg, Chilli Souce 1 kg
Directorate Of Purchase And Stores
SUPPLY OF VACUUM PUMP BODY AS PER DRAWING NUMBER A-1-S-516, ASM-CLASS-30
Indian Air Force
STEEL SHEET 1.2MM THICK 30 KHGSA-1.2, STEEL SHEET 3.5MM DIA 30KHGSA-3.5-SS, STEEL SHEET 1.5MM THICK 30KHGSA-1.5-SS, STEEL SHEET 1.6MM THICK 30KHGSA-1.6- SS, TEEL SHEET 0.5MM 0KHGSA-0.5-SS, STEEL SHEET 1MM 30KHGSA-1-SS, STEEL SHEET 2.5MM THICK 30KHGSA-2.5- SS
Yantra India Limited
FORGED ROUND TO SPECN. IS: 3748-1990, TO DESIGN. T105 CR5, IN ANNEALED PROOF MACHINED AND ULTRASONICAL
Nlc India Limited
Indian Army
POST LARYNGECTOMY VOICE PROSTHESIS INHEAL, PROVOX VOICE PROSTHESIS 4.5 MM, TITANIUM TEFLON STAPES PISTON, TITANIUM STAPIS PROSTHESIS 0.4 X 4.25 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS 0.4 X 4.50 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS 0.4 X 4.75 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS 0.6 X 4.25 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS 0.6 X 4.50 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS 0.6 X 4.75 MM SOFT CLIP, TITANIUM STAPIS PROSTHESIS FOR MALEOVESTIBUL OPEXY 0.6 X 6.00 MM SOFT CLIP, TITANIUM PROSTHESIS AERIAL TOTAL 5.00 MM, TITANIUM PROSTHESIS BELL PARTIAL 2.50 X 1.50 MM, TITANIUM PROSTHESIS BELL PARTIAL 2.75 X 1.75 MM, 100 MM STAPLER WITH DST TECHNOLOGY COMPATIBLE WITH GIA 100 MM RELOADS, BIPOLAR COAGULATION FORCEPS 20 CM STRAIGHT SHARP, BIPOLAR FORCEPS AUTOCLAVABLE, INSULATED HANDLES 22.5 CM SHARP, BONE WAX, CAUTERY TIP SCRATCH PAD, COBLATION WAND FOR NOSE, COBLATION WAND FOR THROAT, COBLATION WAND FOR TONGUE, COBLATION WAND DISPOSABLE FOR ADENOIDECTOMY, CP 802 COIL CABLE 8 MC CARBON, CP 802 STANDARD RECHARGEABLE BATTERY MODULE CARBON, DISPOSABLE BIPOLAR DIATHERMY LEAD, DISPOSABLE CAUTERY PLATES Bid Number ( ) : GEM/2025/B/5959739 Dated : 15-03-2025 Bid Document 1/24
Indian Air Force
LS591-0.8-BS BRASS SHEET 0.8MM THICK, LS591-1.0-BS BRASS SHEET 1.0 MM, BRB2-0.53MM BRONZE SHEET 0.53 MM THICKNESS, M3-1.5-CS COPPER SHEET 1.5MM, S-591- 36-BBH BRASS BAR HEX 36MM, PHESPHIR BRONZE BAR, MTSE-103-1.5-20 SBR BRONZE BAR ROUND 20MM, BRONZE 10-3-1.5 BRONZE ROD 45MM
Department Of Health Research
PARACETAMOL INJ 1 percent 100 ML, ETOPHYLLINE THEOPHYLLINE TAB 150MG, TACROLIMUS CAP 1 MG, LITHIUM TAB 300MG, PENICILLAMIN CAP 250MG, IPRATROPIUM BROMIDE ROTACAP 40MCG, ETOPHYLLINE THEOPHYLLINE INJ 2ML, TOLTERODINE TARTRATE TAB 4MG SR, THIAMINE INJ 100MG
Indian Air Force
procurement, laying, digging and commissioning of 23km 48 core & 02 km 24 core unarmoured OFC
Indian Army
F3533111, F3567811, F1732100, H2050504, F1748500, F8009600, F3131415, F0830710, H3550511, F3731715, F3731315, F1764800, F3545235, B7736501, F0218110, F4902100, F2241500, P0902151, F3033614, P2603451, P2603751, F1840142, F1732800, F3030113, H3050511, F0232110, F0232210, F3968400, F1732500, B2034405, F1735000, F0930715, F2753400, F3410200, F2700450, F1824222, F8404600, F1759600, F3566110, P0908951, P0909051, F1134342, H2050607, F1733300, F1731700, F1770100, F1137142, F1133960, P3715735, P3700817, P3711745, P1200827, P1200302, P3700652, P3702302, P3702536
Indian Navy
24B81C004 EMPTY CYLINDER FOR HYDROGEN GAS (N0443- 0009010), 24B81C004 CYLINDER FOR NITRROGEN GAS 5.66 CUM CAPACITY (N0433-0009020), 24B81C004 CYLINDER ACEYENE 5.66 CUM WITH VALVE & CAP-EMPY (N8120-000002), 24B81C004 CYLINDER FOR GAS OXYGEN (N8120-000007)
Hindustan Aeronautics Limited (hal)
TYPE SE-80715 Lighting Panel for Airborne application, TYPE SE-80725 Lighting Panel for Airborne application, TYPE SE- 80704 Lighting Panel for Airborne application
Gujarat State Electricity Corporation Limited (gsecl)
Ink Refills (V2) (Q4), Rollerball Pen (V3) (Q4), Ball Point Pens (V2) as per IS 3705 (Q4) MSE Exemption for Years of Experience and Turnover
Indian Army
Indian Army
Hard Coke One, Hard Coke Two, Hard Coke Three, Hard Coke Four, Hard Coke Five
Across all 7,779 tenders published on this date. Statuses reflect the latest available updates; check each tender for its current deadline.
A tender can cover more than one state. Group counts may overlap.