SPECIAL REPAIR TO CERTAIN QTRS OF JCOs/OR MD

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles etc complete all as specified and directed

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) etc complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair. etc complete all as specified and directed.

M &L for rendering 15mm thick on fair face of brick work in two coats (1st coat 10mm thick in CM 1:6 and top coat 5mm thick in CM 1:4 mixed with WPC finished even and smooth without using extra cement (WPC shall be measured and paid saperately) etc complete all as specified and directed.

M&L for glazed coloured ceramic tiles (300mmx450mm) x 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick cement back coat in CM 1: 4 as on vertical surfaces such as skirting, dados, etc incl dismantling floor hearth or wall tiling including cement mortar bedding and removing debries off the premisis.complete all as specified and directed

M&L for Non Skid ceramic coloured joint free tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 as in floors incl dismantling floor hearth or wall tiling including cement mortar bedding and removing debries off the premisis.complete all as specified and directed

M & L for granite 14-16 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of front side if required including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM 1:6 etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick wall built in CM (1:4) etc complete all as specified and directed.

M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection/ path incl finishing the surface even and smooth w/o using extra cement all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

Cutting holes in brick walls exc half bk wall but n exc one bk wall built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required.

S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 290 -0 Gde E-165.

Taking down shutter only exc 1 Sqm but not exc 2 Sqm each

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 35mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S & F A solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as peccified

S&F for steel windows with side hung shutters incl projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetauiled or welded all as specified & directed.

S&F for steel windows with side hung shutters incl projecting type hinges with steel handles and steel peg stay, complete with out glazing bars, dovetailed or welded all as specified & directed.

S & F 3mm thick ordinary quality glass pane and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm

S & F Mild steel work as in holdfast conforming to Fe 290 -0 Gde E-165.complete all as specified & directed.

M&L for preparation of wooden surface and applying two coats of synthitic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for Preparing old painted wooden surface exc 10 cm width and grith and applying one coat of synthetic enamel paint all as specified & directed.

M & L preparation new steel surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door.

S&F 300mm, ordinary rat tail rod pattern springs including roller and rollerplatecomplete

S&F butt hinges 125mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed.

S&F butt hinges 100mm extruded aluminium alloy with galvanized mild steel hinges pin anodised and fixed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F 100mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section all as specified

M & L for cement concrete interlocking grey tiles 60 mm thick with coloured cement and no pigment laid dry with 20 mm thick sand cushioning over PCC bed ( PCC bed to be paid sapretely). all as specified & directed.

M & L for Cement concrete type D-2 1:4:8 75 mm thick using 40mm graded crushed stone aggregate all as specified & directed.

S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor incl taking down CI / AC/ PVC pipe in any dia, complete all as specified and directed.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as spd. And directed.

S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm incl taking down CI / AC/ PVC pipe in any dia, complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as spd and directed.

S & F 15mm bore galvanized steel tubing, medium grade with all fittings and fixed to walls and ceilings or laid in floors, incl taking up or down 15mm bore GI tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S & F 20mm bore galvanized steel tubing, medium grade with all fittings and fixed to walls and ceilings or laid in floors,incl Taking up or down 20mm bore GI tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B1 smooth finished & reforming benching as required for 150mm dia pipe complete all as specified and directed.

M&L for Integral water proofing compound .

M&L precast RCC 1:2:4 type B-1 using (12.5 mm graded stone aggregate) in manhole covers incl necessary form work and set in CM 1:4 complete incl demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for as in old septic tanks.

M&L Mild steel TMT steel reinforcement bars 10mm dia and over cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire(annealed) not less than 0.9mm dia complete all as specified and directed.

S & F in repair 15 MM bore concealed stop valves long shank and cup cast copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.

Dismantalling water tank and removal from site exc 250 ltr and n exc 500 ltr all as specified & directed.

M &L for rotational moulded polyethene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified 500 ltr capacity.

S & F in repair CP pillar tape cast copper alloy with crutch or butterfly handles , screwed down for iron pipes , 15 mm bore fancy type complete all as specified and directed.

S&F Ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic wall, screwed for iron pipe and fixed in repair 20mm bore all as specified & directed.

S&F water closet vitreous china squatting pan,Orissa pattern size 580x440mm white with integral foot rests ( excluding flushing cistern and flush pipe) and including with 'P' or 'S trap complete including' provison of lime concrete bedding fixed in repair etc complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float and handle including brackets and flush pipe PVC 32mm dia of required lengh fixed in repair complete all as specified and directed

S & F in repair CP bib tape cast copper alloy with crutch or butterfly handles , screwed down for iron pipes , 15 mm bore fancy type complete all as specified and directed.

S & F in repair CP angular stop cock 15 mm bore complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps , waste Chain and plug and porcelain stopper but including brackets etc complete all as specified and directed.

S&F Towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats etc complete all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats etc complete all as specified and directed.

M&L PVC floor trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs all as specified and directed.

S&F Swivel shower of PTMT with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT of any colour for fixing with 15mm pipeall as specified and directed.

