SITC of LED street lights in Internal roads of Kalunga IE-Sundargarh

Amount

Supplying, laying & testing of 1.1 KV grade XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. laid on surface including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes complete with making good to the damages as required and as per direction of Engineer-in-charge.

3.5 core x 35 sqmm Aluminium armoured cable

4 core x 16 sqmm Aluminium armoured cable

Supplying, laying & testing of 1.1 KV grade 3CX1.5sqmm cu. Flexible cable with required termination to connect from base of the pole to the light fittings

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required and as per direction of Engineer-in-charge

3.5 core x 35 sqmm Aluminium armoured cable

4 core x 16 sqmm Aluminium armoured cable

Supply and Installation of 9mtr high galvanised Octagonal pole in shape shall be designed to withstand the maximum wind speed as per IS 875. The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BSEN 40-3-3:2003. Octagonal Poles made from HT Steel Conforming to grade S355 & having thicknessof 3.1mm.Top dia 70mm & Bottom dia 155mm single sharp welding with base plate dimension 250x250x16 mm & Base Plate must be Fe 410 conforming to IS 2062, foundation bolts must EN 8 grade terminal box with provision for connection of earth & neutral on 5mm thick fiber plate which will be kept in side the pole for termination of cable & wire,The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding with round Bracket Suitable for installing 1Nos 90W LED Street Light as required.Warrenty - 5 years on LED luminaire and Warrenty should be given by Manufacturer.

supply & Fixing of 90W LED street light fixture having pressure aluminum housing, System lumen output of 10800 lumen by using high power SMD LED's, driver efficiency >=90%, power factor>=.95,surge protection >10KV ,THD<10%, IP rating IP66,IK ating:IK08, heat resistance toughened glass with IK08 impact resistance, graduation disc for precise aiming of flood lights. The pole must withstand the wind speed at 180 km / hr. (Must provide structrural data) with the light fitting. luminaire , efficacy >=120 lumen/Watt, correlated color temperature 5700K+-500K, color rendering index>=70, lumen maintenance L70 at 50000hrs,THD<10%. The luminaire designed to considering maximum uniformity and avarage lux of 25 within the poles. Warrenty - 5 years on LED luminaire and Warrenty should be given by Manufacturer.

Supply & Fixing of 200W LED Flood light with existing High mast having pressure diacast houseing ,toughened glass and indivisual led with secondary lens optics with IP66 ingress protection.4kv internal in-build and 10kv external surge protection with efficacy >=120 lumen/Watt.

SITC of foundation including excavation & refilling and secured with holding baseplate,bolts,nuts etc as required Including Side shuttering and grouting of foundation bolts and erection of pole as specified above including watering for curing/ ramrning it as per requirement including provision for passage of cables .Octagonal Poles suitable for wind speed as per IS 875 or >= 180 KM/ Hr

Supply delivery installation and testing of outdoor panel board made out of 3 mm thick CRCA sheet duly acid treated and painted as required with following accessories and fixing the board with

I/C:- 40 Amps F.P MCB-01 no

O/G: (i) 32 amps 4P MCB-04 nos with Time switch, Contactor for automatic on / off of the lights with automatic on/off day night photo control sensor and suitable arrangements for 3.5 x 25 sq mm cable for entry & 3 phase indicating lamps etc. complete as per the site requirements.

Supply and layng of 40 mm dia HDPE pipe for cable protection and road crossing.

Sundries (Binding Wire, Insulating Tape,socket and cable accessories etc)

Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required

Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.

Providing and fixing 25 mm X 5mm GI strip on surface or in recess for connection etc as required.

Labour charges for dismantling of Highmast and servicing & greesing of the damage rope using crane as the rope does not move due to bird nests inside the Highmast.

SANSKRUTI ASSOCIATES PRIVATE LIMITED

MESSERS OMM SAI ELECTRICALS

S.P POWER SYSTEM

Gayatri Agency

MESSERS BIRAJA ELECTRICAL AND CONSTRUCTION

M/S SARALA ENGINEERING WORKS

AADYA URJA SOLUTIONS PRIVATE LIMITED

M/S. PRECISION ENGINEERS

ODISA CONSTRUCTION