Providing Rythu Bazar at Market Yard, Narasaraopet of A.M.C, Narasaraopet in Palnadu District

Removing of Existing Damaged A.C. Sheets including stacking the sheets etc., complete for finished item of work.

Roofing with 6 mm thick corrugated asbestos cement sheets, fixing with G.I ‘J’ bolts & nuts 8 mm dia G.I plain washers etc., complete for finished item of work

Supply and fixing of Tar felt sheet including cost and conveyance of all materials and all labour charges etc., Complete.

Roofing will be provided with 0.5 mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

VRCC M - 20 grade mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. For Lintel Beam.

Providing High yield strenghth deformed bars of Fe 415 grade of different diametres, cuttings and bending to the required sizes and shapes, placing in position with cover blocks of approved materials and sizes tying firmly with MS binding wire forming grills for reinforcements work as per approved drawings to be supplied at the time of execution of work, including cost and conveyance of deformed bars, labourcharges such as cutting, bending, placing in position, tying etc., complete for finished item of work (payment will be made on the basis of weight of fabricated deformed bars only) as per standard specifications and as directed by the departmental officers.

VCC M20 Nominal mix using 20mm graded metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and all materials steel centering, shuttering machine mixing, laying concrete, vibrating, lift charges etc., complete for finished item of work as per standard specifications.

Brick massonary in cm (1:6) using second class bricks having a crushing strength of not less than 35kgs per sqcm including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges such as mixing mortor, construction of massonary, scaffolding, curing etc., complete for finished item of work as per standard specifications. For Superstructure

Supply and fixing of Rolling Shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Fabrication, supply and fixing of 50 X 50 mm pipe of 2.60mm well thickness for Purlins including cost and conveyance of all materials and all labour chargesetc., complete

Fabrication and supply of 60.30 mm OD MS new pipe for Purlins of duly welding with 150 x 75 x 6 mm thick cleats on both sides of pipe and including cost and conveyance of all materials and including painting with red oxide etc complete for finished item of work as per standard specification

Plastering with C.M (1:5) 12mm thick including cost and conveyance of all materials to site from approved sources, including providing and removing necessary scaffolding, of all materials, labour charges, curing with all water leads and finishing smooth to perfect plumb including all other incidental and operational charges etc., complete as per standard specification and as directed during execution by departmental officers.

Painting to New walls with 2 coats of plastic emulsion paint of Over 1Coat of primer approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911

Painting to New Iron work two coats with synthetic enamel paint of 1st grade of approved brand and colour over primary coat including cost and conveyance of all materials labour charges for cleaning, removing the dust, rust and other foreign particles by sand papering including cost of brushes, sand paper, scaffolding charges including all incidental and operational charges etc., complete for finished item of work as per standard specifications and as directed by engineer-in-charge at site

Painting to Old Iron work with synthetic enamel paint of approved brand and colour of ISI Make including cost and conveyance of all materials such as enamel paint sand paper and brushes etc., complete for finished item of work.

Filling with 2.36 mm HBG Chips and bellow in foundations trenches and basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges etc., complete for finished item of work as per standard specifications.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose and 6 Modular Cover Frame to switch control box including all labour charges etc., complete For Light point and light points in Non-Residential Buildings.

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with earth continutity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : As per list of recommended brands as category I.

Supply and Fixing of 25mm dia 1.80mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan asper IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200 cubic meter/min but without Regulator.Makes : Crompton / Bajaj Kassels 50 / Usha atom including cost and conveyance of all materials and all labour charges completed

Supply of 2 Module Modular type electronic step type Fan Regulator ISI marked Makes: As per list of recommended brands as category I.

Brick masonry in cm (1:6) prop: using 2nd class traditional well burnt bricks including cost and conveyance of all materials and labour charges for all items of work, like cement, sand, bricks, curing etc., to site including scaffolding charges and lifting charges, proper soaking of bricks, the walls should be truely to plumb and maintaining joints and filling of joints with motor etc., complete as per standard specification and as directed by the Engineer-in-charge for finished item of work. For Superstructure

Plastering with cm(1:5) 12 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by theEngineer – in – charge at site for external surface as per standard specifications.

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300mm and thickness between 7-8 mm and 1st quality conforming to IS:13711,IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades anddesigns, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water, tiles etc., and including all operational incidental charges and all labour charges etc., complete, but excluding seigniorage charges, for finished item of work or as directed by the Engineerin-Charge

Dadooing to walls with glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand, water and tiles etc., and including all operational & incidental charges and all labour charges etc., but excluding seigniorage charges, on materials,complete as per drawing and technical specifications for finished item of work or as directed by Engineer-In-charge.

Supply and fixing of country wood door of size 0.75x2.10 m with frame size 0.075x0.10m of verticals 2 No's and horizontal 1 No with 35mm thick flush door shutter with commercially and providing Aluminium Butt hinges-150mm Long 4 no's, Aluminium Aldrop 300mm long 1 no, Aluminium Door Handles 150mm Long 1no, Aluminium Tower Bolt-10 mm Bolt 150mm Long 1 no, including cost and conveyance of all materials and all labour charges etc., completed for finished item of work.

Supply and fixing of country wood door of size 1.05x2.10 m with frame size 0.075x0.10m of verticals 2 No's and horizontal 1 No with 35mm thick flush door shutter with commercially and providing Aluminium Butt hinges-150mm Long 4 no's, Aluminium Aldrop 300mm long 1 no, Aluminium Door Handles 150mm Long 1no, Aluminium Tower Bolt-10 mm Bolt 150mm Long 1 no, including cost and conveyance of all materials and all labour charges etc., completed for finished item of work.

