Day to Day Maintenance and Improvement/Repair/Laying and Fitting of pipes for extension/Restoration of water supply scheme of minor urgent nature of works and execution of small petty works, Repair and renovation of civil structures with allied works

Amount

Earth work in excavation by manual means in tranches for foundation, drains, pipes, cables etc. (Not exceeding 1.5m in width) and for shafts, wells, cess pits and the like not exceeding 10 Sqm on plan, depth upto 1.5m, including disposal of excavted earth upto 1 mtr from cutting edge, disposal earth is to be levelled and neatly dressed in: all kinds of soils.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50m, disposal earth is to be levelled and neatly dressed in: all kinds of soils.

Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and left upto 1.5mtr.

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Dismantling of G.I.pipe (external work) incl. excavation and refilling trenches after taking out pipes manually/by mechanical means incl. stacking of pipes within 50mtr lead:

a) 15mm to 40mm nominal bore

b) Above 40mm nominal bore

Deployment of extra fitters/Mazdoor for restoration of damaged G.I.pipes, rethreading of pipes, locating/traces of blockages/leakages and Cleaning of Dugwell/GSR/OHT.

A) Mazdoor

b) Fitter

c) Painter

d) White Washer

e) Blacksmith (Welder)

f) Carpenter

g) Mason

Laying & Fitting of G.I.pipes complete excluding cost of pipes and earth work.

15mm dia G.I.pipe

20mm dia G.I.pipe

25mm dia G.I.pipe

32mm dia G.I.pipe

40mm dia G.I.pipe

50mm dia G.I.pipe

65mm dia G.I.pipe (L)

65mm dia G.I.pipe (M)

80mm dia G.I.pipe (L)

80mm dia G.I.pipe (M)

100mm dia G.I.pipe (L)

100mm dia G.I.pipe (M)

Providing ,Laying & Fitting of G.I.pipes complete excluding cost of earth work and refilling

15mm dia G.I.pipe

20mm dia G.I.pipe

25mm dia G.I.pipe

32mm dia G.I.pipe

40mm dia G.I.pipe

50mm dia G.I.pipe

65mm dia G.I.pipe (L)

65mm dia G.I.pipe (M)

80mm dia G.I.pipe (L)

80mm dia G.I.pipe (M)

100mm dia G.I.pipe (L)

100mm dia G.I.pipe (M)

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)

20 mm dia nominal bore

25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

65 mm dia nominal bore

80 mm dia nominal bore

Fixing/replacement of CI Sluice valves/Check valves/ Gun Metal Valve complete with bolts, nuts, rubber insertions etc. (Sluice Valves/Check Valves to be supplied by the department)

150mm dia Nominal Bore

100mm dia Nominal Bore

80mm dia Nominal Bore

65mm dia Nominal Bore

50mm dia Nominal Bore

Making connection of G.I.distribution branch with G.I.main of following sixes by providing and fixing Tee, incl. cutting and threading the pipe etc. complete.

25 to 40mm nominal bore

50 to 80mm nominal bore

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Providing and fixing of G.I union in G.I pipe including cutting and threading the pipe and making complete job (New work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Providing and fixing of G.I union in existing G.I pipe line including cutting and threading the pipe and making long screw incl. excavation and refilling the earth and making the good the same complete

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65 mm nominal bore

80 mm nominal bore

Fabrication/welding of joint

Providing & laying in position cement concrete of specified grade excluidng the C/o centring & shuttering all work upto plinth level in 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggr. 20mm nominal size (Crusher)

Providing & laying in position cement concrete of specified grade excluidng the C/o centring & shuttering all work upto plinth level in 1:4:8 (1 cement: 4 coarse sand:8 graded stone aggr. 20mm nominal size (Crusher)

Providing & laying in position cement concrete of specified grade excluidng the C/o centring & shuttering all work upto plinth level in 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggr. 20mm nominal size (Crusher)

Providing & laying in position cement concrete of specified grade excluidng the C/o centring & shuttering all work upto plinth level in 1:1.5:3 (1 cement: 1.5 coarse sand:3 graded stone aggr. 20mm nominal size (Crusher)

Reinforced cement concrete work in arches, archribs, domes, valults, shells folded plate & frros having slope more than 15 upto floor five level excl. the C/o centring, shuttering, finishing & reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggr. 20cm nominal size)

Reinforced cement concrete work in wall (any thickness), incl. attached pilasters, buttresses, plinth and string courses, fillets, coloumns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggr. 20mm nominal size (Crusher)

Centering and shuttering including strutting, propping etc. and removal of form for

a) Foundation , footings bases of columns etc for mass concrete

Extra for shuttering in circular works

b) Walls ( any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Extra for shuttering in circular works

c) Suspended floors, roofs, landings, balconies and access platforms

d) Shelves (cast in situ)

e) Lintels, beams , griders , bresumers and cantivelrs

Extra for shuttering in circular works

f) Columns , Pillars , Piers , abutments, posts and struts

g) Stairs (excluding landings) excpet spiral staircases

h) Spiral staircases (including landings)

i) Arches , domes vaultes upto 6 m span

Extra for shuttering in circular works

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finish with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate crushed

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in-charge

1:3:6 of richer mix

1:4:8 of richer mix

Demolishinmg RCC work manually/by mechanical means incl. stacking of steel bars and disposal of unserviceable material within 50mtr lead:

Dismantling manually / mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in charge)

a) Water bound macadam road

b) Bituminous road

Dismantling Old Plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead

Demolishing RCC work by mechanical means & stckpiling at designated locations & disposal of dismantled materials upto a lead of 1 Kilometer, stacking serviceable and unserviceable materail seprately including cutting reinforcement bars

Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S guesst plates at the junctions and corners, all necessary fitting complete, inclduing applying a priming coat of approved steel primer

a) Using M.S angles 30x6 mm for diagonal braces and central cross piece

Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete (TMT)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. Old steel work (One or more coats)

Colour washing such as green blue or buff to give an even shade. New work (two or more coats) with a base coat of white washing with lime

15mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)

15mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)

Finishing walls with water proofing cement paint paint of required shade. Old work (One or more coat)

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. Meters and under, including cutting the patch in proper shape ranking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 coarse sand)

White washing with lime to give and even shade on New Work (three or more coats)

Edges of slabs and breaks in floors and walls

Carriage of sand from nearest source to site of work incl. loading, unloading and stacking complete (To be paid as per actual distance involved at site): Sand average distance 50Km by M.T.

Stone aggregate 40mm and above nominal size average distance 20Km by M.T.

Stone aggregate below 40mm nominal size average distance 20Km by M.T.

Cement/Steel average distance 20Km by M.T.

Sand average distance 1000 mtr H.L.

Stone aggregate 40mm and above nominal size average distance 1000 mtr H.L.

Cement average distance 1000 mtr H.L.

Steel average distance 1000 mtr H.L.

Carriage of GI pipe incl. loading, unloading and stacking complete (20 km by MT)

Carriage of GI pipe incl. loading, unloading and stacking complete (500 m by HL)