Rajasthan Tender Results

Coupler Rod for non transition CBC of bogie container flat (A-CAR) as per drg. No. CONTR - 9405-S-17 Alt-5, item No. 1.

Supply, Installation, testing andcommiss

Digital Buffer projection gauge, Range: -550 mm to 650 mm

Body side hand hold for BOXNHL to RDSO drg. no. WD-05086-S-05 Alt-7, item-7

DC ANALOG AMPERE METER (0-100 AMP) 75mV FD PANNEL MOUNTED 96X96 MM SUITABLE FOR FITMENT IN TOWER WAGON .

Balance weight for 4303 BY/DY traction motor armature as per Drg No.ER.KPA.EL.TM.4HE.4156.

Driver control Switch Type - 3DCS-DTC for tower wagon.

Twin Beam LED Head Light (ROUND SHAPED) , conforming to RDSO Specification No.RDSO/2017/EL/SPEC/0134 Rev-2, system volt 85V-138V( Nominal 110V) Suitable for conventional MEMU ,Mounting Arrangement As Per RDSO Sketch SKEL-5042 ALT- 0.

Supply of Standby Inverter suitable for 0.75 HP Fuel Pump Motor.

Mycophenolic acid/ Mycophenolate Sodium 360mg. Tab./Cap

Lead seal size dia 13 mm type-II to IS:13923/2023

COMPACTOR ASSEMBLY KIT (AD) FTRTIL NO. 790029205 DLW PART NO. 11661458

TISSUE PAPER ROLL

MUELLER HINTON AGAR PACK SIZE (1 X 500 gm)

PROTECTION COVER FOR PASSENGER EMERGENCY [PROTECTION

HEX HEAD BOLT M24X300

TUBULAR STAY SLEEVE [FORGED] RI.NO. 2403-2 WITH BOLTS AS PER DRG NO.TI/DRG/OHE/FTGFE/RDSO/00004/03/0 OR LATEST.

TUBE CLAMP GALVANIZED STEEL WITH RUBBER.

Mirror ( Standard quality ) in lavatory of LHB coaches.

AIR VENT FOR LHB C 3 TIER ECONOMY COACHE

Supply of Magnet Proximity Switch in robust AL.Die cast body with dual contacts

MODIFIED TRACTION LINK BOLT M20

Stainless Steel Hexagon Domed Cap Nut to size : M8 , as per IS : 7790/1991 , Rev.-1.

SUPPLY OF LT WHEEL FOR EOT CRANE AS PER DRAWING NO. SKT-2023/63/C.

TUBE CLAMP FIT TO CONDUIT SIZE NW36 (DIA 40 MM), CLAMP SHALL MEET ALL TECHNICAL REQUIREMENTS SPECIFIED IN ANNX-A, TAB-A8, S.NO.7 OF SPEC. NO. RDSO/PE/SPEC/AC/0138-2009, REV.1. ACCEPTED MAKE AS PER VENDOR LIST.

TUBE CLAMP GALVANIZED STEEL WITH RUBBER

Hex head bolt complete for centre pivot arrangement

GF CONTACTOR as per Drg.No. EMD PT NO.8330937 specn: DLW PT NO.18140063.

Retaining ring for casnub bogie .

O Ring for Nut Part No: SEPL/O/1305/130 for Automated Hydraulic Bearing Extractor 130 Dia. Bearing No-22326.

25 kV OHE Discharge Rod Assembly suitabl

Supply of Governor ( Electronic Part No [ Supply of Governor

Coat Hook

Stainless Steel Toilet Lock

BOTTOM COVER

Towel Ring for Vande Bharat Coaches

MTP-500 4.5 m air cooled torch with accessories compatible/confirming to part no. 6258504

Modified 'J-1 ' FILTER ASSEMBLY.

Supply of Transformer Oil Filtration Plant 2400 LPH capacity single stage 415 V, 3 Phase, 4 wire AC 50 Hz, Two Nos Rubber Hose Pipe 10 meter each inlet & outlet

CYLINDER BARREL ASSEMBLY-AIR SIDE DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE SPAC PART NO-SPAC 0020604

Leather hand gloves 450 mm for welders to WCR Specification WCR/PPE/Spec./Leather hand gloves/0.1" as per attached specifications.

ESCORTS make Brake Caliper with Brake Cylinder

Heavy Duty Solid Tyre wheel assembly ,Heavy duty rubber solid tyre wheel assembly

(1) Hose assy 3/8" [length 3000 mm], FTIL part no.- 708014400. (2) Hose assy 3/8" [length 1600 mm], FTIL part no.-708009600. (3) Hose assy 3/8" [length 2000 mm], FTIL part no.-FT0055651-000. (4) 1-1/4" cut off angle cock with vent - (MP), FTIL part no.-607001600. (5) 1-1/4" cut off angle cock with vent - (BP), FTIL part no.- 607001500. (6) 1-1/4" hose for dead movement (MP), FTIL part no.-608001000. (7) 1-1/4" hose connection (MP), FTIL part no.-608001400. (8) 1-1/4" hose for dead movement (BP) FTIL part no.- 608001100. (9) 1-1/4" hose connection (BP) FTIL part no.-608001300. (10) 24DEG CONE END CONNECTOR WITH ORING FT0053735-000 (Hose assy - service brake). (11) 24DEG CONE END CONNECTOR WITH ORING FT0053734-000 (Hose assy - parking brake). (12) Isolating cock 1" [W/O vent] , FTIL part no.-023017000. (13) Duplex pressure gauge ?80 scale 0-12 bar [MR-BP] FTIL part no.-FT0053800-100. (14) Pressure gauge Dai. 80 scale 0-10 bar FTIL part no.- FT0024835-100. (15) Duplex pressure gauge ?80 scale 0-12 bar FTIL part no.- FT0053800-101. (16) EP valve (application) EVF FTIL part no.- 2/518056. (17) EP valve (release) EVSF FTIL part no.-2/515811. (18) EP valve (EVSB) FTIL part no.- 2/515814. (19) MAGNET VALVE VE3 NO 110V (A/DIODE) FTIL part no.-7811200708. (20) ISOLATING COCK 1/2" BSP (CLP) FTIL part no.-FT0051880-100. (21) Pressure switch (PBPS) 5.2/6.0 bar FTIL part no.-FT0051877-213. (22)Pressure switch assy (PCF) FTIL part no.-FT0051877-200. (23) DRAIN COCK FTIL part no.- 2/515252.

BRUSH STARTER MOTOR. EMD PART NO.1852886, DELCO REMY PART NO. 1906989.

ESCORTS make Brake Caliper

Hex nipples N-8, 15 mm

"2.5 KV digital insulation tester similar to MECO Model: DIT-918. Range- upto 20G ohms. Make; MECO, Motowane, Megger, Fluke (or) Similar. Note: Item to be supplied along with calibration, warranty certificate and carrying case."

SUPPLY OF YELLOW RETRO REFLECTIVE SHEET FOR LC BOOM PRISMATIC GRADE REFLECTIVE SHEET OF SIZE 305 X 290 MM ONE SET CONSIST OF 18 PIECES.

OVER HAULING KIT FOR BRAKE CYLINDER .