Loading
Loading…
Loading…
20,019 results • Latest
AC MVRF MOTOR COMPLETE SET (INCLUDING CASING, MOTOR & FAN) FOR VERTICAL DBR AS PER RDSO SPEC. NO. ELRS/SPEC/DBR/0028, REV.0 WITH AMENDMENT NO.1 & 2(As per UVAM ID:2100996).
SET OF GASKET FOR WIND SCREEN ASSEMBLY A [SET OF GASKET FOR WIND SCREEN ASSEMBLY AS PER CLW DRG. NO. 1209-08.130-263 ALT-2 REF. - 5 & AS PER ELW DRG. NO. ELW/BSL/4/WAG-9/31.020. ONE SET CONSIST OF 02 ITEMS 16 MTRS EACH FRONT AND BACK. (ITEM IS RESERVED FOR CLW APPROVED SOURCES ONLY).]
Stainless Steel Hex Head Screw M16x50, IS:1367(Pt-14/SEC-1)2018, A2-70 Tap-2 with Plain Washer B18 (02 Nos) AISI -304 and Prevailing Torque Type Nut M16 AISI- 304 as Per ICF Drg No72763005 Alt f or Latest Item No 2,3 and 4.
FRONT SOLID CUSHION TYRES WITH RIMS SIZE 28X9.00X15 SUITABLE FOR ACE FORK LIFTER DUAL DRIVE CAPACITY 03 TON MODEL -AF30D AS PER SPECIFICATION ATTACHED, MAKE - SOLIDO / TVS OR SIMILAR.
Zone Works - Annual Section Contracts of Nanded Division under SSE/BRI/PAU Section.
Supply and Installation of One 20 Car Rake Set of Floor Skirting Profile
Procurement of Soap Loundry bars (size : 50 x 50 x 370 mm approx and minimum weight of 900 gms) to IS Spec. No IS : 285/2021 Type-1, Grade-1, Shelf life 12-18 months.
Miscellaneous maintenance contract for Electrical General Service maintenance at different service buildings of S.E.Railway complex, Garden Reach, RSBO & SHM for a period of two years .
Ursa Oil Make of Caltex or Mobil Oil DTE-3, DTE-4, DTE-4D, DTE Heavy
Seat cushioning material size 51 x 550 x 1820 mm as per Drg. no. ICF/TCN-6-1- 819 alt-a/2, item-5 to RDSO spec. No. C-K607 (DTBPB) (Rev.2 of December -2015 with amendment -1 of August-2016)
Smart phones (5G compliant) specificatio [Smart phones (5G compliant) specification as per Annexure A enclosed.]
Equalizer Spring seat Assly. for WAG7 loco,CLW drg.- 06/3/15/63 with latest Alt.
SET OF ITEMS FOR THE STIFFENER PLATE OF FRONT CARRIER PLATE FOR AAR H TYPE CBC WITH BDG ( full description attached in documents).
Rail Renewal with 52 kg-260 meter rail panel at identified stretches under Sr DEN/Ratnagiri section
Flexible Hose Assembly for Sand Ejector of Locomotives ,Specification :- CLW Drg. No.0/3/65/402 Alt. -4 Ref. No. C with latest Alt.
INSULIN HUMALOG MIX 25 KWIKPEN (LISPRO 25% + LISPRO PROTAMINE SUSP 75%) IN PFS
Carbide Inserts TNMG 220412 Grade TN 200 [Carbide Inserts TNMG 220412 Grade TN 2000 as per Widia Part No TNMG 220412 Grade TN 2000 or equivalent. Make: WIDIA, TAEGUTEC, SANDVIC or equivalent. (Purchase proof from OEM/ Authorized dealer is required.)]
Rubber Spring for Fiat Bogie to RCF Drg. No.LW05120, Alt.Nil, to be read with T.S.17.531 100 03, T.S.17.617 100 02, MDTS-148 Rev.01 and MDTS-122 Rev.03.
Annual Bridge Zonal Works 2026-27 under Sr.DEN/W/NED Jurisdiction.
DIFFERENT SIZE AND SPEC THREE POLE POWER CONTACTOR AS SPECIFICATION & DRAWING:
Rate Contract for supply of 10 mm thick Pocket Type Nylon Cord Reinforced Grooved Rubber Sole Plates for 1 in 12 turnouts 60Kg TWS to RDSO layout Drg. No. T-9790 (Alt-1)
HEX NIPPLES N - 8 15 MM HALF INCH AS PER TABLE NO .7.2 OF IS : 1879 /1987 WITH AMDT . NO. 1 TO 5