Indian Railways E-Procurement System (IREPS) Tenders

Atracurium Besylate 10mg Per Ml 2.5ml

4 Leg Twin path round slings with check fast external warning indicator and fibre optic inspection system of 16T SWL, 3.5 meters length as per American Standard- ANSI/ASME B30-9 and international standard ISO4878 along with the following facilities. 1) Polyester Twin path round sling having 20 Ton capacity master O Ring with 2 meters circumference length. 2) Polyester twin path round sling having 2 Nos. 10 Ton capacity Sub O Rings of 1 meter circumference length. 3) Each Sub O ring is fitted with 2 Nos of Twin path round slings with check fast system, overload indicators, Each Sling of Capacity 4 Ton, each 2 Meters effective length and each sling is to be fitted with anti abrasive sleeve at touching points. 4) Each sling is to be fitted with 9.5 Ton capacity of D shackles with Eye hook. MAKE: SIMPLEX or its equivalent.

Isolating cock without vent to RDSO Drg. No. WD-83062-S-04 Alt. 3 conforming to RDSO Spec. 02-ABR-02 with Amend. Nos 4 & Appendix-I. as per Drg.No. RDSO Drg. No. WD-83062-S-04 Alt. 3 specn: RDSO Spec. 02-ABR-02 with Amend. Nos 4 & Appendix-I.

(1) Non-Vital Output Card (M181NVOC-01) for MSDAC. (2) SENSOR RECEIVER COIL 31/36KHZ - Clamp for MSDAC as per RDSO specifications: RDSO/SPN/176/2013 version 3.0 or latest. (3) "Power supply card type B (M181PSB-01) for MSDAC. (4) SENSOR TRANSMITTER COIL- 31/36 KHZ -Clamp type- for MSDAC as per RDSO Specification RDSO/SPN/176/2013 Version 3.0 or latest. (5) Vital Input Card (M181VIC-01) For MSDAC.All item of MEDHA-MAKE.

Rehabilitation & reliability improvement of S&T gears in HJP-BCA Section.

Set of Stiffener plate with fasteners as per RDSO Drg.no.RDSO/CG/DRG/24034, Alt- 02. Item : 01 (TYPE-01) with pitch between holes (P) =100 + / - 0.5 mm & Hole distance from edge(A)=25 + / - 01 mm) suitable for (OEM-SONA BLW, SANROK, FTIRTIPL OR SIMILAR) Note : (1).Serial number (starting from 01 to till the last plate sl.no) to be punched along with Mfg. details (as per note 08 of RDSO Drg.). (2).Hardness test report (as per note 05 of RDSO Drg. for each plate duly indicating sl.no to be specified, testing must be done by a laboratory which is having approval of National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited certified lab and test reports to be sent along with the material.