SPECIAL REPAIRS TO UNIT COOK HOUSE, SANITARY AREA OF BLDG NO 84 OF 06 ADV FD HOSPITAL INCLUDING CERTAIN SANCTIONED WORKS AT GE WEST BAREILLY

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 Sqm but n.exc 4.0 Sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each including iron mongries, hold fast etc and removing to or from store complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube fixed in opening as per specifications and drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled stainless steel Butt hinges with steel screws complete all as specified and directed.

S & F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F Pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for PCC (1:3:6) type C0, (using 12.50 mm graded stone aggregate) as in pressed steel frame complete all as specified and directed.

S & F Rolled Mild Steel angles, bars, flats etc, as in supports for stiffening of fencing, wall tiles, hold fasts, clamps and similar small articles confirming to Fe-410-O or Fe 310-O complete all as specified and directed.

M&L for Plain Cement Concrete Type C1 (1:3:6) (using 20 mm graded stone aggregate) for embedding of holdfast complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

S&F factory made 2nd class hard wood shutter 35mm thick plain framed, panalled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated completed all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with out mitred beads for securing glass etc as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws or by welding etc complete all as specified and directed.

S&F 300mm long ordinary rat rail pattern springs including roller and roller plate complete all as directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed.

S & F 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

Supply only 50mm size mild steel butt hinges medium weight.

S&F of 2nd class hardwood small fittings such as brackets of any type hinge blocks,shaped door window stops and the like including all necessary labours articles n.exc 200cu. cm each completed all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, without glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutters including hinges, steel peg stay, complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match with the shade coloured tiles completed all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid on floor surface jointed and pointed with coloured cement over complete all as specified and as directedby Engineer-in-Charge.

M&L for 15 mm thick Screed bed or bedding layer for laying floor finishes in CM (1:6) completed all as specified and directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed.

M&L for 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished completed all as specified and directed.

M & L for rubber moulded chequered cement concrete tiles of size 300X 300 X 25 mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor and laid over 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes finished even and rough complete all as specified and directed.

M&L for 15 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM (1:4) incl pointing in white cement(1:2) using marble dust with admixture of pigment to match with the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) complete complete all as spd and directed

M&L for providing machine cut polished Kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes finished even and rough complete all as specified

All as per item No 44 but in narrow width of vertical surfaces.

Taking down cement or cement lime plaster from brick or stone walls etc. including removing vegitable, small growing tree, raking out joints, hacking for keys, scrubbing down with water including internal and external surfaces of manholes, septic tanks, etc).etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair incl racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair with WPC (WPC will be measured and paid saperately) all as specified and directed complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for rendering 10 mm thick rendering in CM (1:3) on ceiling/Man holes finished even and fair complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preperation of new wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls over a coat of primer all as specified & directed by Engr-in-Charge.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of 3 mm thick wall putty complete all as specified and directed.

M&L for preparing old surfaces of walls (old decorated plastered or unplastered) and applying two coats of white wash complete all as specified and directed.

M&L for preparing old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

S & F Stainless Steel curtain rods 32 mm dia with bracket and ends etc fixed in repair complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM not exceeding 10 cm girth complete all as specified and directed.

S & F in replacement 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down of existing pipe complete all as specified and directed.

S & F in replacement 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down of existing pipe complete all as specified and directed

S & F in repairs soap dish, brass chromium plated fixed to wall complete all as specified and directed.

S & F in repairs brass chromium plated towel rail 60 cm long fixed to wall etc complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fix PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.

S&F plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC connection for 15mm size pipe 450 mm long with PTMT nuts complete all as specified and directed.

ditto as per above item but 600 mm long

S & F in repairs 15 mm bore CP Brass fancy pillar taps, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F 15 mm bore CP Brass fancy pillar taps, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) floor tarp, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs 15 mm bore CP Brass Stop valves (straight or angular), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 15 mm bore CP Brass Stop valves (straight or angular), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, rain water pipes, drainage pipes single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including fittings, heads, shoes, bends, swan-necks, etc and removal to store complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes, rain water pipes, drainage pipes single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including fittings, heads, shoes, bends, swan-necks, etc and removal to store complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 125mm dia circular grating stainless steel chromium plated fixed on trap loose or with CM (1:3) complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

Cutting down existing tree or bushes any girth on roof / wall of buildings , grubbing roots including necessary cutting and filling holes with cement mortar (1:6) or PCC (1:2:4) type B-1 making good disturbed portion of brick work and cleaning site complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

M&L providing precast cement concrete (1:2:4) type B-1 in cover slabs (for manholes etc ) ,shelves and similar articles with plain faces set in cement mortar (1:6) completed all as specified and directed.

