REPAIR/MAINTENANCE OF WATER SUPPLY INSTALLATION AND ALLIED WORKS AT VSN GANDHINAGAR AND REPAIR/MAINT OF RO PLANT, DOSING PUMP AND ALLIED WORKS AT HQ SWAC, SEC-09, SEC-17 GANDHINAGAR AND COMN FLT AHMEDABAD

Amount

Testing of Bore well water/Raw Water/Clear Water to analyse the following parameters as per IS 10500:2000 through Govt. approved laboratory:- a) Physicochemical analysis of potable water b) Bactoriological analysis of potable water

Testing of Raw sewage water/ treated sewage water analyse the following parameters through Govt. approved laboratory:- (a) BOD (b) COD (c) Total solids (d) Suspended Solids (e) PH (f) Total E. coliforms

S&F in replacement 100mm dia polypropelene Ball valve flange type as per existing sample of Make- UV Rich/Parixit or equivalent as approved by GE as per site requirement.

S&F in replacement 100mm dia polypropelene non return valve flange type as per existing sample of Make- UV Rich/Parixit or equivalent as approved by GE as per site requirement.

S& F in replacement polepropelene/nylone rope of 12mm dia heavy duty connected with suction sweeper as per site requrement complete all as specified and directed.

S& F in replacement swmimming pool suction cleaning heavy duty flexible hose pipe as per sample complete all as specified and directed.

S& F in replacement swmimming pool leaf cleaning net heavy duty with telescopic aluminium pole as per sample complete all as specified and directed.

S& F in replacement swmimming pool vaccum brush head made of S/S with 24 inch vaccume brush and connecting accesories as per sample complete all as specified and directed.

S & F in replacement under water swimming pool light fitting 18watt, 12V supply as per sample complete all as specified and directed by Engr -in -charge .

Supply only TCCA 90 % chlorine Granular in plastic container as per sample and make approved by GE

Supply & fixing in replacement cast iron rubber lined diaphragms valves of 80mm dia as existing sample for sand filter complete all as specified and directed

S & F in replacement of copper ionisor rod with sensor for swimming pool complete as per existing sample complete all as specified and directed

Supply only Granular Copper sulfate of best quality as directed by Engr-in-charge.

S&F in replacement Pool Line Free Chlorine Checker HC - HI7014 Free Chlorine Range 0.00 to 2.50 ppm (as Cl2) Photometer/Colorimeter Light Source LED @ 525 nm as per sample with free chlorine reagent kit 100 tests (Make : HANNA or equivalent as approved by GE.)

Supply & fix in repairs rubber lined diaphragms suitable for 80 mm dia cast iron diaphragms valves as per existing sample complete all as specified and directed

S & F in replacement ioniser electric supply controler as per existing sample for swimming pool complete all as specified and directed

M & L for taking out of gravel and quartz sand from pressure sand filter with segrigate sand and after removing blockage, lekage of pressure filter filling of gravel and sand complete all as specified and directed. Note :- Defective PVC broken pipe will be replaced and paid under respecive item here in after.

M & L for topup and filling of 2mm size quartz sand in pressure water sand filter complete all as specified and directed.

S&F in replacement UPVC ball valve with handle, both side socket ends suitable for 15mm dia pipe complete all as specified and directed.

S&F in replacement UPVC ball valve with handle,both side socket ends suitable for 20mm dia pipe complete all as specified and directed.

S&F in replacement UPVC ball valve with handle, both side socket ends suitable for 25mm dia pipe complete all as specified and directed.

S&F in replacement sluice valve of size 100 mm dia and class PN 1.6, with iron wheel head, screwed both ends to DI pipe and fixed complete all as specified and directed.

All as per item No. 22.00 above but 150 mm dia sluice valve complete.

All as per item No. 22.00 above but 200 mm dia sluice valve complete.

S&F in repair air release valve made of CI of size 50 mm dia complete all as specified and directed.

S & F in replacement of old unserviceable 15 mm dia UPVC pipes Sch- 80 with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed. Note:- Excavation/ earth work will be measured and paid separately under respective items.

