Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.7 LAccepted-AOC | ₹9.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹10.4 L+₹70,852.01 (7.33%)Rejected-AOC | ₹10.4 L+₹70,852.01 (7.33%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | Shaji Mani L2 | Shiji George L1 |
|---|---|---|---|---|---|
| 1.00Ward-12 Anganwadi No.20 | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 4.46 | cum | 262.78 ₹1,173.05 | 244.74 ₹1,092.52 Lowest |
| 1.00 | OD134891/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good
quality blasted rubble including packing to compactness to lines and levels cost and conveyance
of all materials labour charges etc. complete as per direction of Departmental officers at site | 8.61 | cum | 4,073.32 ₹35,087.58 | 3,793.78 ₹32,679.62 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.16 | cum | 9,420.68 ₹10,909.15 | 8,774.17 ₹10,160.49 Lowest |
| 1.00 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | 6.6 | sqm | 778.13 ₹5,135.66 | 724.73 ₹4,783.22 Lowest |
| 1.00 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 3.4 | cum | 7,867.81 ₹26,766.29 | 7,327.86 ₹24,929.38 Lowest |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 111.93 | kg | 181.98 ₹20,369.02 | 169.49 ₹18,971.02 Lowest |
| 1.01 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 47.32 | sqm | 809.89 ₹38,323.99 | 754.3 ₹35,693.48 Lowest |
| 1.01 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 23.66 | kg | 862.85 ₹20,415.03 | 803.64 ₹19,014.12 Lowest |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 7.2 | kg | 783.13 ₹5,638.54 | 729.39 ₹5,251.61 Lowest |
Tender Value
₹10.2 L
EMD Value
₹25,422
Closing Date
8 Sept 2025, 6:00 pmClosed
ASSISTANT ENGINEER
LIDEW KOTTAPPADY
KTPDY-102/26-Maintenance of Anganavady Number.18,19,20,26,28
2025_LSGD_793172_1
10/AE/LIDEW/KTPDY/2025-26
Open Tender
Civil Works - Buildings
Item Rate
270 days
KOTTAPPADY
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,760
Yes
₹25,422
Yes
24 Oct 2025
1 Sept 2025
10 Sept 2025
1 Sept 2025
8 Sept 2025
1 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .