Loading
Loading…
Loading…
19,516 results • Latest
REFILLING OF LPG Cylinder (19 kgs per Cylinder) Spec:- Conforming BIS 6044 (part- 1) 1971.
Patna Jn:-Provision of boundary wall in south approaches of major city Patna for prevention of encroachments in Danapur Division.
TRR (P) Between FUT-IPR from KM 21.782 - 43.000 =20.890 TKM under SSE/P.WAY/HILSA
Cess repairing/Standardization of bank under Sr.DEN/2/DNR (Total=58.00 TKM)
FEMORAL NECK TITANIUM PLATE 130DEGREE CCD ANGLE WITH ONE HOLE, 10MM BOLT SIZES 75 TO 130MM, 6.4 ANTIROTATION SCREW SIZE 75 TO 130MM, 5MM DISTAL LOCKING SCREW SIZE 30 TO 60MM WITH COMPLETE SET OF INSRUMENTATION.
Danapur:-Provision of IPS along with building for IPS and battery room for strengthening power supply arrangements at various mid-section interlocked LC Gates under Danapur Division
Repair and improvement of borewells at the different stations and repair of water booths and other misc. works in the section of SSE/W/DLI under ADEN/DLI.
CUMMINS SPARES - 1.COUPLING FLEXIBLE TO CUMMINS PART NO A064K373 2.MODULE AVT STG CONTROL TO CUMMINS PART NO 4398686 3.WOODWARD GOVERNOR TO CUMMINS PART NOA077N967
1)SHEGAON-Replacement and repairs to existing SSE(Wks) SEG & SSE(P-Way) SEG office at shegaon station under ADEN(W) AKOLA section.(ID No.01.01.64.25.3.50.023) 2)BADNERA-Construction of SSE(wks)BD office at Badnera station with allied facilities under ADEN BD section.(ID No.01.01.64.25.3.50.021)
OHE work in connection with the Provision of Model OHE in various TRD depots and Provision of anti- monkey climbing devices in Kota Division.
Procurement of Aluminium Tag for Traceability of Air Brake equipment consisting of 04 items listed below :- (1) J&T/LLH's Drg. No. 44/963 = 02 nos. each sets, (2) J&T/LLH's Drg. No. 44/962 = 04 nos. each sets, (3) J&T/LLH's Drg. No. 44/1055, Item -2 = 10 nos. each sets, (4) J&T/LLH's Drg. No. 44/1055, Item - 1 = 60 nos. each sets, (Total 76 nos. in each sets as above).
Pneumatic Impact wrench 1/2" with following specification: Max working torque fwd- 690 Nm, Max torque reverse-970Nm, Min working torque fwd-120Nm,. Air consumpation at load-9.3l/s, Air inlet thread size (in) 1/4, Max dybamic air working pressure - 6.3 bar Free speed- 10000 rpm, air consumption at free speed - 2.1 l/s aluminium cluth housing clutch lubrication type - Grease, Handle type - Pistol Impact mechanism Twin hammer output drive size (in) 1/2, Output drive type square starting system Trigger make Chicago pneumatic model CP7741 or equivalent. Makes: CHICAGO PNEUMATIC INGERSOLL RAND, APACH. AIRCAT or similar.
Lithium Ion Technology cordless Impact wrench 3/4 inches (19mm) Brushless Motor to Tech Specification Voltage Minimum 18V Battery Capacity 5Ah Torque Max. (Hard screw Driving applications) - Min 1050Nm No load sapeed RPM Max/ Hard Mid Sift 0- 3200/0-2600/0-1800/0-1000rpm, Impact per Minute 0-2200 ipm screw Diameter - M- 12-M-24 Square Drive - 19 mm (3/4 inches External square), Net weight less than 9 Kg along with accessories Tool with battery - 1 no spare Battery - 1 No. Battery Charger - 1 No. Carry case - 1 No. of Model No. DTW1001RF of Make Makita or Hikoki Model WR36DA OR its equivalent model of Bosch / Dewalt/ Snapon or Similar.
Comprehensive preventive Maintenance as per schedule and breakdown attending of EOT Cranes of different capacity at ELW/BSL for the period of 02 year.
Pneumatic impact Wrench 1" detail specification as per annexure attached.
Inj. Ferric Carboxy Maltose equvalent to [Inj. Ferric Carboxy Maltose equvalent to Elemental Iron 50 mg/ml, minimum 10 ml [ITEM CODE M240302 ]]
ALLEN KEY 17 MM. BRAND - TAPARIA, STANLEY, ESTMAN, JHALANI, DE NEERS OR SIMILAR.
Annual maintenance contract including supply and installation of must change materials/spares and scheduled maintenance of Tower Wagons of Hubballi Division for the period of 2 years.
Miscelleneous Signal & Telecom work like Cable trenching and laying, Location erection andwiring, Supply and installation of earthing, Supply and installation of MSDAC/Fire alarm system etc. in connectionwith 4th line work in Bilaspur- Jharsuguda section in Bilaspur Division of SEC Railway.
Balance work for Safety fencing along the track for running of trains in Nergundi - Gurudijhatia section under the jurisdiction of ADEN-I/Cuttack of Khurda Road Division.
Dynamically balanced rotor with shaft suitable for Ranjan make SCMRB motor for 3 Phase Locomotive. Frame Size-90L.
Motor Protection Circuit Breaker (MPCB) 6 to 10 Amps, 690V AC, 50 Hz, 3-Pole type GV2P14 with Aux. contact block 2 NO (Normally open) as per CLW Specn. No. CLW/ES/3/0096 Alt.L or latest. Make: - Schneider or ABB.
CAMC of 23 nos. of EOT cranes of CKP Division for a period of 03 (three) years.
Comprehensive Annual Maintenance Contract of CNC Axle turning Lathe Machine Plant No.-175 for 04 years at KWV/WS