Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹1.5 L
Closing Date
16 Nov 2026, 6:10 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Arvalli Panchayat Irrigation Division
Repairing and Maintenance Work for Bhanmer Minor Irrigation Scheme (Part-1: Dam Section Head Regulator & Waste Weir), Ta. Bhiloda, Dist. Aravalli
361480
TENDER NOTICE NO.8 OF 2026-27
Open
Civil Works
Works
Aravalli
17 documents required · 14 mandatory · 3 optional
₹3,600
EXECUTIVE ENGINEER ARVALLI PANCHAYAT IRRIGATION DIVISION MODASA
₹1.5 L
2 Nov 2026
2 Nov 2026
2 Nov 2026
16 Nov 2026
2 Nov 2026
120 days
BILL OF QUANTITIES
NAME OF WORK: Repairing & Maintenance Work for Bhanmer Minor
Irrigation Scheme (Part-1: Dam Section,Head Regulator & Waste Weir),
Ta. Bhiloda, Dist. Aravalli
SR COST PER UNIT AMOUNT (INR)
NO (Without GST) (Without GST)
1 Cleaning the slope of dam within
the dam boundry by removing the
bushes,shrubs girth and small trees
including depositing the materials
as and where directed up to 50 mt.
and all lift etc completed.
2 Cutting down the trees of different
girths, (at 45 cm above G.L.)
including removing & grubbing
roots below ground leval within the
canal boundary including stacking
the wood outside the canal
boundary as directed etc. complete.
(a) Girth above 0.50 & upto 1.00 m
3 Dismantling the existing foundation
concrete including sorting out the
dismentalled stuff and stacking the
useful material, removing the 7.20 Cum 1155.20
debries and making good the
damages etc. complete as and
where directed. Cement Concrete
4 Dismantling the existing stone
masonry including sorting out and
stacking the useful material and
removing the debries and making
good the damages etc. complete as
directed. In Cement Mortar
5 Dismantling the existing R.C.C. Pipes
including sorting out and stacking
of the useful materials of the
following diameters including 40.00 Rmt 866.40
refilling the trenches etc. complete
as directed. NP_2 pipes, 600 mm. to
6 Excavation for foundation in
overburden in all sorts of soil hard
murrum , gravel etc including
shoring , strutting and depositing
the excavated stuff in regular stacks
or layers with lead up to 500 mtr
and all lifts. (By Machinery)
including dewatering
SR COST PER UNIT AMOUNT (INR)
NO (Without GST) (Without GST)
7 Earthwork/Back filling with
selected earth brought from outside
borrow area or from excavated
useful material including spreading 9140.93 Cum 144.50
in layers, watering, compaction by
pnuematic/mechanical equipment
and all lead and all lift etc complete.
8 Providing and laying High Density
Polyethylene (HDPE)
Geomembrane (double side
textured) on bed/slope of the
earthen embankment, preparation
of subgrade in required line and
level including smooth finishing,
overlaps, welding etc., complete as
directed. (Thickness of HDPE
Geomembrane: 1mm, Double side
textured) with confirming to IS
9 Dismentalling the rubble pitching
including sorting out and stacking
of useful materials at site upto lead
200 mt. including removing the
rubbish as directed etc. complete.
23 cm Thick Pitching
10 Relaying of dry rubble pitching of
230mm thickness to required grade
including trimming of earth work,
hand packing the interstices with
spauls, filling earth in interstices
pannelling complete with stones`
obtained from dismentaled existing
pitching with all leads and lifts.