All as per item No 26 here-in-before but 20 mm bore UPVC pipes with fittings

All as per item No 26 here-in-before but 25 mm bore UPVC pipes with fittings

Supply & fixing in replacement non return sluice valve suitable for 100 mm dia pipe complete all as specified and directed.

Supply & fixing in replacement non return sluice valve suitable for 150 mm dia pipe complete all as specified and directed.

Supply and fixing in replacement Pressure gauge 4" dial 0-14 kgs rating complete all as specified and directed.

Supply and fix in repair Foot Valve conforming to IS 4038, 100/125 mm dia made of cast iron as per exixting sample.

S&F MCB single pole with neutral, 6 to 32 Amps, 250 volts with ‘C’ curve, fixed in existing PVC box including connecting complete all as specified and as directed.

S&F MCB TPN, 32 to 63 Amps, 250 volts with ‘C’ curve, fixed in existing PVC box including connecting complete all as specified and as directed.

Supply and fixing in replacement u/s MCCB of 63-100 Amps, 3 pole, 25 KA with Adjuestable thermal setting suitable for 415 Volt, 50 Hz, in existing panel with suitable size lugs , nuts, bolts and washer etc complete all as specified and as directed.

Supply and fixing in replacement u/s MCCB of 125-160 Amps,4 pole, 25 KA with Adjuestable thermal setting suitable for 415 Volt, 50 Hz, in existing panel with suitable size lugs , nuts, bolts and washer etc complete all as specified and as directed.

M & L for making serviceable old UNSV Motor starter of any type carrying out repair and with replacement of defective minor spare parts such as connector, burn contol copper cable, insulator, Terminal Block, copper thimbles, etc or if any other required minor spare parts at site for including testing to ensure efficient and smooth functioning of starter complete all as specified and directed. Note:- Defective major components/spares if required to be replaced shall be measured as supply under respective item 38 to 46 here-in-after and labour element included in this item for replacement.

Supply only power contactor 3 pole 09/12 Amps with new one as per existing sample complete including connection & testing.

Supply only power contactor 3 pole 22/25 Amps with new one as per existing sample complete including connection & testing.

Supply only power contactor 3 pole 32/40 Amps with new one as per existing sample complete including connection & testing.

Supply only power contactor 3 pole 50/70 Amps with new one as per existing sample complete including connection & testing.

Supply only Add-on aux. contact Block suitable to existing contactor alongwith connecting and testing complete all as directed as per existing sample

Supply only timer of any type with new timer suitable to existing sample for fully automatic motor starter complete all as directed.

Supply only single phase preventer of any type with new single phase preventer suitable to existing sample for fully automatic motor starter complete all as directed.

Supply only over load relay of range 20-33 Amps or as per existing sample complete all as directed.

Supply only over load relay of range 36- 60 Amps or as per existing sample complete all as directed.

S & F in replacment of ON/OFF, Start/ Stop push button suitable size, colour and rating to existing one complete including connection & testing complete all as specified and directed.

S&F in replacement of old u/s digital Ammeter 3 phase with suitable rating to existing CT complete including connection & testing complete all as specified and directed.

S & F in replacment of digital volt meter 3 phase suitable size to existing one complete including connection & testing complete all as specified and directed.

S & F in replacment of indication lamps with LED type indication lamps with showing red, yellow and green colours suitable for 240 Volts AC supply as per existing size complete including connection & testing complete all as specified and directed.

M & L for Cutting out the burnt cable end and reconnecting with providing new lugs, tapes etc for cable size upto 50 sqmm 3.5 core complete all as specified and directed.

Replacement of old unsv rubber mat with the new rubber mat suitable for LT panel of size 2m x 1m x 15mm thick, ISI marked complete all as specified and directed by Engr-in-Charge.

M&L for taking out of submersible pump set 0.5 to 1.0 HP from fountain with removing water pipe connection and removing of polyethelen, threades, tree leaf etc. from pump foot valve, impeller and refixing after cleaning complete all as specified and directed.

M & L for taking out of submersible pump set 2.0 to 3.0 HP from fountain with removing water pipe connection and removing of polyethelen, threades, tree leaf etc. from pump foot valve, impeller and refixing after cleaning complete all as specified and directed.

