annual maintenance four madas at Tirumala for 2026-27

Supply of best river sand for mortar and stacking to department gauge for pre- measurements including cost and conveyance of all materials , incidenal charges etc., complete as directed during execution.

Supply of bricks 2nd class or ground Moulded ( Non Modular or Traditional size) of 230 x 110 x 70 mm including cost and conveyance of all materials as directed during execution etc., complete.

Supply of cement including cost and conveyance etc., complete

Supply of Two Parts system of Epoxy Bonding adhesive Conforming to ASTM-C 881

Supply of High strength non-shrink cementitious micro concret

Supply of Welding elctordes M.S

Supply of welding electrode 4 mm dia x 450 mm ( stainless steel )

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead. Brick work

Demolishing and disposal of unserviceable materials within 100 metres lead . Unreinforced cement concrete up to 15cm thickness

Providing and laying of Hot applied Thermoplastic Compound 2.5 mm thick including with Reflectorising Glass Beads @ 250gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied Glass Beads as per IRC:35, including cost and conveyance of material, labour charges, hire charges of machinery, for finished item of work. The material should be of BERGER make (as per MORTH 803). The finished surface to be level, uniform and free from steaks and holes as per specification 803 MORTH. --do- on Cement Concrete pavement surface

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational,incidental,labour charges such as shoring,sheeting,planking,strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.,SS20B -Ordinary soil-Manual means upto 3m depth.

Filling of foundations and basement with best river sand in layers of not more than 15 cms.thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Plain Cement Concrete (1:4:8) using 40mm (0.54 cum) and 20mm (0.27 cum) and 12mm (0.09 cum) HBG crushed metal from approved quarry for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete.

Plain Cement Concrete (1:2.5:5) -Grade M15 using 20mm (0.54 cum) and 12mm (0.36 cum) HBG crushed metal from approved quarry for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete.

Random Rubble masonry in CM (1:6) using granite stones from any source confirming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (excluding cost of bond stones )

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

- do- in C.M( 1:3) 12mm thick

- do- in C.M( 1:5) 12mm thick

- do- in C.M( 1:5) 20mm thick

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402)

- do-RCC M20 Design mix precast slabs 50 mm thick

- do-RCC M20 Design mix precast slabs 80 mm thick

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of below 36 mm Fe 500/Fe-500D specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Supply of glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Flooring with 1st quality Ceramic floor tiles of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work

- do - 1st quality Polished Ceramic floor tiles of size not less than 600 x 600 x 8 mm thick of all shades & designs (Group B II of IS 15622 -2006, water absorption should be between 3 to 6%)

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

- do - Supply of Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Supply, fixing and Painting of MS tubes & Pipes of all diametres as per IS-1161 inlcuding cost and conveyance etrc complete as directed during the execution of the work. Including Labour charges for fabricating steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges including cost of fixing in position. including painting the grills with two coats over a primary coat (total three coats) with synthetic enamel paint of approved make and colour etc., complete

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of M.S. Tubes & pipes of all diametres as per IS-1161. (TATA/ SAIL/ VSP/ JINDAL shall be used)

Supply of Angles , channels etc., complete as directed during execution.

Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of fixing in position (unit- 1kg).

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of Best Teak wood scantlings up to 2 mts.

Supply of Best Teak wood planks any thickness

Labour charges for wrought and putup for wood scantlings.

Supply of PLY WOOD-IS Moisture Resistant (MR) Grade

-do- 9 ply- 12 mm thick plywood

-do-9 ply- 18 mm thick plywood

-do-5 ply- 8 mm thick plywood

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600mm x 600mm using 12.5mm thick Gyp Board sheet tiles of size 595mm x 595mm or 595mm x 1195mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25mm x 25mm x of 0.70mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610mm c/c and suspending the frame work using precoated GI Tee section (24mm x 38mm x 0.7mm) from soffit at 1220mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200mm c/c and fixing the 12.5mm / 9.5mm Gypboard Sheet tiles of size 595mm x 595mm or 595mm x 1195mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification. BLD-CSTN-8-32.

Supply of Anodised Aluminium Aldrop sliding door bolts -16mm x 300mm

Supply of Anodised Alluminium tower bolts 10mm X 200mm long with ISI Mark IS 204 .

