RC for overhauling of Suspensions Differential gear boxes and Counter balancing axles for Drilling and Work over Rigs

Overhauling of Suspensions as per Scope of Work in para 3.1 excluding fabrication of Bushings as in 3.4

Overhauling of Differential Gear Boxes as per Scope of Work in para 3.2

Overhauling of counter balancing axles as per Scope of Work in para 3.3 excluding fabrication of bushings as in 3.4

Fabrication of Bushing for idler arm reinforced with steel sleeve as per Drawing No. RR-BC-A4-004

Fabrication of rubber Bushing for suspension system reinforced with steel sleeve as per Drawing No. RR-BC-A4-003

Fabrication of Foundation Pad for Engine Mounting as per Drawing No. RR-BC-A4-002

Fabrication of rubber Bushing for Tie-rods system reinforced with steel sleeve as per sample ( Indicative Size: 70 dia x 75 mm )

Fabrication of Foundation Pads for Allision as per Drawing No. RR-BC-A4-001

Fabrication of Rubber Bushing for balancing axle of differential gear box and to press fit on the metallic sleeve. Centre Bushing Size OD 111 mm x 185 mm width x 20 mm thick.

Outer Bushing Size OD 101 mm x 107 mm width x 28 mm thick to be press fitted on metallic sleeve

Fabrication of Rubber gasket for outer bushing size- OD-101 mm x ID-72 mm x 19 mm thick

Main Centre bushing size OD 128 MM X ID101 MM X 72 MM length set of (02 nos.) material phosphorous bronze

counter balance bronze bushings size- OD 62 MM X I.D 51.5 MM X 78 MM length , material phosphorous bronze

counter balance metallic sleeve size- OD 51 MM X ID 32 MM X 78 MM length, material as per sample/forged steel/EN-8

metal spacers size – OD 127 MM X ID 51 MM X 78 MM length, material as per sample/forged steel/EN-8

Metal bushing of approx. size OD 40 MM X ID 32 MM X 97 MM

Bronze bushing of approx. size OD 32.9 MM X ID 30.2 MM X 48 MM