M & L for taking out of submersible pump set 5.0 HP from fountain with removing water pipe connection and removing of polyethelen, threades, tree leaf etc. from pump foot valve, impeller and refixing after cleaning complete all as specified and directed.

S& F in replacemnt of Centrifugal water pressure pumps of 0.75 HP , IP-54 of discharge rate- 5.0 cum/Hr with head 20.5 M operated on 240V, 50 Hz with complete as per site requirement or as directed by Engr-in-charge.

S&F in replacement Air tank 24 Ltr for booster (pressure) pump 1 HP pump with all accessories complete all as specified and directed.

S&F in repairs Danfoss KP-35 pressure control switch for Booster (presuure pump) 1 HP of existing make complete all as specified and directed.

S&F in repairs 1 HP pressure pump auto On/OFF controller complete with all accessories complete all as specified and directed.

S&F in replacement PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 10.0 Sqmm 3 core complete all as per site requirement or as directed.

S&F in replacement PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 2.5 Sqmm 3 core complete all as per site requirement or as directed.

S&F in replacement PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 1.5 Sqmm 3 core complete all as per site requirement or as directed.

M&L for preparation of LT panel for painting and applying two coats synthetic enamel paint as per existing colour complete all as specified and as directed.

M&L for preparation of water pipe line (outer surfaces) for painting and applying two coats synthetic enamel paint as per existing colour with showing arrow in water flowing direction in white colour complete all as specified and as directed.

S & F in replacement submersible pump controller of relay range 12-20 Amps single phase in sheet metal enclosure type with Ammeter and voltmeter for 1 HP electric motor . Make of L & T model MF-G1 or equivalent as approved by GE.

S & F in replacement submersible pump controller of relay range 9-14 Amps in sheet metal enclosure type with Ammeter and voltmeter AC-3 phase, 415V, 50 Hz suitable for 5 HP electric motor complete all as specified and directed.

M&L for replacement of old unserviceable star delta starter with Fully Automatic Star - Delta Starter of relay range 9- 14 Amps in sheet metal enclosure type AC-3 phase, 415V, 50 Hz suitable for 10 HP electric motor complete all as specified and directed.

M&L for replacement of old unserviceable star delta starter with Fully Automatic Star - Delta Starter of relay range 13-21 Amps in sheet metal enclosure type AC-3 phase, 415V, 50 Hz suitable for 20 HP electric motor complete all as specified and directed.

M&L for replacement of old unserviceable star delta starter with Fully Automatic Star - Delta Starter of relay range 30-50 Amps in sheet metal enclosure type AC-3 phase, 415V, 50 Hz suitable for 30 HP electric motor complete all as specified and directed.

S & F in replacement PVC insulated and FR PVC Round Sheathed, flexible Copper Conductor 0.5 Sqmm, 6/8 core control cable, 1100 Volts, conforming to IS: 694 for water level indicator fixing on wall/ floor in PVC conduit or hanging in air with the help of GI wire complete all as specified and directed by Engineer-in-Charge

S & F in replacement for Water Level Indicator with Low & High Water Level Alarm conforming with 4 levels of LED indication representing 25%, 50%, 75% and 100% levels in the tank, Power ON Led indication, Audio & visual Level indication including with 4 Nos moulded silver steel contact type sensor complete suitable to existing sample complete all as specified and directed.

M & L for overhauling and repair of open well submersible pump set single phase of 0.5 HP of any make and capacity from foundation and transporting to authorized workshop to carry out works replacement of defective parts such as bearing, bush,Mechanical seal, impeller etc. including necessary lath work, metaling, turning, poloshing and cutting & removing existing burnt/short circuited winding wire complete for Rewinding of 1 Phase, submersible electric motor with PVC insulated copper winding wire of same gauge, reassemble all the parts and refixing at same position and testing complete all as specified and directed.