11 Providing and laying dry rubble
pitching of various thickness to
required grade including trimming
of earth work, hand packing the
interstices with spauls, filling earth
in interstices pannelling complete
for all leads and lifts. (a) 230 MM
12 Providing & Laying in position
"NOMINAL MIX" cement concrete
using cement, sand and crushed
aggregate by mass and machine mix
for C.C./R.C.C work incl. necessary
formworks centering, scaffolding,
compaction by vibrator, curing as
directed with all lead & lift etc
SR COST PER UNIT AMOUNT (INR)
NO (Without GST) (Without GST)
complete Without Dewatering and
excluding cost of steel
reinforcement. (a) C. C. Nominal
Mix, M-10 and MSA-40 mm
13 Providing & Laying in position
"NOMINAL MIX" cement concrete
using cement, sand and crushed
aggregate by mass and machine mix
for C.C./R.C.C work incl. necessary
formworks centering, scaffolding,
compaction by vibrator, curing as
directed with all lead & lift etc
complete Without Dewatering and
excluding cost of steel
reinforcement. (f) C. C. Nominal Mix,
M-20 and MSA-20 mm
14 Providing and fixing guard stone as
per I.R.C. type design including
white washing etc. complete.(ii)
Fixing in C.C. 1:5:10
15 Providing 300 mm thick pucca
rubble pitching in C.M. 1:5
proportion with the surface pointed
with cement mortar of 1:3
proportion etc. complete for all
leads and lifts.
16 Providing and fixing in position (
different diameter ) I.S.,NP-3 class
reinforced pipe with caulking the
joints with cement mortar 1:1
proportion,using jute string soaked
in cement slurry, finishing joints
and laying pipes to the designed
grade and levels, curing etc.
complete for all leads and lifts. NP-3
class 900 MM dia pipe.
17 Drilling holes 35 mm dia. Staggered
in all formations including rock for
low pressure grouting as per 391.00 Rmt 512.30
pattern shown on the drawing. For
18 Providing and fixing in position
m high above finished ground level
canal data boards standard size
1.20 m x 0.90m with M.S. angle
40mm x 40mm x 6mm with 3mm
thick iron plate in 1:5:10 proportion
concrete block size 40cm x 40cm x
75 cm including painting existing
SR COST PER UNIT AMOUNT (INR)
NO (Without GST) (Without GST)
data on the board etc.complete as
19 Fabrication of hoist platform
consisting of hoist girders with base
plate, cross members, chequered
plate and hand railing etc. complete
including cost of materials, cost of 0.97 0.00 96037.00
labour cutting, welding and painting
with one coat of primer paint, jigs
fixtures etc. comp. as per drawing
and specification.
20 Providing and fixing the iron rod for
steel gates including providing big
size thread and finishing as 8.00 Rmt 2229.60
required etc comp (c)- dia of bar
21 Providing & Placing in position
reinforcement bars including
cutting, bending, welding joints
where necessary, hooking etc.
complete as per drawing for all lead
and lifts. TMT / CRS (FE 500 D)
22 Providing and supplying ISI Mark CI
D/F Sluice valves of following class
and diameter incl. Tail piece, all
taxes, Insurance, transportation,
freight charges octroi, inspection
charges, loading, unloading,
convenyance to dam site , stacking
with all labour work inci. lowering 1.00 No. 235268.00
laying and jointing, welding, cement
concter work with removing
existing sluice valve / gate etc
complete (A 3) Sluice valve with IS1
mark only, PNI with hand/whcel
cap operated ALT-1 Type Long
Body 600mm Dia.
23 Providing Fabricating and erecting
a steel ladder M.S. Angle 50 X 30 X
mm in the H.R. well as per design to 9.00 Rmt 1201.60
approach the H.R. gates from top of
H.R. well etc complete as directed
24 Providing and fixing M. S. steel grill
with angle frame for head regulator
including fixing arrangment
supports. etc. as per design, oil 0.14 MT 71013.00
painting with one coat of primer
and two coat of approved oil paint
SR COST PER UNIT AMOUNT (INR)
NO (Without GST) (Without GST)
25 Construction and Dismantling of
26 Providing and fixing 5mm thick
enamelled gauge plate including
necessary gradation in white and
blue etc. complete. 10 cm wide
27 Deepening of tank in all type of soil
with yellow, sandy, gravelly soil
including wet and slushy condition
of soil including soft murrum &
hard murrum by machinery 29150.00 Cum 82.60
including conveying and spreading
excavated stuff as & where directed
with lead up to 1.00 km and all lift
Total Cost (Rs.)
I/We am/are willing to carry out the work at……...................... % above/below percent
(Should be written in igures and words) of the estimated rate mentioned above. Amount
of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Contractor Executive Engineer
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Jaher Nivida No.8 2026-27.pdf
BHANMER FINAL DTP.pdf
BOQ BHANMER.pdf
Bhanmer Corrigendam final.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .