PROVN OF FLOOR TILES , SUNSHIELD CANOPY, ADDN/ALTN TO FLAG MAST, RENOVATION OF FLOORING, SANITARY FITTINGS, REPAIR TO BOUNDARY WALL, PROVN OF WALL PANELLING ROOMS AND CERTAIN OTHER WORKS, PROVN OF FENDERS, AT CG JETTY, AT VERAVAL UNDER GE I CG PBR

Amount

SCHEDULE 'A'

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard / dense soil all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/dense soil all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L Broken stone or boulders Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (20mm graded aggregate) as in bedding layer of granite floors etc complete all as specified and as directed.

M&L Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in foundation bed filling and mass concrete all as specified.

M&L Plain Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in foundation blocks of posts filling and mass concrete all as specified.

M&L 75mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base of floors all as specified

M&L 15mm thick Rendering in CM 1:6 on stone masonary surfaces finished even & smooth without using extra cement.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per sqm.

M&L Pre-cast cement concrete block masonry type C1 (1:4:8) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified.

S&F 1st Class Hardwood clean sawn sleeper/ scantlings of approximate cross sectional area 225 Sqcm fixed along with edge of RCC Jetty floor rounded or chamfered edges.

S&F Woodwork to Jetty wood scantlings to floor with bolts of suitable size by drilling through wooden sleepr and RCC Jetty floor, drilled hole filled with epoxy resin material all as directed by Engr-in-charge. Note: Wooden scantling measured under item No. 13.00 above.

Plugging to Cement concrete block/Stone walls complete, for PVC fillets, grounds, moulding boarding, etc., at distances n exc 1m complete all as specified as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing on SSR Part-II.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing on SSR Part-II.

S&F MS Framed brackets of angles (Y-shaped) for fencing over security wall, cut to shape, drilled and counter stunk for screw including bending and welding angles etc. n.exc. 10Kg each brackets confirming to Fe Fe-290 Gde E-165 etc complete

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and wind ties of grade Fe 410W (Gde-E-250) quality-A

S&F Single stanchions as in vertical posts of tubular MS Pipe of 100mm dia medium with flange plates, caps, bases. Splices, angle brackets, cleats and other connections grade Fe 410W (Gde-E-250)quality-A

S&F Plates (plain or chequered) Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W on ends of posts etc complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc grade Fe 410W (Gde-E-250)quality-A

S&F Stainless steel hollow pipe of approved size as balusters, hanging SS Chain of approved size and pattern, Stainless Steel pipe for flag mast, of grade SS-316 with required hooks etc, fixed to floor using anchor fasteners with base plate etc. complete all as specified and as directed.

S&F Galvanized Iron chain weighing approximately 25Kg/RM and fittings such as D-shackle (minimum weight 1 Kg/Each Shackle), bolts, nuts, washers, etc of approved quality and design for fixing fenders to Jetty wall and including fixing the complete assembled rubber fenders with RCC wall of jetty through Iron Chain complete all as directed by Engr-in-Charge.

S&F Stainless steel Chain all along the saluting base SS Gde-304 complete all as specified and as directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws screws and also with J-type hook bolts for fixing of wind ties etc complete

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as spd.

M&L Granite tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing over screed bed or bedding layer of 15 mm thick 1:6 etc. all as specified and directed

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in In counter WHB,steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. all as specified and directed by Engineer in charge.

M&L Glazed coloured ceramic tiles in vertical surfaces 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed bed of CM 1:4 etc complete.

M&L Non skid ceramic tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM 1:6 complete.

All as per item No 31.00 above but on vertical surfaces/skirting including 10mm thick screed bed of CM 1:4 etc complete.

M&L Double charged Vitrified Ceramic Tiles Dark Shade 9 to 10mm thick (Square/Rectangular), area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick bedding layer in Cement Mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L Two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any des-cription, over 10cm in width or girth, not otherwise described

M&L Preparation of new/old plastered surfaces and applying two coats of weather proof acrylic exterior emulsion on walls over a coat of acrylic primer all as per the manufacturers instructions all as spd & directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm (rates includes for making good disturbed surfaces).

All as per item No 37.00 above, but 75mm dia.

S&F PVC (SWR) bends any radius of 75mm bore.

All as per item No 39.00 above, but 110mm bore.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed in repairs.

Supply and laying of CPVC pipes, of 16mm dia SDR -11 including plain CPVC SDR fittings for Hot/cold water for sizes (outer dia ) mentioned below including all fittings and solvents and special fittings like brass elbow, brass tee, male threaded brass adaptor, female threaded brass adaptor etc, Unions, Flange and tank adapter all asper manufacturers recommendations and as specified.

S&F 12 mm thick Toughned Glass Door with patch fittings with cover plate of SS-304 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450 MM suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed by Engineer-in-Charge.

S&F 12 mm thick Toughned Glass as in Partition with patch fittings with cover plate of SS316 Grade, necessay accessories etc, including cutting holes in any size in floor and wall, complete all as specified and as directed by Engr-in-Charge

S&F Wall Hung EWC Vitreous China of Make -CERA (CLAREMONT)(Cat Part No- S1043123) of Size-550x375x360mm including necessary nut/bolt for fixing, in repairs.

S&F Concealed PVC flushing cistern of Make-CERA (Cat Part No- 2620) with two open knob option and necessary fitting and fixtures complete all as specified and as directed by Engr-in-Charge in reapirs.

S&F Shower Panel 200 x 1500 mm made out of 5052 Grade Aluminium alloy body, thermostatic valve for regulating water temperature, overhead shower, hand shower and 4 body masage jets, diverter for shower arrangement and spout, hand shower with 1.5 m long hose with staineless steel finish complete all as specified and as directed. Make : CERA CONRAL PREMIUM (Cat Part No-B2530106) or equivalent.

