Loading
Loading…
Loading…
19,642 results • Latest
SS SEAMLESS Pipe 22 x 2.0 mm in Length of 6000 mm, TO DIN 2391-C-DIN 17456 GRADE 1.4301 [X5CrNi 1810] NBK 3.1B.
KIT CONSISTING OF 05 ITEMS AS PER ANNEXURE-A TO CLW'S DRG. NO.- 1 TWD 095.098 (ALT. - 4) (REF NO. - 1, 7, 8, 9 & 29), CLW'S SPEC. NO. - 4TMS 095.036 (REV. -1) IS SPEC. NO. IS:2062-92 (GR-B) NORMALISED & STR NO. - RDSO/2007/EL/STR/ 0017 (REV. - 1).
"ADAPTOR FOR CONNECTING COMMODE WITH BIO TANK IN LHB COACHES TO ICF DRG. NO. ICF/SK3-6-3-235, ALT. b, COL-2."
SET OF HEX HEAD SCREW WITH NUT, PLAIN WASHER & SPRING WASHER, ROUND HEADSCREW, P.K. SCREW AS PER ANNEXURE.
Non-Comprehensive Annual Maintenance contract of 5 nos. screw compressors make Atlas Copco, installed in ABL, Testing Directorate, RDSO, Manak Nagar, Lucknow by OEM or Firm authorized by OEM for AMC work on open tender basis for three years
SET OF ELASTOMERIC SEALING RUBBER FOR ALL TYPE OF 3 PHASE LOCOS, AS PER CLW SPEC. NO.CLW/MS/10/022, (ALT-3). ONE SET CONSIST OF 03 ITEMS, 117.2 METERS AS FOLLOWS.(1) GASKET 4LIP AS PER CLW DRG.NO.1209-11.406- 091 (ALT-3), QTY.=16.2 METERS. (2) SELF GRIPPING SEALING RUBBER AS PER CLW DRG.NO.1209-18.406-089 (ALT-5), QTY.=100 METERS (FOR ROOF HATCH =80 METERS, FOR TFP =10 METERS, FOR TM & OIL COOLER BLOWER= 10 METERS). (3) SELF GRIPPING SEALING RUBBER AS PER CLW DRG.NO.1209-18.406- 088 (ALT-2). QTY.=01 METER
Outsourcing Phased Array Ultrasonic Testing (PAUT) of Flash Butt welded joints in Pune Division of Central Railway.
FOOT STEP ASSEMBLY FOR WAG7 LOCO TO CLWS DRG. NO.- 06/2/65/2 (ALT.- 5)
Balance work for replacement of channel sleepers by H-beam sleepers of Br No. 143/2,148/1,171/1,178/3,204/1,206/5,207/3,237/2,246/2,261/1 & 267/1 on PA-MRJ section and Br No. 1/1,1/2,5/1,5/2,6/1 & 6/2 on MRJ-KOP section under Sr. DEN/S/PA (Re-invite).
Bhavnagar Division - Comprehensive Maintenance contract (CAMC) of 500 KVA DA sets fitted with KOEL make engines in Power cars for Three years.
Rubber Gasket for OCB (each length 3.0 Meters) As per Part No.RDSO/2016/SK- 5/EL/SPEC/0123 & As per CLW Spec. No.CLW/MS/3/034(Alt.-6)
Supplying, stacking and loading into Railway Hoppers of machine crushed ballast as per revised specification RDSO/ IRSE-GE-I of June 2016 with latest amendment at Miraj depot under ADEN/ MRJ's section.
CORRIDOR DOOR GLASS FOR WAG-9 LOCOS AS PER ELS/BZA's DRG. NO. B/TRS/CB/4/53 OR LATEST IF ANY. NOTE: ONE SAMPLE SHOULD BE GOT APPROVED BEFORE EFFECTING BULK SUPPLY
Overhauling kit for Drain valve (KBIPL Part No.-I82281) of Electric CCB for 3 Phase Locomotives
Asansol Division: New Crew Lobby & Running Room at PAN, Renovation of RNG Running Room and Crew Booking Lobby of UDL.