Supply and fixing of teak wood glazed ventilator of size 0.60 x 0.90 mtrs with frame of 118 x 68 mm and horizontally fixed with 10 mm dia M.S. Rods 8 No's and 4 mm thick float galss pannels of size 480 x 125 mm 10 No's including cost and conveyance of all materials and all labour charges etc., complete.

Painting to New walls with 2 coats of plastic emulsion paint of Over 1Coat of primer approved brand and shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item ofwork as per SS 911

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) : 28.60 mm OD SDR 11 Pipe

S&F 12.7 mm N.P bib tap Indian make heavy dutys including cost and conveyance of all materials and all labour charges etc., complate

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillarcock

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 including cost and conveyance of all materials and all labour charges complete.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm including cost and conveyance of all materials and all labour charges complete.

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'P' trap including cost and conveyance of all materilas and all labour charges etc., complete

S & F internal fittings for flush tank Parryplast wonder flush or equivalent including cost and conveyance of all materilas and all labour charges etc., complete BMW-I.16

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers asperIS2548-1996 including cost and conveyance of all materilas and all labour charges etc., complete

Supply and Fixing of 25 mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings.

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with earth continutity including wire leads, earth connections along with all labour charges etc., complete.

Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes : As per list of recommended brands.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes : As per list of recommended brands as category I.

Supply and fixing of batten holder/ slanting holder in lieue. of ceiling rose of light point complete with all connections and all labur charges with 7W LED bulb (for new installation) as per standard data.

Supply and run of 2 of 6 Sqmm WPSC alluminium cable along with No.10 SWG G.I. bearer wire on both sides through PVC cleats with all accessories including all labour charges etc., complete..

Supply and installation of 250 LPH fully automatic plant with Reverse Osmosis Technology which consists of 1000Ltrs raw water storage tank with two layers (Syntex or Nandi or ocean make) and stainless steel tank (SS 304) of 500 Its for protected water with F. R. P. 844 multimedia vessel (Pentair / Aventura make) with auto multipurpose volve including required sand and carbon layers with raw water motor of 0.5 HP (CRI make) and 20" long slim model 0.50 micron cartridge filters-2Nos and slim hosing with all necessary accessories with multi stage vertical high pressure pump CRI 2-9/Equivalent CRI Make with low and high pressure indrcators and skid duly name board provision Including stickering with electrical control panel board of GCM technology including 4" dia R.O membrane pressure housing with all necessary accessories UKL make and 4" dia R.O membrane Hydranautic with anti scalent dozing pump make Scale doze and flow meters, pressure gauges and flow sensors with necessary internal UPVC pipe line for protected witer and PVC pipe line for raw water and waste water with required valves, tees, L.bows, couplings, unions and reducer etc., and separate pipe line and internal electrification including cost and conveyance of all materials and all labour charges for transportation and installation charges etc., complete.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes) 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

28.60 mm OD SDR 11 Pipe

22.20 mm OD SDR 11 Pipe

Brick masonry in cm (1:6) prop: using 2nd class traditional well burnt bricks having crushing strength not less than 40kgs/sqcm including cost and conveyance of all materials and labour charges for all items of work, like cement, sand, bricks, curing etc., to site including seigniorage charges and scaffolding charges and lifting charges, proper soaking of bricks, the walls should be truely to plumb and maintaining joints and filling of joints with motor etc., complete as per standard specification.

V.R.C.C. M20 grade using 20mm size HBG machine crushed chips as per SS 108 from approved quarry incluidng cost and ocnveyance of all materials like cement,fine agreegate (sand) water,etc., site and cost of seignorage charges, all labour charges, including steel centering, shuttering, machine mixing,laying concrete,vibrating,lift charges,curing etc., compelte but excluding cost of steel and its fabrication charges for finished itme of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand, water and tiles etc., and including all operational & incidental charges and all labour charges etc., but excluding seigniorage charges, on materials,complete as per drawing and technical specifications for finished item of work or as directed by Engineer-In-charge.

S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/ Senior/ Nice or equivalent including cost and conveyance of all materials and all labour charges etc., Complete.

Supply and fixing of 150 lts stainless steel body water cooler of make blue star model SDLX150 150C of storage capacity 150 Lts cooling Capacity 150lts/hr with 2 taps are providing proper speed drainage system with SS tray, refrigeraterant R-22 and compressor is rotary type is providing including cost and conveyance of all materials and all labour charges etc.

Supply and fixing of M.S. Grill of size 2.13 x 2.20 mtrs with 40 x 40 x6 mm thick M.S. Angular for alround frame and 10 mm Squire rods horizontally 8 No's and verically 19 No's, and including cost and conveyance of all materials and all labour charges for fixing in position etc., complete.

Supply and fixing of M.S. Grill of size 1.20 x 2.65 mtrs with 40 x 40 x6 mm thick M.S. Angular for alround frame and 10 mm Squire rods horizontally 8 No's and verically 16 No's, and including cost and conveyance of all materials and all labour charges for fixing in position etc., complete.

Supply and fixing of M.S. Grill Door of size 0.63 x 2.10 mtrs with 35 x 35 x 6 mm thick M.S. Angular for alround frame and 10 mm Squire rods horizontally 10 No's and verically 5 No's, and including cost and conveyance of all materials and all labour charges for fixing in position etc., complete.