Supply, Installation, testing and Commissioning of Electrical expansion including 2500KVA, 11KV/0.433KV 3 Phase 50 HZ Power Transformer, VCB, HT & LT panel with all accessories at Dudhmotisagar Dairy- Dharuhera.

Basic Unit Price

11 KV HT PANEL (1 - OG) Located In LT Room. Supply, Unloading, Handling, Storing to desired place, installation and commissioning of indoor type, (As per BOQ)

Oil-filled transformer: supply, installation of 2500 kva, 11/0.433 kv transformer. (As per BOQ)

HT Cables & Terminations HT Cable Description: 3 core 300 sq. Mm Al arm (UE) (As per BOQ)

LT Cables & Terminations LT Cable Description: 3.5 core 400 sq. Mm Al arm. (As per BOQ)

Thimbles: Supplying and making Cable end termination of the following XLPE insulated PVC sheathed Aluminium / copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing testing and commissioning complete in all respect as required as per site conditions.

Main LT Panel (As per BOQ)

2X1000 KVAR APFC Panel (As per BOQ)

Bus Duct (To connect Old LT panel to New LT Panel) (As per BOQ)

Copper Earthing System (As per BOQ)

Gi Earthing System (As per BOQ)

Liasoning Work

All Documentation including Manuals, Drawings, P&ID etc. & Training

Total Price bid Amount ( Supply, Installation & Commissioning )

Work Description

1 Preparation, submission, and approval of Electrical SLD modification from CEI (Haryana)

for replacement of 1450 KVA transformer with 2500 KVA transformer.

Replacement of existing 1450 KVA transformer with new 2500 KVA transformer (old 1450

KVA transformer buy-back cost to be adjusted).: - 02 nos.

*Supply 2500KVA 11/0.433KV (Make: Crompton Greaves).OLTC+RTCC+AVR ONAN outdoor distribution transformer with all standard accessories as per IS 1180 & GTP Attached. Service charges for erection, oil filtration, testing and commissioning of 2.5MVA 11/0.433 kV, Distribution Transformer on Load Tap Changer +5% to -15% @ 1.25% Dyn11.

Modification of transformer bus duct and adapter from 2500 A to 4000 A as required for 2500 KVA transformer. 1) Retrofitting of 3WT 4000A, 4Pole ACB with Aluminum bus bar (150X10X3 run per phase & 150X10X2 run Neutral), HT Hardware, PVC Insulation Sleeve R.Y.B.N, Bus Bar Support, CT-4000/5A & Feeder wiring. (WITH MATERIAL). (2) Bus Duct Material: (MATERIAL WITH SERVICE) Aluminum bus bar 150X10, PVC Insulation Sleeve R.Y.B.N, Finger Support 3X0- 65nos., 2X10- 22 Nos., Finger Support Chanel-20Nos., MS Chanel-20 Nos, HT Hardware Normal Hardware. (3) Supply of Copper Flexible.

4 Replacement of HT VCB CT from 100/5 A to 150/5 A Job 1

5 New neutral and body earthing for 2500 KVA transformer. Job 1

6 Modification of Main LT Panel bus bar from 2500 A to 4000 A as required for 2500 KVA transformer.

Replacement of Main LT Panel ACB from 2500 A to 4000 A as required for 2500 KVA transformer (Supply of 3WT 4000A 4Pole EDO ACB. SIEMENS)

8 Replacement of Refrigeration Outgoing ACB from 2500 A to 4000 A as required for 2500 KVA transformer. (Supply of 3WT 4000A 4Pole EDO ACB. SIEMENS).

9 Modification of Refrigeration Outgoing ACB bus bar from 2500 A to 4000 A. (service with material)

10 Replacement of Power Factor Improvement (PFI) panel capacity from 400 kVAr to 800 KVAr TR-1 Panel & 500 kvar to 800 kvar TR-2 Panel).

11 Obtaining NOC from CEI, Haryana for installation of 2500 KVA transformer in place of 1450 KVA

12 Application and approval for extension of electrical load up to 3990 KVA from DHBVN, CE (OP) Office

Supply, Installation, Testing & Commissioning (SITC) of 3.5 Core × 400 sq.mm cable including termination, gland, and thimble.