Loading
Loading…
Loading…
60,726 results • Latest
Low Torque Grease Seal for AAR Standard Upgraded Class 'E' (6"X11")
Carbon brush complete for MCPA as per S.C.Rly drawing no. A4/EL/WAM4/1084, Alt.2 using CLW approved grade EG-14 D(I) Imported/Indigenous grade of M/s. Assam Carbon Pvt. Ltd.
Three-point portable digital wheel diameter gauge for BG wheels as per attached specification
SILENT BLOCK FOR ANCHOR LINK (TYPE-A) TO RDSO DRAWING NO. SKETCH- 94101, ALT. 2 CONFORMING TO RDSO SPECIFICATION NO. C-9406 (REV. 2) WITH AMENDMENT NO. 2 OF AUGUST-2016.
Solideal/Camso tubeless tyre for skid steer loader size: 10 x 16.5 x 10 X D44(10PR)heavy duty, extra - deep tread (LS), SKS774, Make: JCB/CAMSO/CEAT/MRF/JK or EQUIVALENT.
PACKING RING 13mm THICK TO RDSO DRG. NO.SK-97072, ITEM-1, ALT:NIL.
Isolating cock without vent to RDSO Drg. No. WD-83062-S-04 Alt. 3 conforming to RDSO Spec. 02-ABR-02 with Amend. Nos 4 & Appendix-I. as per Drg.No. RDSO Drg. No. WD-83062-S-04 Alt. 3 specn: RDSO Spec. 02-ABR-02 with Amend. Nos 4 & Appendix-I.
110 Volt 40 Ah Lead Acid Low Maintenance Battery Set consisting of 55 nos. cells (2volt each) cell Type: T40P with tubular positive & pasted negative plates assembled in PPCP container with microporous vent plug & sealed float guide with inter cell connector, nut bolt &washer in Dry uncharged condition complete as per RDSO specification No. RDSO/PE/SPEC/TL/0040 (Rev.2) 2021 or latest with electrolyte in seperate jar along with all accessories Electrolyte as per manufacturers cell capacity plus 10% extra & maintenance tools as per para-No. 11 of RDSO specification or latest.
ESMON & VCB reports printer cartridges compatible to Kyocera make ECOSYS M5526cdw printer. Cartridges set consists of 1. TK5244Y-1No, 2. TK5244C-1No, 3. TK5244M-1No, 4. TK5244K-1No
Thermal Scanner-Thermal imaging camera with Object Temperature Range: -20 degree C to 400 degree C (-4 degree F to 752 degree F) Resolution: 160 x 120 pixels (19,200 pixels total)Connectivity: Wi-Fi enabled, Battery Type: Rechargeable built-in Lithium-ion Battery Operating Time: Up to 4 hours, thermal sensitivity of 0.06 degree Celsius, Image Detector Type Uncooled focal plane array (FPA)Vox/Asi/BST/Silicon MAKE: FLIR/FLUKE/TESTO ONLY
Antifrogen N water mixture 30% v/v, pack size 50 kgs.
SINGLE ROW DEEP GROOVE BALL BEARING SKF 6305 C3.
Sand Ejector Assly for WAG9/WAP7 locomotives.
MUST CHANGE ITEMS FOR LHB POWER CAR COACHES
Set of items, Set consists of two items as detailed below: ( 1) Funnel for bearing adapter bushing as perS.W.RLY.drg no. EMD/UBL/UT/1214-2, - 02 Nos. (2) Tool for installation/ removal for car body bushing (transom end ) as per S.W.Rly.drg.no.EMD/UBL/UT/0313-4 (RAM+FUNNEL)., Qty -01 No
Hose flexible for TM ventilation of 3Phase Locos as per CLW drawing No.1209- 11.339-037 Alt-1 or latest.
BALL BEARING 6214-RS1Z-C3 OF MAKE: SKF/NTN JAPAN/FAG GERMANY IMPORTED OR FULLY EQUIVALENT FOR BKBL.
WATER GLOW ROD WASHER VITON AS PER EMD PART NO.40010387 Alt Nil or latest. Size: 15/16 inch OD 3/4 inch ID 13/32 inch thickness.NB: The Firm/supplier shall submit a sample for approval before commencing bulk supply. This is to ensure that the dimensions and specifications are verified and approved prior to production.
Auxiliary line Volt meter complete as per CLW specification no. CLW/ES/I-21 Alt-C or With latest alteration.
Non contact Laser scanning based wheel profile measurement system as per attached technical specification with calibration certificate traceable at NABL.
CYLINDER CLUTCH COUPLING as per Deutz Part No:0148-81-009 Make: Deutz, FTE
Laminated window glass as per ELS/GMO Drg. No. TRS/GMO/M-1/003/ER ALT-1.
Foot Switch spring load for sanding, vigilance and release of independent brake
Supply of "List of gauges used for Bogie LWLH 25 as per (G-112 Standard) consisting of 17 items as per list enclosed."
Supply of Refringent 410 gas ,Make :FLORN,HIPLON and RETRON for maintenance and installation AC Plants and water coolers. Similar/equivalent make.
Set of items required for Under slung.
Hex. Socket Counter sunk HD Screw M8X70 conforming to IS 6761: 1994, 12.9, MDTS-057 (RCF PL No.33672441).
Hex. Nut M30 conforming to IS 1364 (Part 3) : 2002, IS 1367 (Part 6) : 2002, 10, MDTS-057.
3 sq. mm solderless crimping socket, type-18A as per S.C. Rly Drawing No. B/TRS/MOD/WAM4/4/79
COVER COMPLETE FOR WASTE BIN ARRANGEMENT IN LHB COACHES.
O RING to Medha drg. no. A-A675UV2-147770 for CTRB of Vande Bharat Trainset Bogies. (Ref. ICF drg. no.TS/DTC-02-001, item no. 8, alt.e) DRG NO : As mentioned in the description.
Paint Enamel, Synthetic Exterior Finishing.
Epoxy adhesive (Resin & Hardener) in packets of 180 grams.
HQ_Med_Drugs_GTE_ZRC_Zonal Rate Contract for supply of (PH NO.:14060) Finerenone 10mg Tab
BOGIE BRAKE PUSH ROD TO RDSO DRG NO.SK-69597, ITEM-3, ALT-43
Live Line Monitoring Gauge (LLMG) supported with Android application for height and stagger measurement as per RDSO specification No. TI/IN/0046 (02/26) (enclosed).
Supply, Installation, testing & commissioning of Server with Operating system software as per Technical specification details attached at Annexure-A
ADJUSTER NUT CONFIRMING TO RDSO SPEC . No. 07-ABR-1992 AMENDMENT No.5 OF SEPT-2016 TO RDSO DRG.NO.WD-82064-S-02 RC, ITEM-2 ALT.7.
LEADER NUT FLANGE CONFORMING TO RDSO SPEC. No. 07-ABR-1992 AMENDMENT No. 5 of Sept. 2016. TO RDSO WD-82064-S-05 RC ITEM-1 ALT.7.
RING FINISH MACHINED FOR DIRECT MOUNTED ROLLER BEARING ARRANGEMENT.