M&L TMT bars 6 to 8mm dia cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified

ditto as per above item but 10 mm dia and over

M&L for reinforced cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in slab support on walls, beam and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Demolition of cement concrete in any position in any description complete all as directed

Providing PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even amd smooth without ung extra cement. Including S&F 75 mm wide and 3 mm thick glass dividing strip inserted in position at every one meter and change of direction including finished surface cum & smooth without using extra cement complete.

Demolition of cement concrete (un reinforced) in ground floor or pavings of any sidescription n exc 15 cm thickness (below or above ground level)

M&L for 25mm thick plain Cement Concrete Type B-0, 1:2:4 (using 20 mm graded stone aggregate) as in floors etc complete all as specified and directed.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tank exc 250 ltr but n.exc 500 ltr capacity all as specified and directed.

S & F 1000 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tank exc 500 ltr but n.exc 1000 ltr capacity all as specified and directed.

S&F 15 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including all fittings complete all as specified & directed.

S&F 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including all fittings complete all as specified & directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density ball (minimum weight 210 gms) screwed for iron pipe and fixed complete including all fittings all as specified and directed.

S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density ball (minimum weight 210 gms) screwed for iron pipe and fixed complete including all fittings complete all as specified and directed.

Demolition of brick or stone/boulder masonry, built in cement mortar incl copping.

M&L for plain cement concrete (1:4:8) type D2 using 40mm graded aggregate as in foundations, filling and mass concrete completed all as specified and directed.

M&L cement concrete (1:2:4) type B-1( 20 mm graded stone agg. )in surface channels and drains

M&L for providing cement concrete type B1 (1:2:4) (20mm graded stone aggregate) as in copings.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl moulds, forms, mitred/stripped ends complete

Add or deduct to above mentioned item No 102 hereinbefore for each 25 mm girth or part thereof over or under 30 cm girth all as specified.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in bitumin primer and bitumen.

M/L plain cement concrete (1:2:4) type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by Engr-in-charge at site.

M&L for 10mm thick rendering on fair faces of concrete surfaces in CM (1:4) with water proofing compound @ 200ml per 50 Kg of cement and incl demo of old plaster on concrete surface complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly)

Supply & providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100micron HMHDPE film centre core including coating the surface with the bitumen 85/25 @ 1.20 Kg/Sqm and torch application of membrane with 10cm overlaps and longitudinal edges 15 cm at the ends and cutting grooves in wall for inserting tar felt if required complete job as per requirement as required thereof, complete all as specified & directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or steel hanging door fitting and also fastening complete all as specified and directed.

S & F of rolled mild steel joist, channel, angle, flat iron or Tee sections, fixed independently without connecting plates etc. (cut to ordinary length i.e. within 20 mm of length) confirming to Fe-290 (Gde E- 165) complete all as specified and directed.

S & F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . NOTE:- Corrugated shape of sheet shall be approved by GE

M&L for removing loose/weak concrete materials with wire brushing cleaning with water allowed to dry on ceiling, fins, facias, lintels, beams etc and applying cement slurry 3.00 Kg/Sqm by brushing and fixing of chicken wiremesh of mesh size 25mm to 50mm, dia of wire 1.00mm to 1.40mm fixed with steel screws and then guinite 25mm to 50mm cement concrete type B-0, 1:2:4 (4.5 to 6mm stone chips) in two or more layers and than applying 5mm thick rendering in CM 1:3 and finished even and fair and then applying three coats of white wash including necessary form work and scaffolding as in ground floor (height upto 3.50 Mtr) complete all as specified and as directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L for Brickwork with fly ash bricks old brick size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M & L for Brick work with fly ash bricks old brick size, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M & L for Brickwork with flyash old bricks size, straight or curved on plan to any radius i n half brick thick walls, built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M & L for damp proof course to horizontal or vertical surfaces including necessary formwork, 40mm thick, in cement concrete 1:2:4 type B0 complete all as specified and as directed by the Engineer-in-Charge

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement internal

M & L for Joint free Glazed Coloured Ceramic tiles in vertical surface of size 450x300mm & 7-8mm thick set and joint in neat cement slury and pointed in white or colour cement to match including rendering 10mm thick in cement plaster 1:4 finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC 1(:2:4) (Using 20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M&L for RCC (1:2:4) (Using 20mm graded stone aggregate) in chhajjas complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges

S & F Aluminium Powder coated (Colour) section for in door, window, Ventilator, glazed with aluminium shutter weighting 0.55Kg/M including 2nos matching handle necessary fitting of suitable size , one or more rebates, cut to jointed together with cadmium lated steel screws including rubber bending of gasket for aluminium section for fixing glass/jali and necessadry fitting, screws plugs for fixing screws etc complete and all as specified or as directed by Engr in charge

S&F for colour powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination complete all as specified and directed.