All as per above item No 72 but electric motor of 1.0 HP, 240 volts

All as per above item No 72 but electric motor of 3.0 HP, 415 volts

All as per above item No 72 but electric motor of 5.0 HP , 415 volts

All as per above item No 72 but electric motor of 7.5/10 HP, 415 volts

All as per above item No 72 but electric motor of 25/30 HP , 415 volts

Disconnecting Calcium Hypo chlorite dosing plant of any make and capacity alongwith components, and transporting to authorized workshop to carry out repair/replacement of defective minor spares parts i.e. spring, oil seal, pan head screw, circlip, Stroke knob and nut, bolt and washer etc. including cleaning, washing/reassembling the plants and testing after repair complete all as specified and directed by Engr-in-charge Note : (i) Defective major components/spares if required shall be measured as Supply only under respective item 79 to 87 here-in-after and labour element included in this item for replacement. (ii) All items being spare parts as under will be replaced as required as per cat part or as per existing sample to shoot the equipment for smooth functioning. (iii) Non taken over site by the contractor and delay in repair if noticed the recovery shall be made Rs 500/- per day from contractor bill till complete the job because of unchlorinated water cannot be supplied to the troops.

Supply ball ceramic (liquid end)

Supply suction valve (liquid end)

Supply discharge valve housing (liquid end)

Supply anti syphon valve (liquid end)

Supply special function valve (liquid end)

Supply low level switch (liquid end)

Supply diaphragm (liquid end)

Supply foot valve assembly (liquid end)

Supply head for dosing plant (liquid end)

S&F in replacement white suction/ discharge PE tubing

S&F in replacement shaft and impeller for agitator motor (as per existing sample) complete all as specified and directed by Engr-in-charge.

S&F in replacement agitator motor single phase flange mounted complete all as specified and directed by Engr-in-charge.

S&F in replacement chlorine powder dosing pump of capacity 0- 20 LPH as per existing sample dosing pump complete all as specified and directed by Engr-in-charge.

S & F in replacement for LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F in replacement Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 15mm iron pipe complete all as specified and directed.

M & L for drilling hole in existing water mains of any type for tapping branch connections of 15mm dia including P.E Saddle tee of suitable size complete all as specified and directed.

Comprehensive maintenance and servicing of zero-B purifier up to 4 ltrs capacity in period of 45 days to make the purifier working to satisfactory condition complete all as specified and as directed. Note:- (a) Spares to be replaced will be measured and paid separately under respective items here in this schedule. (b) The rate quoted by the tenderer includes cost of maint/ serving of above said plant in a period of 03 months till the date of completion of work.

Supply only PU cartridges.

Supply only BAC cartridges.

Supply only PVC filler bags as per existing capacity

Comprehensive maintenance/servicing and testing of following RO plants including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set and dosing unit complete at so as to supply qualitative water at permissible level of TDS. Note:- (a)Spares required for replacement will measured and paid separately under respective items here-in-this schedule. (b) The rate quoted by the tenderer includes cost of maint / servicing of above said plant once in a period of 90 days till the date of completion of work. (c) Servicing should be done by OEM/authorized agency and not by any local mechanic (d) Contractor shall be produce all purchase voucher and test certificate before submitted RAR.

RO Plant 25 Ltrs capacity at Ahmedabad (No of plants -03 Nos)

RO plant 50 ltrs capacity at hanger Ahmedabad (No of plants – 01 No)

RO Plant 25 Ltrs capacity at SWAC HQ Main Guard Room chiloda (No of plants -02 No)

RO Plant 25 Ltrs capacity at CE AF Mess (No of plants -02 Nos)

RO Plant 25 Ltrs capacity at Chiloda MT area (No of plants -02 Nos)

RO Plant 25 Ltrs capacity at Chiloda CE single living area (No of plants -01 Nos)

RO Plant 25 Ltrs capacity at GE AF Office area (No of plants -01 Nos)

RO plant 50 ltrs capacity at 2AFSR sec-09 (No of plants – 02 No)

Supply only sediment filter as existing for 25/50 ltr RO plants. Make:- Aqua Guard/ Eureka Forbes / ION Exchange or equivalent as approved by GE.

Supply only RO membrane as existing for 50 Ltrs RO plant. Make:- Aqua Guard /Ureka Fobes /ION Exchange or equivalent as approved by GE.

Supply only RO membrane 80 GPD as existing 25 Ltrs RO plant. Make:- Aqua Guard /Ureka Fobes/ ION Exchange or equivalent as approved by GE.

Supply only RO membrane Housing as existing 50/60 to 25 Ltrs RO plant. Make:- Aqua Guard/ Ureka Fobes/ ION Exchange or equivalent as approved by GE.

Supply only carbon filter for 25/50 Ltrs RO plant. Make:- Aqua Guard/ Eureka Forbes/ ION Exchange or equivalent as approved by GE.

S&F in repair Spum filter for 50/60 Ltrs RO plant. Make:- Aqua Guard/Ureka Fobes/ION Exchange or equivalent as approved by GE.

S&F in repair PF candle for 50/60 Ltrs RO plant. Make:- Aqua Guard/Ureka Fobes/ION Exchange or equivalent as approved by GE.

Supply only 1/4" Pipe for 25/50 Ltrs RO plant

Supply only 1/2" Pipe for 60 Ltrs RO plant

Supply only low pressure / High pressure DC switch for 25/50 RO plant.

Supply only stainer for 25/50 Ltrs RO plant.

Supply only antiscalant chemical.

Supply only chloroscope (range-0.1 ppm to 2.0 ppm). Make:- Water chem / RAMCO or equivalent as approved by GE.

Supply only dosing pump safety box with lock and key arrangement.

Supply only solenoid valve for 25/50 lt RO plant. Make:- ION Exchange/Thermax/Eureka or equivalent as approved by GE.

Supply only booster pump 48 VDC suitable for50/60 Ltrs RO plant.

Supply only pump 36 V DC suitable for 25 Ltrs RO plant.

Supply only SMPS power supply suitable for 25 Ltrs RO plant.

Supply only control module for 25/50 RO plant.

Comprehensive maintenance and servicing of RO/Aquaguard purifier 8/10 Ltr capacity in a period of 4 months to make the purifier working to satisfactory conditions. Locations :- HQ SWAC – 01 No and Duty Crew room COMN FLT – 01 No and chiloda office area -12 and Billet area -10 Nos Note:- (i) Service should be done by OEM/authorized agency only. (ii) Contractor shall be produce all purchase voucher and test certificate or items before submitted RAR. (iii)Spares required for replacement will measured and paid separately under respective items here-in-this schedule.

Supply only UF cartridges for 8/10 Ltrs RO

Supply only sediment filter for 8/10 Ltr RO

Supply only carbon filter for 8/10 Ltr RO

Supply only pump for 8/10 Ltr RO

Supply only membrane 75GPD for 8/10 RO

Supply only solenoid valve for 8/10 Ltr RO

Supply only float cut off valve for 8/10 Ltr RO

Supply only PVC suction tubing flexible type for dosing pump. Make:- Crystal or equivalent.

Supply only injection valve up to 7 Kg pressure for chlorine dosing unit.

Supply only PVC filter for chlorine dosing unit.

Supply only PVC diaphragm with 'O' ring head for chlorine dosing.

Supply only PVC head for chlorine dosing pump.

Supply only suction valve up to 5 ltrs/Hr for chlorine dosing pump.

Supply only discharge valve up to 5 Ltrs /Hrs for chlorine dosing pump.

M&L for taking out old UNSV PCB of water purifier carefully, taken to workshop for repair/replacement and refixing the same and testing complete all as specified and directed.

M&L for repair of RO/ Aquaguard water leakage, removing of loose pipe, cleaning of tray clear all blockage, and refixing the same machine on wall and make proper connection and tesing complete all as specified and directed.

M&L 100 Ltr capacity chlorine use white drum. Make:- Sintex/Rotex/Polytuf/Suma or equivalent as approved by GE.

M&L 3/8" white suction/discharge tubing for dosing pump. Make:- Declibac /ALTOC/RAMCO or equivalent as approved by GE.

Supply & fix ferrule 1/4"(PK of 24) for dosing pump. Make:- Declibac / ALTOC/ RAMCO or equivalent as approved by GE.