Supply of Anodised Alluminium tower bolts 10mm dia 150mm long with ISI Mark IS 204 ".

Supply of Anodised Alluminium tower bolts 10mm dia 100mm long with ISI Mark IS 204 .

Supply of Anodised Alluminium Door handles IS 208 -10 mm rod with 100 mm long.

Supply of Anodised Alluminium Door handles IS 208 -125 mm long.

Supply of Heavy Duty Alluminium Door stopper.

Supply ofAnodised Aluminium Butt hinges IS 205-100 mm long

Supply ofAnodised Aluminium Butt hinges IS 205-125 mm long

Supply of Putty for wood work.

supply of Turpentine.

Supply of Country Nails.

Supply of French polish.

Supply of Fevical / wood adhesive compound.

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC (volatile organic compound) content less than 50 grams / lit.

Supply and fixing of sun control film for glazed windows, partitions including labour.

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-2: for width of doors 701 to 850 mm).

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Florentine(Quarter) series, Chrome Finish with 7 years warranty.

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden block.550 x 400 mm - Single C.P. Pillar cock.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS: 2556 - Part -3-1981 with "P" or "s" trap Hind ware/Parry ware/Neycer - ISI Mark 580x440mm.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan/Neycer/parry ware make white glazed with 'P' trap with ISI mark or equivalent approved by the department.

Supply & fixing of PVC low level systern with internal components & short bend. 10 liters capacity single flush.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996.

Providing Unplasticized PVC SWR Rain water downfall pipes 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

supply & fixing of 110 mm dia single socket pipe of PVC /SWR pipes & fittings (as per ISI standards) 6kg/cm2 approved make with ISI standards.

supply & fixing of 75 mm dia single socket pipe of PVC /SWR pipes & fittings (as per ISI standards) 6kg/cm2 approved make with ISI standards.

Supply of 304 grade Stain less steel fly proof wire mesh of 26 gauge.

Labours required for various miscellaneous works as and ariving during the execution of the work.

Mason/ carpenter/painter/stone cutter/ plumber 2nd class labour.

For maintenance

Supplying and fixing in position 600 x 450 mm size wall mirror 5 mm thick glass (Saint Gobion) with 6 mm plywood IS 303 bwr (both sides commercial) back in position with 12 mm Aluminium 'U' channel (Jindal make) including cost and conveyance of all materials etc., complete.

Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminium glazed partitions using 10MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5.00 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.

Hire charges for engaging tractor for shifting of department materials to the specified places as directed during execution.

Hire charges for engaging welding set making welding to the specified places as and when required by the department.

Supply of Flush door Shutters, solid bond wood block board type with commercial ply on both faces conforming to IS:2202 of approved make - 30 mm thick.

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- single coat for old Iron work & old plastered surface.

-do- Single coat for old wood work

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

-do- Single coat for old work

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

-do- Single coat for old work

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Conveyance of the excavated earth from work spot with lead of 2.00 km including loading and unloading etc complete.

Vinyl Flooring Sheets or tiles having a nominal total thickness of 1.5 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards

Hire charges of the core cutting machine, fuel charges etc as directed during the execution of the work

Supply of G.I wire 16 Gauge for tying of the chain links and grills, gates etc.

SPECIALISED ACRYLIC CEMENTITIOUS ELASTOMERIC WATERPROOF COATING TREATMENT Complies with ASTM C 297 : Providing and Application of two coats of Acrylic cementitious elastomeric waterproof coating with - ROOFCOAT (Armstrong) POWER n COAT (EBT)/ BRUSHBOND (Fosroc )ZORICOAT (PMCC)/SIKA TOPSEAL 107 (Sika) /WATERSHIELD COAT PC like high elastomeric acrylic polymer modified cementiitious waterproof system WHERVER HIGH FLEXIBLE HIGH BONDED NECESSARY FOR WATERPROOFING OF TERRACE / SLOPED ROOFS / ACC SHEETS etc., FOR A GUARANTEE OF 5 YEARS REFER THE RATES FOR CLEANING AND CRACK FILLING UNDER THE HEAD OF THE WORKS

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Three track three panels sliding window with fly proof SS wire mesh(Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Rupees Sixty Seven Lakh(s) Thirty Six Thousand Four Hundred Sixteen And Paise Sixty Three Only