S&F for 4mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 sq. m in each pane

Ditto,all as per item No 137 but exc 0.5 sq. m in each pane

S&F for Aluminium alloy, anodised,sliding door bolt 300mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F wash hand basin vitreous China flat back 550x400mm size white, make Regal of Hindware Cat Part No 10054 including pedestal of Cat part No 11018 or Equivalent in Parryware including PVC waste coupling 32mm size, PVC corrugated waste pipe 32mm bore, pair of brackets of mild steel 35 x 35 x 6mm size complete all as specified and directed by Engineer-in-Charge.Make: HINDWARE/PARRYWARE/ FOR WHB, PRAYAG FOR PVC FITTINGS.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC flushing cistern 10 liters low level, PVC pipe connection suitable to joint flushing cistern to water closet fixed on 'P' or 'S' trap, lime concrete bedding complete all as specified and directed by Engineer-in-Charge.Make: HINDWARE/ PARRYWARE/ CERA

S& F for PVC connections 15mm size with PTMT nuts of length 450mm

S&F stop valve/angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore make Jaguar

S&F for 15 mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore make Jaguar all as specified or as directed.

S&F for Soap dish, vitreous China white, approximate size 160x160x90mm

M&L for Green/black Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types including cutting and moulding of green/black marblein oval shaped to accommodte for WHB or Urinal pot complete all as specified of as directed by engr-in-charge

S&F for CP brass Tubular towel rail 20mm with one pair of CP Bracket dia

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified or as directed.

S&F for PVC (SWR) pipes 100/110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F for PVC (SWR) bends 100/110mm dia any radius

S&F for PVC (SWR) bends 75mm dia any radius

S&F for PVC (SWR) junction single/double equal or unequa 75mm dia

S&F for PVC (SWR) junction single/double equal or unequa 100/110mm dia

S&F for PVC (SWR) vent cowl 75mm dia

S&F CI soil waste and vent pipes 100mm bore size sand cast in any length with or without ears with cement joints laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F cast iron bends any radius, dimishing pieces or traps 100mm bore size complete all as specified and directed by Engineer-in-Charge.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting and chassis the wall.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick water proofing plastering on flat/sloped surfaces on RCC roof whilest concrete is still green in CM 1:3 finished even and smooth complete all as specified.(water proofing will be paid for seprately).

Supply and fix bib taps 15 mm bore chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make-Jaquar(Queens) all as specified and as directed by Engineer-in-Charge.

M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 150mm dia pipes.

S&F 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed including connect to septic tank and soak well as specified

S&F Salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ complete all as specified and directed by Engineer in charge.

M&L for Sand filling under floors or in foundations including watering and consolidation including spreading under interlocking paver as specifeid and directed

M&L for construction of brick masonary septic tank for 10 users capacity, with and including necessary excavation, earth work, brick work, concrete work, plastering, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No. 217 & specification (without sluice valve and sludge chamber) complete all as specified and directed.

M&L for construction of soak well 1.2 mtr dia and 3.0 mtr effiective depth with and including necessary excavation, earth work, brick work, plastering, filling with brick bats, PCC on top, returning filling in soft/loose soil and removal of surplus soil to a distance n exc 50 mtr etc complete all as shown in typical drg No. 309 & specification complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 630x450 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

S&F in repairs fancy type brass chromium plated with long shank and cup (concealed type) 15mm bore stop valves, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

Supply and fix Vitreous china Urinal full stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed

S&F for Vitreous China Urinal, Half stall type, white, with grating and union for discharge pipe including CP Urinal spreader any colour with 15mm dia connection pipe and fitted in the wall proper with the help of CP Screw and make Hindware/Cerra/Parryware

S&F PVC waste pipe for urinal with complete fitting etc 38 mm dia.

S&F for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 300mm long 100mm wide and 350mm deep in PCC 1:2:4 type B0 using 12.5mm grade stone aggregate jointed in CM 1:4 complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil.

M&L for Precast cement concrete rubber moulded coloures interlocking tiles 60mm thick with grey cement and pigment og approved design and pattern laid over a layer of 25mm thck sand cusion including filling the joint with sand complete all as specified.

S&F for Roof trusses (framed)/columns, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats, base plate, welding work complete including base plate nut and bolt (450mm) 4nos each column long etc.

M&L for 150 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base.

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

S&F PVC (SWR) junction single, (Single T) any radius 110 mm bore equal or unequal.

Cutting chases, pinning in, in brick walls and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills sunshades, shelves etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth all as spd and directed.

S & F Nipple suitable forHDPE water tank.(Minimum weight 15mm-38gms)

S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union.

S&F fancy type brass chromium plated with long shank and cup (concealed type) 15mm bore stop valves, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

M&L for plain cement concrete type C1 1:3:6 (20mm graded stone aggregate) as in copings.

M&L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in benching, finishing surfaces of concrete.