S&F in repair to replacement of body of zero-B puriline water purifier of 4 Ltrs capacity including all accessories like PU cartridge, connecting pipe etc complete all as directed by Engr-In-Charge. Make:- ION Exchange/ Aquaguard/ Kent/ Marvel or equivalent as approved by GE.

S&F in repair in replacement of sponge sediment fiter 10". Make:- Eureka forbes/Ion exchange/Aquaguard or equivalent as approved by GE.

S&F in repair in replacement of carbon Block 10" Make:-Eureka forbes/Ion exchange/Aquaguard or equivalent as approved by GE.

S&F in repair in replacement of auto level sensor. Make:- Eureka forbes/Ion exchange/Aquaguard or equivalent as approved by GE.

S&F in repair in replacement of Non return valve suitable for dosing pump.

Supply & Fix in repair anti chlorine candle. Make:- Eureka forbes/Ion exchange/Aquaguard or equivalent as approved by GE.

Supply & Fix in repair anti scalant balls. Make:- Eureka fobes/ Ion exchange/Aquaguard or equivalent as approved by GE.

S&F in repair in replacement of FR switch suitable for existing RO plant. Make:- Aqua Guard/ Ureka Fobes/ ION Exchange or equivalent as approved by GE.

Dismantling, cleaning and over hauling of 0.25 HP centrifugal mono block pump set/pressure booster pump set of the following capacities including rewinding of motor with appropriate super enameled copper wire of existing gauge, replacement of bearing -02 Nos, including all connection and testing complete for following capacities :- (i) Replacement of bush (gland). (ii) Replacement of pump shaft. (iii) Replacement of impeller. (iv) Replacement of shaft sleeve. Note:- Suitable for RO plant Monoblock pump only.

All as per Item no.155 above, but 0.5 HP capacity pump complete.

M&L for collection of water sample from borewell & getting then tested from Govt. laboratry and furnishing test report, indicating chemical, and bactrological analysis including presrence of floride, TDS, Lead contents if any and submitted to the AGE E/M office and all as directed by Engineer-in-charge.

Comprehensive and maintenance servicing and testing of 400 Ltrs RO plant at Comm Flt Ahmedabad (No of plants – 01 No) including washing, cleaning of sedimentation filter, disinfection process, servicing of pressure pumping set and dosing unit complete at so as to supply qualitative water at permissible level of TDS. Note:- (i) Spares required for replacement will measured and paid separately under respective items here-in-this schedule. (ii) The rate quoted by the tenderer includes cost of maint / servicing of above said plant once in a period of 90 days till the date of completion of work.

Supply only cartridge filter 400 Ltrs RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only membrane 400 Ltrs RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only 400 ltrs UV system RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only 400 ltrs multi port valve. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only 400 ltrs high/low pressure switch . Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only tubing suitable for 400 ltrs RO plant . Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only filter media 400 ltrs RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only carbon media 400 ltrs RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only solenoid valve 400 ltrs RO plant. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only vertical pump. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only UV/LV lamp Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only water controller sensor. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only control panel. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only raw water pump. Make : Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only connector. Make : Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only CTO filter for RO. Make : Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only Bio Alkaine filter for RO. Make : Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only vessal. Make : Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

Supply only pressure tube. Make:- Aqua Guard/Ureka Forbes/ION Exchange or equivalent as approved by GE.

M&L for plumbing work at 400 ltr RO plant for connection of tubing pipes, stopping of leakage removing of old UNSV pipes etc complete all as specified and directed.

M&L for making of stand suitable as existing RO plant of cap 25 to 50 ltr, incl provn for fixing at wall or as per site requirement, complete necessary plumbing and other works and as directed by Engr-In-Charge.

M&L to repair in replacement of Digital LCD TDS meter tester water quality 0-1999 ppm PH test set filter purity mode with resolution 1 PPM. Make:- Noctronique model No CB45154 or equivalent as approved by GE.

(Note for srl item No 1 to 180 : - Mechanic will collect complaint from Eng-in-charge/JE E/M from any mode, complaints should be attended and rectified within 24 hr otherwise a penalty of rupees 2000.00 Rs per day per complaint will be recoverd from the contractor.

ALBA AC AND REF SERVICES

DIGNATION ENTERPRISE