Loading…
Loading…
19,812 results • Latest
ENAMEL, SYNTHETIC, EXTERIOR, FINISHING OXFORD BLUE to ISC:105 OF IS:5/2007 (RA-2022) to SPEC. IS:8662/2024 OR THE LATEST AND ICF/MD/SPEC- 045, ISSUE STATUS 2, REV.03 WITH AMDT. DT. 22/4/2008 WITH RDSO AMD. NO. 01 (REV. 0) OR THE LATEST.
Wire wound resistor 9.4 Ohms +/-5% 750 Watts along with fixing Clamps size: 105mm at both ends. Note: One sample should be got approved before effecting bulk supply.
Endoscopic linear cutter Gun 65 MM Open with 6 Assorted ridged Reloads compatible with 45/60 mm Cartiridges with 6 rows of B Shaped staples , 45 Degree, 360 Degree rotation { KIT }
Set of contact tips for 150 AMPS Contactor - 3 pole, type LC-IF- 150 AFD
Overhauling/Rehabilitation of Unit Injectors Set of HHP Diesel Locomotives at Locomotive Shed, Sabarmati.
FLANGE MALE CONNECTOR( PIPE TO EQPT) 20 MM N.B (70 MM PITCH) TO DRG NO ICF/STD-3-5-020, ITEM-1, ALT c, AS PER ICF SPECIFICATION NO. ICF/MD/SPEC-166.
Supply of CELL COUNTER ( FULLY AUTOMATED 7 PART WBC DIFFERENTIAL HAEMATOLOGY ANALYSER AUTOLOADER)
Polyster self gripping Mesh for Open inguinal hernia Size 14x 9cm for both right and left side
2 Piece, 3 Step seating PNME Gas cutting Nozzle of Size 5/64" for Oxy-LPG cutting as per IS:7653:1975 Note: ISI Make Only Make: ESAB, MESSER, JAINCO, WELDSTAR or Similar.
PU paint for wagons colour gentain blue ( RAL-5010 ) RDSO Spec. no. M&C/PCN/109/2020 Rev-1, With Amndt.-1B.
OFF Time Delay Relay for QCFL/PR-1/Q119 application.
Screw Driver Two In One as per detail specification-Material Beryllium Copper ,Conformity of specification IS 4595(1969) or latest,Blade length 150 mm, Tip Size 6mm, Length 15 inch.
Supply of ballast in various yards i.c.w. Improvement in various yards ofSSE/P.way/NSS under ADEN/LDH in the jurisdiction of Sr. DEN-I/FZR
(2026-27 AMI Code-28S 013) Ointment Silver Sulphadiazine 1% w/w in 250gm Jar
Bilaspur division: TSR(P)-20.294TKm (Champa - Gevra road Section), TSR(P) - 31.677 TKm (Bilaspur - Anuppur Section), TSR(P) -23.428 TKm (Anuppur-Katni Section) & TSR(P)-9.511 TKm (Anuppur-Ambikapur Section), Total 84.91 Tkm, by Contractor's PQRS portal.