S&F 15mm bore CP concealed diverter with single lever, tip ton knob and flange & concealed part Make CERA ( Cat Part No - CS-654E /F1006711 & F 4020101) or equivalent complete all as specified and as directed by Engr-In-Charge.

S&F PVC ACCORD FULL CABINET Set including following accessories complete all as specified and as directed by Engr-in-Charge. (a) Accord Mirror (Cat Pat No - 170114) (b) Accord Side Cabinet (Cat Pat No - 160121) (c) Accord Basin (Cat Pat No - 110527) (d) Accord Floor Mounted Cabinet (Cat Pat No - 160122) Make - SOMANY (ACCORD FULL CABINET SET) or equivalent

S&F WHB of vitreous china counter sunk size of 560x400mm including cutting for and pinning in ends of brackets or erecting stand in repair. Make -CERA (Cat Part- No S2030103)

S&F Wall mounted single lever Basin mixture with valve flange concealed single body of Make CERA (Cat Part No-CS 543) or equivalent complete all as specified and as directed by Engr-in-Charge in repairs.

S&F Toilet Roll Holder with flap, Make : Jaquor (Cat Pat No AQN-7753) or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs.

S&F Soap Dish Polycarbide, Make : Jaquor (Cat Pat No AQN-7733) or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs.

S&F Hand Shower (health faucet) 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hok with NRV (Back Flow Preventer) as approved by the Engr-in-Charge. Make- Jaquar (Cat Pat No- ALD-CHR-579) or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs

S&F Brass chromium plated swivel shower rose 450mm size including shower arm 450mm Make : Jaquor (Cat Pat No OHS-1989 and SHA-479L600) in repairs

S&F 15mm bore Bib Cock with wall flange quarter turn, Make : Jaquor (Cat Pat No ORP-CHR-10037PM or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs,

S&F Angular stop cock quarter turn with wall flange, Make : Jaquor (Cat pat No CQT-23059 or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs.

S&F Tubular towel rail, 60cm long between flanges, Make : Jaquor (Cat Pat No-AQN-7711) or equivalent, complete all as specified and as directed by Engr-in-Charge in repairs.

M&L Galvanised. 2 strand, steel barbed wire 2.24mm dia barbedwith 200dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. asdirected (each line wire to be measured) including two coat of epoxy paint (make: NEROLAC/SHALIMAR PAINTS/ JENSON & NICHOLSON/ ASIAN PAINTS or equivalent) and over one coat of primer all as specified will be directed by Engr-in-Charge.

S&F Galvanised iron (epoxy coated (Pre painted)) Concertina coil, punched tape manufactured from 2.60mm dia high tensile spring steel wire as per IS-4454, dia of each concertina coil @ 610 mm and the height of the coil when stretched shall be approximately @ 500mm, duly tied to barbed wire with and incl provision of steel clips @ 5 clips per spiral in one row and steel tape 19mm width as per IS-513 complete with18 micron zinc coating including removal of vegetation/bushes if any, surrounding the existing concertina coil/barbed wire placed over 'Y' Shaped angle, all as directed. Note: 1 Barbed wire will be measured & paid separately. 2. Contractor is reqired to submit test certification galvanising. 3. Each concertina coil to be expanded upto max of 6 mtr in length only.

Supply only "Hippo" brand rubber moulded CYLINDRICAL type fenders of size one meter long, with OD 300mm & ID 150mm and weighing approximately 74 Kg/each, as per approved design. Note: Foxing shall be done along with chain vide item No. 24.00 of BOQ.

S&F 'HIPPO' brand rubber moulded angle corner of size 75mmx75mmx10mmx1 mtr long

Dismantling old granite flooring or wall tiling incl cement mortar bedding removing serviceable tiles to store and rubbish off the premises.

Taking down Galvanised. Steel punched type concertina coil of 610mm dia

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Taking down chowkats or frames with shutters (without taking off shutters from frames) but size exc 1.5 Sqm & n.exc 4.00 Sqm each.

Taking down Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining complete all as specified and as directed.

Taking up or down PVC pipes, in any class, 75mm bore (including all fittings) including disconnecting pipes and fittings complete all as specified.

Taking up or down PVC pipes, in any class, 110 mm bore (including all fittings) including disconnecting pipes and fittings complete all as specified.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm dia

Taking down existing terminal box including, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.to be issued under schedule of credit.

S&F Modular switch 1 way, 6 amps, 1 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker).

S&F Modular switch 1 way, 16 amps, 1 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular socket, 6 Amps, 2/3 pin combined 2 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular socket, 6/16 Amps, 2/3 pin combined 2 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular fan regulator, 120 watt, 2 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular cover plate with frame, 3 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular cover plate with frame, 8 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker). Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular cover plate with frame, 12 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker)

S&F Modular metal flush box 3 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker) Note: Cutting and chasing in wall where ever required deemed to be included in unit rate.

S&F Modular metal flush box 8 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker) Note: Cutting and chasing in wall where ever required deemed to be included in unit rate.

S&F Modular metal flush box 12 module. Make: Legrand (Arteor)/ Schneider (Zencelo)/ Hanger (Berker) Note: Cutting and chasing in wall where ever required deemed to be included in unit rate.

S&F LED recess mounted luminaire,240V, 50Hz, Nominal Lumen output 1140 lm, PF>0.95, system efficacy 100 lm/watt, Square in shape, all as spd and as directed by Engineer-in-Charge In replacement . Make: Philips Cat No. SM250C LED 12S-650 PSU WH/ Wipro Cat No. - LD93-141-XXX-65-XX/ Crompton Cat No. LSDN-12-CDL/TL/WW

RUDRAAY CONSTRUCTION

M/S Rajendra Constructions

Vastushilp Building Designer