S&F PVC connection 15mm x450mm with PTMT nuts and nylon washer complete all as specified and directed.

S&F Waste fittings of PTMT full threaded 32 mm, in repair.all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying 1.5mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M & L for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and directed.

M&L for ceiling plastered 10mm thick ceiling on fair faces of brick work or concrete surfaces CM ( 1 : 4 ) all as specified

Cutting chases pinning in brick walls good to facing where required and pointing in (1:3) to ends or edges of slabs and making good cutting exc 10 cm but n. exc 20 cm girth etc complete all as specified and directed.

Demolition of cement concrete/tiles/kota etc in ground floors and paving n exc. 15 cm thickness (below or above ground level) unreinforced concrete & removal of rubbish, beyond defense land complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in CM (1:3) finished even and smooth w/o using extra cement and using waterproofing compound on fair faces of brick work or concrete surfaces NOTE: WPC will be measured and paid for separately.)

M&L for laying APP membrane of 3.5 Kg Per Sqm including overlapping and sealing complete all as specified and directed

M&L for PCC 1:4:8 type D-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate.

M & L Point wiring with 1.5 Sqmm(Nominal area) PVC insulated and PVC unsheathed FRLS multi stranded copper conductor single core cable drawn through and including PVC non metallic conduit of 20 mm dia ISI marked with complete accessories,including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly , including taking down of existing point wiring and their connected items/accessories, fittings and fistures complete making making good surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for the following :- Note:- The quoted rate is deemed to be included rate of dismantling of existing point of any type including fittings & fixtures complete. (a) One light point controlled by one one way switch.

(b) One fan point controlled by one way switch.

(c) One 3/5 pin socket outlet 5 Amp on the same board with other switches

(d) One 3/5 pin 5 Amps socket outlet on independent board.

(e) One bell/buzzer point controlled by one push button.

All as per item No 82 above here in but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor as per colour coading for earth contineuity all as specified.

S&F switch piano flush type polycarbonate single pole one way 5 Amps.

S&F switch piano flush type polycarbonate single pole one way 15 Amps.

S & F bell push flush type 5 Amps

S & F Bell electric AC 230 Volts single pole ding dong type complete all as specified and directed.

S & F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type

S & F socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type

Supply & Fixing batten holders PVC/polycarbonate type with back plate, fixing on 3 mm thick hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

S & F in replacement of electronic fan regulator 230 volts, step type(5 step) socket type complete all as specified and directed.

S & F ceiling rose in poly carbonate 3 terminal brass, 6 Amps, 230 Volts AC ISI marked, fixing on 3 mm thick hylum plastic laminated round sheet 75mm dia complete all as specified and directed

S&F in replacement of LED tube light fitting 1 x 20 Watt LED batten type with bipin holders compelete with all accessories and including LED glass/polycarbonate tube light 20 watt double ended and making connections with the help of three core PVC insulated unsheathed copper conductor multistranded wire of suitable length complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of LED street light Luminaire 25 Watt with pressure die cast housing alongwith prismatic polycarbonate diffuser and LEDs with secondary optics and IP65 protection including brackets made out of GI pipe light grade of suitable dia or as per manufacturerer recommended, bent to shape incl 02 Nos MS flat bent to shape incl 02 Nos MS flat clamps, nut bolts, termination with the help of 3 core 2.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable complete all as specified and directed by Engineer-in-Charge.

S & F LED bulb of 15 watt suitable for batten/angular holder Complete all as specified & directed by Engineer-in-charge. Appx.

S & F in replacement of TPN DB 4 way double door metal type to flush wall complete all as specified and directed by Engineer in Appx.

S & F in replacement of SPN DB 8 way double door metal type to flush to wall complete all as specified and directed by Engineer in Charge.

S & F in replacement of MCB TPN 40-63 Amps AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/thimbles complete.

S & F in replacement of MCB SPN 40-63 Amps AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/thimbles complete.

S & F in replacement of MCB SP 6-32 Amps AC 230 Volts, 'C' curve series with 10 KA breaking capacity including necessary lugs/thimbles complete

S & F in replacement of Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down through and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 6 Sqmm single core multi stranded copper conductor cable as earth continuity conductor. Note : Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm/approprite dia shall be measured as one run length of submain.

M & L for Dismantling ceiling/exhaust of any type and deposit to MES fan store in safe custody also includng hanging them to existing place after completion of all type of building and electrical work including making electric connections with suitable size of flexible wire complete all as directed by Engr-in-Charge.

S & F Exhaust fan 300 mm sweep with louvers, 240 volt, single phase including making connection and cutting holes of suitable dia for exhaust fan in any type of wall including finishing and make good as per existing surrounded wall complete all as directed by Engr-in-Charge.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre deep below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

M/S RAJESH ARORA

KISHORE CHAND DINESH CHAND

Alankar Traders

AMARJEET SINGH AND CO.

shreyansh construction

VERDHMAN ASSOCIATES

Bhardwaj Construction Co

KOHLI BUILDERS