S&F steel windows with or ventilators, fixed type, with glazing bars

M& L salt glazed stone ware 100mm internal dia pipes laid in trenches and jointed socket end with packed spunyarn and cement mortar1:1.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round) in cement concrete 1:2:4 type B1 smooth finishing and reforming benching as required for 150mm dia pipe.

S&F anodised designer grill of 5.5 mm dia and aperture of 75mm fixed with and including aluminium flat section of size 50 x 1.5 mm complete all as specified and directed.

S& F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flats bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified.

Taking down submain wiring including all accessories complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (FR) multi strand PVC insulated and unsheathed copper conductor cable in and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FR) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

All as per item 203 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

M&L for sub main wiring with two single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FR) and one run of 4.0 sqmm (FR) copper conductor shall be measured as one unit length.)

S&F sheet metal enclosure factory fabricated for Multiphase Out going suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable Amp rated bus bar having IP-42 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified. Cat No - DBVDD04160TAB -MCCB of HPL or Equivalent Model Havells/Standard/Shalabh Switchgear/Indo Asian/Legrand as Approved by GE. ( Note : MCCB & MCB Shall be Measured and Paid Separately )

S&F for MCCB 100 Amp, 10 KA / 15KA 3 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed by the Engr-in-Charge.

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F switch socket combination out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F bell push flush type 5 Amp

S&F bell ding dong musical ,AC, 230 Volt, single pole

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

Supply and fix in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B6-32 of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

S&F in replacement mirror light fitting of 1 x 20 watt T-5 lamp type with electronic ballast of suitable capacity, clear acrylic cover including mounting on wall complete all as specified and directed.

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Taking down carefully Unserviceable ceiling/ exhaust fan including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Supply only LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. Model -LTHPLED22W/B22 of Make C&S or equivalent in Philips/ Havells.

Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. Model-BCLST 20W LED of Make- BAJAJ or eqvlt in Philips/ Havells.

S&F porch light surface type LED Ceiling tile type fittings 18 Watt, with integrated electronic driver dimensions 300 x 300 mm connected with 3 core 23/.0076 insulated copper wire from ceiling rose to fitting connector, with hanging arrangement complete all as specified and directed Model -BZSSQL 18W WH of Make- BAJAJ or eqvlt in Philips/ Havells.

S&F bulk head light fitting, 1x10W attractive surface mounted type, with sheet steel housing with opal acrylic diffuser and decorative end plates. Plastic housing wire and ballast , suitable for mirror fittings, , lamp holders, connector blocks incl LED lamp10 Watt etc. complete with all accessories in and including connecting up with twin core twisted flexible copper conductor cable with suitable size copper wire complete all as specified and directed. Make Bajaj Cat pt No. CG801B10W LED of Make C&S or equivalent in Philips/ Havells/ Bajaj.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 core as required at site.

Sand cushioning for cables all as specified and directed . Note:-Punned sand layers measured only.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

M & L for GI tubing light grade 40 mm bore complete with all fittings like bends, sockets, elbows etc for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

S&F LED retrofit tube with PVC extruded battern 20watt 4 feet white Make C&S , Crompton greaves, Philips,Surya complete all as specified and directed.

S&F LED bulk head luminaries with lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 volt 50 Hz including 6 Watt LED Make C&S Cat No CG801B6WLED or eqvalent make of Philips/Crompton Greeves all as speified and directed.

S&F Miniature circuit breakers (MCBs) ISI marked 240 Volt, 50 Hz, single pole 6-32 Amps, breking capacity 10 KA Make Indo Asian or equivalent.

S&F Miniature circuit breakers (MCBs) ISI marked 240 Volt, 50 Hz, SPN 40-63 Amps, breking capacity 10 KA.Cat No DHMCCSNF040/50/63of Make - Havells/Cat Part No 408618/19/20 of Make Legrand/Cat part No NCN240N/50N/63N of Make Hager or equivalent Make of L&T/Scheneider complete all as specified and directed.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectiuons suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat or circular of size 6 Sqmm all as specified.

Supply, installing, testing and commissioning exhaust fans heavy duty 300 mm sweep, 230 volt, AC, 50 Hz single phase with louvers make Standard complete and including connecting up with flexible three core copper conductor from ceiling rose to fan connector etc all as specified. Make - Bajaj/Havells or equivalent approved make.

S&F in replacement mirror light fitting of 1 x 9 watt LED type of size 2 fit , clear acrylic cover including mounting on wall complete all as specified and directed.

S&F sheet metal enclosure SPN DB 04 Way with double door IP-42 protection detechable blend plates, flush mounting for MCB fitted with Busbar, earthbar and neutral links.

Notes:-

M/S Gupta and Company

M/S Harshri Nath Enterprises

Goel Enterprises

Shikhar ji Enterprises

hardeep singh enterprises