Unknown (Unspecified Location) Tender Results

Set of spare parts for speedometer

INFRARED PORTABLE PYROMETER.

Contactor STA

Set of copper lugs of different sizes (i) Copper Lug Size: 185/20 - 200 Nos. (ii) Copper lug size: 185/12 - 200 Nos. as per CLW spec no. CLW/ES/3/0130/O.

Electronic Controller Card (PCB) for 110 v BLDC Railway Carriage Fan as per RDSO Specification No. RDSO/PE/SPEC/TL/0021/2005, Rev-2 or latest. Sensor less with Interchangeability features

Solebar for BOXNHL wagon to RDSO drawing No.WD-05086-S-14 Alt.-10, Item No.1. Material and Specification as per drawing.

Claude.AI Software

Locking plate for centre pivot arrangement size 1.6 x 70 x 311 mm., Drawing - RDSO/SK-80042, Item 1, Alt-nil.

HVAC spare part Condenser Fan Motor.

HVAC spare Servo Motor for Return Air Outlet (Damper Motor)

SET OF FERRULES FOR BRAKE ASSLY.FOR WAP1 [SET OF FERRULES FOR BRAKE ASSLY.FOR WAP1 LOCO BOGIE AS PER SKETCH NO. ELW.BSL.SK.7028 ALT.3 COMPRISING OF 05 ITEMS = 72 NOS.]

Supply and installation of hydraulic puller for replacement of Aclathan ring/Elastic ring of WAG-9 locomotive as per specification attached in Annexure.

INJ PANTOPRAZOLE 40 MG

H.P. GUDGEON PIN

FLANGE WELDED JOINT [Stainless Steel] 20 mm NB etc

Digital bore gauge, Range 160 mm to 250 mm, Least count 0.001 mm

LUBRICANT FOR BRAKE CALIPER OF FIAT BOGIES etc

BRAKE WAY PROTECTION VALVE

Rubber Buffer spring etc.

Gasket Fuel Pump support.

MODIFIED LOUVER ASSLY FOR CAB WINDOWS (WAM-4,WAG-5 TYPE LOCOS) AS PER DRG. NO: ELW/BSL/2/F-79.120

Rubber dust

ISO 2341-B-36X85-C45+QT_ BOGIE LIFTING PIN, as per Drawing: B-A675UV2-139463 ALT. "00".

PISTON SEAL

FAN MARK V FOR EXTENDED

70 Degree 2 MHz 15 mm Dia. Or 15 x 15 mm

ALUMINIUM POP RIVET (BLIND RIVET )

SUPPLY AND INSTALLATION OF FRP MODULAR TOILET

BOLT ASSEMBLY FOR HORN ST,HORN STAY BOLT FOR BOGIE,

3/4 MANIFOLD MOUNTING ISOLATING COCK

48 Volt/200AH VRLA Battery

Unified pressing of SS lavatory

SPECIAL BOLT

KIT OF PACKING PLATES

Flap Door Arrangement complete for BOXNHL Wagon etc.

Portable Emergency Lighting equipment Box

NORMAL SALINE NASAL DROPS 10 ML PHS

PROTECTION COVER FOR PASSENGER EMERGENCY ALARM PULL BOX., AS PER DRG. RDSO/CG/DRG/23003 ALT.1

Overhauling kit for LRU Controller Assembly (EBV-A)

SET OF BRACKETS

Lower Spring Beam Arrangement for DPCs

RC FILTER CONSISTING OF 1 OHM 6W RESISTOR

Rubber Buffer Spring

BULL GEAR (72 TEETH) FOR WAP-7 LOCO AS PER RDSO SPEC. NO. MP.0.2800.19 (REV. 01) JUNE 2019 OR LATEST AND RDSO DRG.NO. SKDP-3474 ALT. 4 OR LATEST

COMPLETE CONDUIT SEAL RING FOR JUMPER PLUG ASSEMBLY

Exchangeable Die set with W profile

29310088-F.S. ALL STEEL LOCK NUT

Non-sparking double open ended spanner with nominal size 30 X 32 mm.

Lavatory window with Fixed Louvers and sealed Glass unit for LHB Coaches as per RCF Drg. No. LW54188 alt - a and follow RCF/KXH Design office L No. MD35131 dated 26.12.2022. To be procured from RCF approved sources only. RCF Item ID: 2400001

Swivel Elbow Connector 10 mm OD X G 1/4