SADDLE FOR BOGIE BOLSTER SUSPENSION FOR EMU (MC) AS PER DRG. NO.EMU/M-0-5-006, ALT.- k/2. ALONGWITH LATEST AMENDMENT/ALTERATION IF ANY
Supply, erection, testing &commissioning of 40A, 10kA capacity double pole RCCB(Adi type) with 30mA sensitivity conforming to IS 12640(Part 1) & IEC 61008-1 with latest amendment if any, rated voltage 240V, 50 Hz, mounting type - DIN rail with suitable size CRCA enclosure (4 way with blank plates)& all the accessories including wiring (with FRLSH copper wire). Make: Havells, L&T, Crompton or similar.
SINGLE POLE, 130 VOLT DC M.C.B. 16 AMPS. TO RDSO SPEC.NO. SPEC/E-12/1/04 OF MARCH'92 WITH AMENDMENT NO.1 JUNE 1993 AND RDSO'S DRG. NO. SKEL 3700 ALT.1 DATED 05.09.94 ALONGWITH LATEST AMENDMENT /ALTERATION OF SPEC/DRG IF ANY.
Set of maintenance kit for Unloader Exhaust valve as per FTRTIPL Pt. No.- 790002165
Rebuilding of Bridge No 81 ( 1 x 2.4 Mtr, 1x2.22 mtr ) span at Km 89/416-422 with RCC box on CH-ALJN section under ADEN/CH.
Safety related miscellaneous track activities in the section of SSE/Pway/CH under ADEN/CH.
MOTOR WITH CAPACITOR FOR TRANSFORMER OIL COOLER FOR BG AC EMU COMPLETE WITH FAN 0.5HP, 240V, 2.5 AMPS SINGLE PHASE AC, CAPACITOR START & CAPACITOR RUN AS PER ICF SPECN NO. ICF/ELECT/014 REV-A AND AS PER ICF DRG.NO. ICF/SK-9-0-606 ALONGWITH LATEST AMENDMENT/ ALTERATION IF ANY
Safety related miscellaneous track activities in the section of SSE/Pway/RJK under ADEN/CH.
Set of safety bracket assembly of BP and FP end cocks for WAG 9/ WAP7 Locomotives consisting Two items - (i) MS plate for bracket Assembly of BP and FP end cocks for WAG-9/WAP-7 Locos as per S.C. Rly. Drg. NO.- C/ELS/LGD/EX.FTG/4/25 (Alt.-0) Material : MS as per IS: 2062. Note: Thickness of the plate is 20 instead of 16 Qty. = 01 No. & (ii) MS Channel of Size 150 x 75 x 6 (430 mm Long) along with MS plate of Size 150 x 75 x 16 mm i.e. MS Plate (Ref: 2) to be welded to the Channel (Ref: 1) at one end as per S. C. Railway Drg. No.- C/ ELS/LGD/EX.FTG/3/12 (Alt.-1), Reference No. - 1 & 2 Qty.= 02 Nos. (1 Set = 2 items in 3 nos.) (04 Set of Sample to be got approved before bulk supply of material)
Supply, erection, testing & commissioning of 40A, 10kA capacity double pole RCCB(Adi type) with 30mA sensitivity conforming to IS:12640 (part-I) & IEC 61008-1 with latest amendment if any , rated voltage 240V. 50Hz, mounting type-DIN rail with sittable size CRCA enclosure (4 way with blank plates) & all the accessories including wiring (with FRLSH copper wire.)
A) TNA- Supply of potable drinking water through road tankers at various locations from KJRD to Thane.B) Kalva- Supply of potable drinking water through road tankers for Kalva Carshed, Kalva Colony, Parsic Sub station.C)MBQ-DW-Dativali- Supply of potable drinking water through road tankers at Mumbra, Diwa & Datiwali stations under SSE(Wks) TNA for 24 months.