Loading
Loading…
Loading…
20,019 results • Latest
Copper Crimping socket for E-Beam cable of size 2.5 Sq. mm confirming to RCF Specification no.- EDTS-201, Rev-A, AM: 1, 2 & 3, Cor-2, Item-10 or latest.
Enamel Synthetic Exterior Table-1 Air Craft Blue Finishing conforming to Specification No: IS:8662/2004, ISC/108 of IS:05/2007 & ICF/MD/Spec-045. Rev-3, Issue status-2, with latest revision and amendment.
Yard Improvement & layout correction work, standardization of T/outs work at CIL Yard in the section of SSE/P.Way/CIL under ADEN-PRG in the jurisdiction of Sr.DEN- VI/LKO.
HVN-66 INSULATING LINER FOR USE WITH PSC SLEEPER TO DRAWING NO. RT-2496 SUITABLE TO 60 KG (UIC) / 60E1/ 52 KG RAILS DRW: (RDSO) RT 3706-3708 SPEC: (RDSO) IRS Specification T-44, 2025, Third revision
Control Panel Data Logger Card for Automatic smoke/fire detection and suppression system
Supply of endless, close-woven, round synthetic slings 2 ton capacity and 10 ton capacity
ELECRICAL OPERATED FULLY AUTOMATIC STACKER WITH 1500 KG CAPACITY AND FULL SPECIFICATION AS PER ANNEXURE-I
Stainless steel (S.S.) Hex head screw (M6X20) ISO 4017, IS :1364 (Part-2)/2023, A2- 70 to IS 1367 (PT-14) Sec-1/2023, CE with stainless steel (S.S.) nut (M6) DIN : 982, IS 7002/2018 Rev-3, A2-70 to IS : 1367 (Part-14) and stainless steel (S.S.) plain washer (F6.6) IS : 2016/2067 Rev-1 Amndt-4, TY-A, TAB-1.
S&T work for Replacement of old FOB by 3.05M wide new FOB with Ramp for recoupment of Divyangjan Facility at Chola & Wair stations of PRYJ Division and S&T work for Raising of Platform Up to high level for recoupment of shortfall in MEA at Hathras (PF No. 2&3 ), Barhan (PF No.1&2), Shikohabad (PF No.-3/4) and Makkhanpur (PF No. 2/3) stations.
FENTANYL INJ 100 MCG AMP, FENTANYL TRANSDERMAL 50 MCG PATCH
Rate contract for the supply of Cutter chain for FRM for IR Track machines.
SET OF HAND HOLD ARRANGEMENT WITH METRO TYPE HAND HOLDS FOR 3 PHASE MEMU/DMC COACHES.
Rate contract for the supply of Capital spares- Tungsten Carbide TampingTools (TCTT) for IR Track machines.
Intensifier for LHB wheel press out component used for oil injection as per attached drawing,WHL/04/1504. A sample has to be sent for approval of the consignee before bulk supply.
Rate contract for the supply of Capital spares- Distribution Gear Box for UNIMAT-3S, for IR Track machines.
Flushing Hooter Automatic smoke/fire detection and suppression system
COMBINATION SEJ (ASSEMBLY) : COMBINATIONCOMBINATION SEJ (ASSEMBLY) : COMBINATION SWITCH EXPANSION JOINT (WITH 80 MM MAX. GAP) FOR LONG WELDED RAILS B.G. 60E1 TONGUE RAIL & 52 KG STOCK RAIL ON PSC SLEEPER WITH COMPLETE FITTINGS EXCLUDING ERC, LINERS AND RUBBER PADS. (DRAWING AND ITEM DETAILS AS MENTIONED IN SET DOCUMENTS ARE APPLICABLE) DRG: (RDSO) RDSO/T-6782, Alt.03 SPEC: (RDSO) IRS/T-10-2025 SET DOC: SET_RT_6782_ ALT_03
Fire Extinguisher with Anti-Theft arrangement in NON AC Coaches, as per Drawing/Specification: CC64262 ALT g and follow MDTS-46270 REV. 06 Dated 26.12.2025 with Corrigendum-1 as per Design Letter No. MD46111 Dated 25.03.2026.